Building stairs that are safe, level, and built to code requires understanding stair stringers—the diagonal support beams that hold the entire staircase together. Our free guide walks through the core concepts of stringer construction, the math involved, and the materials you'll need on hand. This isn't promotional material or a sales pitch; it's a straightforward educational resource about how stair stringers work and what goes into building them correctly.
Learn About Paying Your FGUA Bill Online →
The guide focuses on residential stair construction, which is where most DIY builders start. It covers the relationship between rise (the vertical height of each step) and run (the horizontal depth), explains how these measurements determine stringer layout, and shows why these proportions matter for safety and comfort. You'll also find information about the different types of stringers—open stringers, closed stringers, and housed stringers—and when each type is used in real construction situations.
The material includes practical sections on reading a framing square, using a carpenter's square to mark stringers accurately, and understanding building codes that apply to residential stairs in most areas. Building codes exist for a reason: stairs are a common source of falls and injuries in homes. The guide explains why codes set minimums for tread depth (usually 10 to 11 inches), riser height (7 to 8 inches maximum), and handrail requirements.
Rather than overwhelming you with everything about stair building in one sitting, the guide is structured so you can reference specific sections as you plan or build. Whether you're repairing an existing staircase, adding new stairs to a deck, or building interior stairs in a renovation, you can find the relevant information without sifting through unrelated details.
Practical takeaway: Before you grab a saw, spend 20 minutes reading the section that matches your project type. Understanding your specific scenario—whether it's exterior deck stairs or interior basement steps—will save you from expensive mistakes later.
Stair geometry follows a simple formula, but the formula only works if you measure correctly. The two main measurements are total rise (the overall height from the bottom of the staircase to the top) and total run (the total horizontal distance the staircase covers). Once you know these two numbers, everything else follows.
Free Guide to Pay by Plate Illinois Billing →
Here's a concrete example: imagine you're building stairs from a basement floor to a main floor, and the vertical distance is 96 inches (8 feet). Building codes in most areas allow risers between 7 and 8 inches tall. If you divide 96 inches by 8 inches per riser, you get 12 steps. That means you need 13 stringers (one more than the number of steps) because the bottom of the staircase sits on the floor and the top lands on the upper floor.
Once you know the number of steps, you can calculate the actual riser height. Using the same example: 96 inches divided by 13 steps equals about 7.4 inches per riser. That's within code limits, so this staircase will work. If your math put risers at 9 inches—above the typical 8-inch maximum—you'd need to recalculate with more steps and a shorter rise per step.
The run calculation follows a similar pattern. Building codes typically require a minimum tread depth of 10 inches. If you're building 12 steps with a 10-inch minimum run per step, your staircase will extend at least 120 inches (10 feet) horizontally. This is crucial information before you start building, because a staircase that's too steep or extends too far might not fit your space.
The guide includes worksheets and examples that let you plug in your specific measurements. It also explains common mistakes: forgetting to account for the thickness of the top landing, miscalculating the width of the stringers themselves, or misunderstanding how the first step differs from the others. These are details that sound small but can throw off your entire layout if you miss them.
Practical takeaway: Write down your total rise and total run measurements three times to confirm accuracy. A single measurement error compounds throughout your entire staircase, so this step matters more than rushing through the cutting process later.
A framing square (also called a carpenter's square) is the essential tool for marking stringers. It's an L-shaped metal ruler with a longer blade (24 inches) and a shorter tongue (16 inches), and it works like a built-in calculator for stair geometry. Once you understand how to use it, you can mark precise step outlines without doing math in your head.
Free Guide to Mold Removal Methods for Walls →
The process relies on the square's inch markings. You position the square so that one measurement on the blade aligns with your calculated run, while the matching measurement on the tongue aligns with your calculated rise. As an example, if each step has a 7.5-inch rise and a 10.5-inch run, you place the square on your stringer lumber so that the 7.5-inch mark on the tongue and the 10.5-inch mark on the blade both touch the edge of the board. Then you draw a line along both edges of the square—that line represents one step.
You repeat this process, moving the square down the board, until you've marked all the steps. This method is faster and more accurate than trying to measure and mark each step individually. Professional carpenters use this technique because it reduces the chance of cumulative errors where small mistakes add up across multiple steps.
The guide walks through the physical steps: positioning the stringer lumber, holding the square steady, marking the cuts, and accounting for the fact that the first and last steps are often slightly different from the middle steps. It also explains the cut-off method (where the stringers themselves get trimmed at the bottom and top) versus the notching method (where you cut notches for each step to sit on).
One detail that trips up beginners: the thickness of the treads. If you're using 1.5-inch-thick lumber for treads, that thickness reduces the effective rise of the last step, and the guide explains how to adjust your markings accordingly. Similarly, if the landing height differs from your calculated rise, you need to know how to compensate when you mark the stringers.
Practical takeaway: Practice marking a test board with scrap lumber before you mark your actual stringer. This gives you a chance to check your setup, confirm the square sits correctly, and verify that your step sizes look right before you make permanent cuts.
Not all stringers are built the same way, and the type you choose depends on your situation, the look you want, and how the staircase needs to function. The three main types—open, closed, and housed—serve different purposes and have different structural and visual properties.
How to Delete Your Fitbit Account Guide →
Open stringers have the stepped profile cut out and visible from the side. When you look at the stairs, you can see the outline of each step against the stringers; the stringers themselves are exposed. This style is common in modern homes and decks because it looks clean and visually light. Open stringers are also faster to build because you're cutting away material rather than adding it. However, they provide less support for very wide staircases and can feel less sturdy than other options, even if they're built to code.
Closed stringers have solid sides with notches cut only deep enough to support the treads and risers. The stringer profile remains mostly solid, giving the staircase a more enclosed, finished appearance. These are standard in older homes and in basements where you want the staircase to look more substantial. Closed stringers support weight differently than open stringers, distributing forces across a larger surface area.
Housed stringers go a step further: instead of notches, the treads and risers fit into routed grooves (or "housed" channels) cut into the inside edge of the stringers. This method creates an extremely strong staircase that can handle heavy use and wide spans. Housed stringers are more complex to build because routing these grooves requires precision equipment and careful calculation, but they're common in commercial buildings and high-traffic residential stairs.
The guide explains how to decide which type fits your project. A basement staircase where you want a sturdy, finished look? Closed stringers. A modern deck or open concept space? Open stringers.
This guide is for general information only and is not medical, financial, legal, or other professional advice. For decisions specific to your situation, consult a qualified professional. See our Editorial Policy.