Get Your Free Water Filter Setup and Maintenance Guide

Understanding Water Filter Types and How They Work

Water filters remove unwanted substances from drinking water through different methods. Each type of filter works differently and removes different contaminants. Learning about these options helps you understand what each filter can and cannot do in your home.

Learn How Discover Card Welcome Offers Work →

Pitcher filters, also called pour-through filters, use activated carbon to reduce chlorine taste and odor. You fill the pitcher with tap water, and gravity pulls it through a replaceable cartridge. These filters sit on your counter or in your refrigerator. According to the EPA, activated carbon can reduce certain pesticides and volatile organic compounds. However, pitcher filters do not remove bacteria, viruses, or minerals. Most pitcher filters last about 40 gallons before needing replacement, which equals roughly two weeks for an average household.

Faucet-mounted filters attach directly to your kitchen sink tap. Water passes through a small cartridge as it flows out. These filters also typically use activated carbon and can reduce chlorine, sediment, and some chemicals. The advantage is that you get filtered water without taking up counter space. The disadvantage is that water flow may decrease slightly, and some cartridges last only 30 gallons.

Under-sink filters install beneath your sink in the cabinet space. A separate small tap dispenses filtered water while your regular tap continues to work normally. These systems often have larger cartridges and can filter more water than pitcher or faucet-mounted options. Under-sink filters can include multiple stages of filtration, such as sediment removal followed by carbon filtration. Some households find these systems more convenient because they do not require filling or watching water flow through a pitcher.

Whole-house filters treat all water entering your home. These large systems connect to your main water line where water enters the house. They protect all appliances, showers, and faucets. Whole-house filters typically handle sediment, chlorine, and some chemicals. However, they are more expensive to install and maintain than point-of-use filters.

Practical Takeaway: Different filters remove different contaminants. Pitcher and faucet filters work well for improving taste and reducing chlorine but do not remove bacteria or viruses. Under-sink and whole-house filters offer broader filtration but require more space and investment. Consider what contaminants concern you most in your water before choosing a filter type.

Identifying Your Water Quality and What to Test

Before buying a filter, understanding your water quality helps you select the right system. Your water source, whether municipal or from a private well, affects what contaminants might be present. Municipal water is regulated and tested regularly by local water authorities. Well water is typically the homeowner's responsibility to test.

How to Clean Your Bathing Suit the Right Way →

Your municipal water authority provides a free annual water quality report called a Consumer Confidence Report (CCR). This report lists contaminants detected in your water supply and their levels. You can request this report from your local water department or find it on their website. The report shows whether lead, bacteria, nitrates, or other substances appear in your water. This information is valuable because it tells you what your local system does not remove, helping you decide what your home filter should target.

Private well owners should test their water at least once per year, and more often if they notice changes in taste, odor, or color. Basic well water tests check for bacteria, nitrates, and pH. More comprehensive tests can identify pesticides, minerals, and volatile organic compounds. Many state health departments offer testing services at low cost or recommend certified laboratories in your area. Well owners can call their county extension office for local testing resources.

Common contaminants to understand include:

• Chlorine and chloramines: Added by municipal systems to kill bacteria. They affect taste and odor. Activated carbon filters remove these effectively.
• Lead: Can enter water through old pipes or solder. Lead poses serious health risks, especially for children. Filters labeled for lead reduction require NSF certification.
• Bacteria and viruses: More common in well water. Pitcher filters do not remove these. You need filters with ultrafiltration or reverse osmosis membranes.
• Sediment: Fine particles that make water cloudy. Pre-filters catch sediment before other filter stages.
• Nitrates: Often found in agricultural areas. Reverse osmosis filters remove nitrates, but standard carbon filters do not.
• Hard minerals: Calcium and magnesium make water feel sticky and cause scale buildup. Water softeners remove these, but filters typically do not.

If you notice your water has an unusual taste, odor, or appearance, this suggests specific problems. Rotten egg smell typically indicates sulfur. Brown or yellow color suggests iron or manganese. A metallic taste could indicate copper. These observations help you communicate with a water testing professional about what concerns you.

Practical Takeaway: Obtain your Consumer Confidence Report from your municipal water authority or test a private well through your state health department. This tells you exactly what contaminants are in your water. Use this information to match your filter choice to your actual water problems rather than buying a filter based on general marketing claims.

Setting Up Your Water Filter System

Installing a water filter varies depending on the type you choose. Some filters require no installation at all, while others need basic tools and plumbing knowledge. Understanding the setup process helps you decide whether to install it yourself or hire a professional.

Free Guide to Michigan DMV Appointments →

Pitcher filters require no installation. You simply fill the pitcher with tap water and let it filter. The first pitcher of water should be discarded because new carbon filters release some dust particles. Allow the first pitcher to filter completely, then empty and refill it before using the water. Keep the pitcher in your refrigerator for cold, filtered water. Replace the cartridge according to the manufacturer's schedule, typically every 40 gallons or two months for a household of four.

Faucet-mounted filters also require minimal setup. Turn off your water supply at the faucet. Unscrew the aerator (the small screen at the faucet tip) using an adjustable wrench or pliers. Screw the filter adapter onto the faucet threads. Attach the filter cartridge to the adapter. Turn the water back on and run water for a few seconds to flush the new filter. Most faucet filters come with detailed instructions and take less than five minutes to install. However, check compatibility with your faucet type before purchasing, as some faucets have threads that do not fit standard adapters.

Under-sink filter installation requires more steps but remains manageable for people with basic plumbing skills. You will need:

• An adjustable wrench or appropriate wrenches for your connections
• A bucket to catch water
• Teflon tape for sealing threaded connections
• The filter system with all included parts
• The separate filtered water tap (usually included)

The basic process involves turning off the water supply, disconnecting the water line under the sink, attaching the filter system to the existing water line using compression fittings, and installing a new tap on the sink or counter. The filter system has inlet and outlet lines that connect to your water supply and drain. Most under-sink filters include detailed installation guides with diagrams. If you feel uncomfortable with plumbing connections, a plumber can install it in one to two hours for a typical service fee.

Whole-house filter installation typically requires a professional plumber because it connects to your main water line where water enters your home. This location varies by house and may be in a basement, crawl space, or utility area. Professional installation ensures proper placement and that no leaks develop in this critical location.

After any filter installation, run water for several minutes to rinse the system and activate the filter media. Some filters release carbon particles initially, so this flushing step is important.

Practical Takeaway: Pitcher and faucet filters require no tools and take minutes to set up. Under-sink filters need basic plumbing skills and simple tools, or you can hire a plumber. Whole-house filters require professional installation. Choose a filter type based partly on whether you want to install it yourself or prefer professional setup.

Regular Maintenance and Filter Replacement Schedules

Water filter

How to Calculate Tips: Methods and Factors →