Get Your Free Wildfire Preparedness Guide

Understanding Wildfire Risk in Your Area

Wildfires pose serious threats to communities across North America, and understanding your local risk level is the first step in preparedness. According to the National Interagency Fire Center, the United States experienced an average of 7.2 million acres burned annually between 2000 and 2022. This trend has intensified in recent years, with 2020 marking one of the worst fire seasons on record, burning over 10 million acres.

Understanding Your Senior Renewal Options →

Your risk level depends on several factors specific to your location. Areas within or near wildland-urban interfaces—where homes are built near natural vegetation—face higher exposure. Communities in western states like California, Oregon, and Washington report the most frequent large fires, but wildfires now occur in every state. Even areas that have never experienced wildfires in recent memory can face new risk as climate patterns shift and drought conditions become more common.

To understand your specific risk, you should know your local geography. Homes on hillsides, in canyons, or surrounded by dense trees and brush face different threats than those in more open areas. Wind patterns also matter significantly—fires spread faster uphill and with prevailing winds, meaning a fire starting miles away could still threaten your property depending on terrain and weather.

A wildfire preparedness guide typically includes information about how to research your community's fire history. Many counties and fire districts maintain records of past fires, their sizes, and damage patterns. State forestry agencies and local emergency management offices often provide maps showing wildland-urban interface areas and fire-prone zones. The USDA Forest Service and Bureau of Land Management websites contain data about federal lands where fires frequently occur.

Practical takeaway: Spend time learning about your local area's fire history over the past 20 years. Contact your county fire department or emergency management agency to ask about past fires in your region, how close they came to residential areas, and what evacuation routes were used.

Creating a Home Hardening Plan

Home hardening refers to specific modifications that reduce a structure's vulnerability to wildfire damage. Research from the Insurance Institute for Business and Home Safety shows that most homes destroyed in wildfires are lost to embers and small flames reaching vulnerable areas rather than direct contact with the main fire. This means strategic improvements to your home's exterior can significantly reduce risk.

Free Guide to Cooper Tire Rebate Programs →

The most critical areas to address are your roof, gutters, vents, and the space immediately surrounding your home. Roofing materials matter considerably—Class A fire-rated materials like asphalt composition shingles, metal roofing, or clay tiles resist ignition far better than wood shakes. If your roof is nearing the end of its life, replacement with fire-resistant materials represents one of the highest-impact improvements you can make.

Gutters filled with pine needles, leaves, and other debris catch embers easily and can ignite. Keeping gutters clean and considering gutter guards (mesh screens that allow water through while blocking debris) prevents this common ignition point. Vents in your soffits, foundation, and roof also present vulnerabilities. Embers can enter through 1/8-inch openings. Installing vent covers made of 1/8-inch metal mesh prevents ember entry while maintaining necessary airflow.

Windows and glass doors are weak points during wildfires. Single-pane windows offer minimal protection against radiant heat. Tempered glass is stronger than standard glass but costs more. Some homeowners choose to install exterior metal shutters on windows facing wildland areas, which can be closed when evacuation is needed or when a fire approaches. Decks and wooden balconies attached to homes can become fuel sources. If replacement is possible, composite or metal decking resists ignition better than wood.

A comprehensive guide typically provides checklists for home hardening organized by urgency and cost. High-priority, lower-cost improvements might include gutter cleaning and vent screening. Medium-priority items involve replacing damaged exterior materials. Major projects like roof replacement or new windows require significant investment but yield the greatest protection.

Practical takeaway: Walk around your home's exterior with a notebook and photograph areas where embers could enter or where vegetation touches siding. Identify which improvements are most feasible for your situation and timeline, starting with clearing gutters and installing vent screens.

Defensible Space and Vegetation Management

Defensible space is the term fire professionals use to describe zones around your home where vegetation has been reduced or managed to slow fire spread and reduce ember exposure. The concept involves three zones extending outward from your home, each with specific management goals. Research from the Firewise USA program demonstrates that homes with well-maintained defensible space have significantly higher survival rates during wildfires.

Free Guide to Financial Assistance Options Available →

Zone One extends 5 feet from your home's foundation. In this area, remove all dead leaves, needles, twigs, and branches from the ground. This includes sweeping gutters, removing pine cones, and clearing roof valleys. Cut back tree branches so they do not hang over the roof or touch chimneys. Remove tree limbs within 10 feet of your chimney opening. Keep the ground clear of mulch, which can catch fire—if you use mulch, keep it at least 5 feet from your house. Small shrubs in this zone should be spaced so their canopies do not touch.

Zone Two extends from 5 to 30 feet from your home. This intermediate zone acts as a transition area. Remove small trees and lower branches from larger trees, creating a "canopy lift" where no branches hang lower than 6 to 10 feet from the ground. This prevents fire from climbing from shrubs into tree crowns. Space trees so their canopies do not touch each other—typically 10 to 20 feet apart depending on tree height. Remove dead trees entirely or limb them heavily. Thin dense stands of young trees, removing trees less than 8 inches in diameter at breast height.

Zone Three extends from 30 feet outward to property lines or further if your property is large. Here, the goal is selective thinning. Remove smaller, weaker trees to reduce competition for water and nutrients among remaining trees. Healthy, well-spaced trees are more fire-resistant than weak, crowded ones. Continue removing dead wood, diseased trees, and lower branches from standing trees. If your property backs onto wild land, extend management as far as practical.

A wildfire preparedness guide includes species-specific recommendations for your region. In western pine forests, focus on removing firs and small pines while favoring larger, mature ponderosa pines. In chaparral areas of California, remove dead chamise and sage. In the Southeast, thin dense hardwood stands and remove pine reproduction from under oak canopies. Local fire departments and county cooperative extension offices provide regional plant lists identifying which species are more or less fire-resistant.

Practical takeaway: Create a defensible space map of your property showing the three zones and the specific work needed in each area. Prioritize Zone One immediately, then develop a multi-year plan for Zones Two and Three, which can require significant labor and possibly professional help.

Evacuation Planning and Assembly Points

Evacuation is a critical aspect of wildfire safety, and having a personal evacuation plan ensures you and your household can leave quickly and safely when ordered. During the 2018 Camp Fire in California, the deadliest wildfire in the state's history, poor evacuation conditions and unclear routes contributed to 85 deaths. Planning in advance prevents panic-driven decisions during an actual emergency.

Learn About Zips Membership Programs and Benefits →

Your evacuation plan should identify at least two separate routes out of your neighborhood. This matters because wildfires spread rapidly and can block primary routes within minutes. Study your local road network and identify alternate streets that lead away from wildland areas. Drive these routes at different times of day to understand traffic patterns and travel times. Note where these routes intersect with main evacuation highways. If you live in a rural area with limited road access, identify the safest direction to travel and the largest nearby town or city where you could shelter.

Designate a meeting location where household members will reunite if separated during evacuation. This location should be outside the fire-prone area—ideally in another town. Family members should memorize this address. Also identify a contact person outside your state whom everyone can call to report their location if you become separated. During emergencies, long-distance calls often work when local lines are busy.

Prepare an evacuation bag or "go bag" that stays packed and ready during fire season. This should include documents (insurance papers, mortgage deeds, titles, health records), medications and medical equipment