A router reset is one of those troubleshooting steps that sounds scarier than it actually is. Your Verizon router—whether it's the Fios G3100, the older Fios Quantum Gateway, or one of their other models—can develop connection problems for reasons that a reset might solve. Understanding when and why you'd want to reset your router is the first step toward getting back online.
Learn About Paying Your FGUA Bill Online →
Routers maintain information in their memory about your network settings, connected devices, and configuration history. Over time, this data can become corrupted or overloaded. When this happens, you might notice your internet dropping out at random times, devices struggling to connect, or slower-than-normal speeds even though your service plan hasn't changed. Some users report their router becoming unresponsive—where you can't access the settings page or the device simply stops responding to commands.
There's also the scenario where you've made changes to your network settings (like changing your Wi-Fi password) and something went wrong, leaving you unable to connect. Or you might be preparing to sell or give away your router and want to clear all your personal information from it. In all these cases, a reset addresses the underlying issue by returning your router to its factory state.
The key distinction to understand is that there's a difference between a soft reset (rebooting the device) and a hard reset (factory reset). A soft reset simply turns the router off and back on, which can fix temporary glitches. A hard reset wipes all your custom settings and returns everything to how it came from the factory. Most connection problems resolve with a soft reset, so that's usually worth trying first before committing to a full factory reset.
When you perform a factory reset on your Verizon router, the device returns to the exact state it was in when it left the factory. This means all your custom settings disappear. Your Wi-Fi network name (SSID) reverts to the default name printed on the router label. Your Wi-Fi password resets to the default password, also on the label. Any port forwarding rules you set up, custom DNS settings, or parental controls you configured—all gone. Your connected devices will no longer be able to access the network using the old password.
Free Guide to Pay by Plate Illinois Billing →
The physical process is straightforward. On most Verizon routers, there's a small reset button (often recessed so you can't press it accidentally) on the back of the device. You'll use a paperclip or similar tool to press and hold this button for a specific duration—typically 10 to 15 seconds, though the exact time varies by model. Some routers reset immediately, while others go through a reboot cycle that takes a few minutes. During this time, you'll see the lights on the front of the device go dark, then come back on as it reinitializes itself.
What doesn't happen during a reset: your Verizon account information stays with Verizon. Your service isn't affected. The router itself isn't damaged. After the reset completes, the router will still work with your Verizon connection—you'll just need to set everything up again from scratch, starting with connecting to the default network and entering your credentials.
One important note: if you reset your router without first noting your custom settings, you'll need to remember or recreate them. This is why many people take a screenshot or photo of their network settings before doing a reset. Write down your Wi-Fi network name, password, and any other settings you've customized so you can restore them afterward if needed.
Verizon offers several router models, and while the basic reset concept is the same, the specifics vary. The Fios G3100 router, one of the more recent models, has a reset button on the back panel. Locate the small indented button labeled "Reset," and using a straightened paperclip or similar thin object, press and hold it for 10 seconds. You'll see the lights on the front turn off. Release the button and wait for the device to restart—this takes about two to three minutes. The lights will come back on in sequence, indicating the reset is complete.
Free Guide to Mold Removal Methods for Walls →
For the older Fios Quantum Gateway (Model G1100), the process is similar but slightly different. The reset button is also on the back, but you need to hold it for 15 seconds. After releasing, the device reboots. This model takes about three to five minutes to fully restart and be ready for setup.
If you have an even older model like the Actiontec MI424WR, the reset button is similarly located on the back, and you hold it for 10 to 15 seconds. The key with any model is ensuring you hold the button long enough for the router to recognize the reset command—too short and nothing happens.
After the physical reset completes and the lights stabilize, you'll need to reconnect. Open your computer's Wi-Fi settings and look for the default network name, which is usually printed on a sticker on your router. It might look something like "Verizon-1234" or include the router model name. Connect to this network using the default password from the same sticker. Once connected, open a web browser and navigate to the router's admin page (typically 192.168.1.1 or myfiosgateway.com for newer models) where you can enter your Verizon credentials and reconfigure your network settings.
Not every internet problem calls for a reset, but certain situations almost always improve after one. If your router is freezing or becoming unresponsive—meaning you can't access its settings page or it stops transmitting Wi-Fi without warning—a factory reset often brings it back to life. This is especially true if you haven't restarted it in several months and can't remember when you last configured anything.
How to Delete Your Fitbit Account Guide →
Connection instability that persists despite multiple reboots is another strong candidate for a reset. If you're experiencing frequent disconnections, devices randomly losing their connection to the network, or speeds that fluctuate wildly throughout the day without any change in your service, a reset can clear out corrupted settings that might be causing the problem. Sometimes routers get into a state where their configuration has become tangled or contains conflicting rules, and a factory reset is faster than trying to debug those settings manually.
Security concerns also warrant a reset. If you've had your router for several years and can't remember your Wi-Fi password or admin password, or if you're concerned that someone unauthorized has accessed your network settings, a reset ensures everything reverts to its secure defaults. This is especially relevant if you're planning to sell your router—a reset prevents the new owner from seeing any of your personal information or network history.
However, a reset isn't necessary for every problem. If your internet is working but running slowly, the issue might be something entirely different (like your service plan or an issue with your modem). If only one device can't connect, try removing that device from your network and reconnecting it before resetting the entire router. If you've recently changed your Wi-Fi password and devices can't connect, just reconnect them with the new password rather than resetting. These scenarios call for targeted troubleshooting, not a full factory reset.
Once your router has completed its reset and restarted, you'll need to go through an initial setup process. This takes 10 to 20 minutes from start to finish. First, using a computer or smartphone, find the router's default Wi-Fi network name on the sticker attached to the device itself. Connect to this network using the default password listed on the same sticker.
Learn How to Grow Sweet Corn at Home →
Next, open a web browser and navigate to the router's admin page. For Verizon Fios routers, this is often myfiosgateway.com or 192.168.1.1. Your browser will ask for login credentials. For a newly reset router, the default username is usually "admin" and the default password is also printed on the router's label. Once you log in, you'll be guided through a setup wizard that walks you through reconnecting to your Verizon service.
The wizard will ask for your Verizon account information. This is how the router re-authenticates with Verizon's network. You'll need your account number and PIN, or you may be able to use your Verizon online login credentials. The router will test the connection to
This guide is for general information only and is not medical, financial, legal, or other professional advice. For decisions specific to your situation, consult a qualified professional. See our Editorial Policy.