Ring devices—including video doorbells, security cameras, and alarm systems—sometimes need to be reset to their factory settings. This happens for several reasons: you've forgotten your password, you're selling the device to someone else, you're moving it to a new location, or it's not connecting to your Wi-Fi network properly. A reset wipes all personalized settings and returns the device to how it was when it left the factory.
Learn About Paying Your FGUA Bill Online →
Understanding what a reset actually does is crucial before you perform one. When you reset a Ring device, you're erasing your account connection, Wi-Fi settings, custom motion zones (if you set them up), and any personalized alerts you configured. The physical device itself remains unchanged—it's not damaged or broken. Think of it like returning a phone to factory settings: the hardware is intact, but the software goes back to square one.
Not every issue requires a reset. If your Ring doorbell isn't recording videos, for example, the problem might be your Wi-Fi connection, your Ring subscription status, or a temporary software glitch. If your camera keeps disconnecting from the internet, a simple power cycle (unplugging it for 30 seconds and plugging it back in) often solves the problem without erasing your settings. However, if these basic troubleshooting steps don't work, a factory reset becomes a reasonable next step.
The timing of a reset matters too. If you're troubleshooting an issue, document your settings first. Take screenshots of your motion detection zones, notification preferences, and any other custom configurations. This way, after the reset, you'll know exactly what to set up again rather than scrambling to remember how you had things arranged.
Takeaway: A reset returns your Ring device to factory settings and clears all your personal configurations, making it useful for troubleshooting persistent problems or preparing a device for a new owner. Know what a reset does before you perform one so you're not surprised by the changes.
Every Ring device has a physical reset button or reset mechanism, but its location varies depending on your specific model. The reset button is usually small, recessed, and requires a tool to press—this design prevents accidental resets. Ring does this intentionally so you won't reset your device by bumping it or touching it casually.
Free Guide to Pay by Plate Illinois Billing →
For Ring Video Doorbells (most models, including the 2nd and 3rd generation), the reset button is located on the lower right side of the device, on the face that points outward. You'll need a straightened paperclip or a small tool to access it. The button sits in a small hole about the size of a ballpoint pen tip. On Ring Stick Up Cam models, the reset button is typically on the back or bottom of the camera body, also in a recessed hole.
Ring Floodlight Cam and Ring Spotlight Cam devices have their reset buttons in slightly different spots depending on the generation. Generally, you'll find it on the back or underside of the device. Ring Indoor Cam (the small, cube-shaped camera) has a reset button on the bottom. Ring Alarm system components vary—the main keypad usually has a reset option in the settings menu rather than a physical button, while other sensors have physical reset buttons in specific locations.
Before you start looking for the reset button, consult the documentation that came with your device or visit Ring's support website to confirm your specific model number and button location. Taking a photo of your device's model and serial number (usually found on a sticker) helps tremendously if you need to reference instructions later. This small step prevents frustration and ensures you're pressing the right button.
Takeaway: Ring device reset buttons are intentionally hidden in small holes to prevent accidental use. Know your device's specific model before searching for the button, and use a straightened paperclip or similar thin tool to access it.
The basic reset process is similar across most Ring devices, though timing varies slightly. The general procedure involves locating the reset button, holding it down for a specific duration, and waiting for visual confirmation that the reset is complete. During the reset process, your device will go through a startup sequence, and you'll see lights flash or hear sounds indicating the reset is working.
Free Guide to Mold Removal Methods for Walls →
For most Ring Video Doorbells, here's what the process looks like: First, locate the reset button using a paperclip or small tool. Press and hold the button for about 15 seconds. You should see the ring light on the front of the device begin to cycle through colors (typically going from one color to another). Keep holding the button even after the light starts changing—this is normal. After approximately 15 seconds, release the button and wait. The device will then restart, and the light will eventually turn solid, indicating the reset is complete. This entire process usually takes 2 to 3 minutes from start to finish.
Ring Stick Up Cam and Ring Indoor Cam models sometimes use a slightly different timing. Hold the reset button for 20 seconds instead of 15. You'll notice the light on the camera blink or change color during this period. Once you release the button, wait for the light to stabilize—this means the reset was successful. The device will then be ready to set up again from scratch, which means reconnecting it to Wi-Fi and adding it back to your Ring account.
For Ring Alarm systems, the process is different because the main hub is the core component. On most Ring Alarm hubs, you'll perform a reset through the Ring app or by using the physical reset button on the back of the hub (holding it for 15 seconds). Ring Alarm contact sensors and motion detectors each have their own small reset buttons. Consult your specific alarm documentation because reset procedures can vary between first-generation and second-generation Ring Alarm systems.
Takeaway: Most Ring devices reset by holding the physical button for 15-20 seconds while watching for light changes that indicate the process is working. Patience is key—don't rush the process, and always wait for the light to stabilize before assuming the reset is complete.
Once your Ring device completes the reset process, it's essentially a blank slate. Your device no longer recognizes any Wi-Fi networks you previously connected it to, and it no longer knows about your Ring account. If you were sharing access to that device with family members or friends, those connections are erased. Any custom motion detection settings, recording schedules, or notification preferences you configured are gone. This is why documentation before the reset matters.
How to Delete Your Fitbit Account Guide →
The next step is setting up the device again as if it's brand new. You'll open the Ring app on your phone, look for the option to set up a new device, and follow the on-screen instructions. The app will guide you through connecting the device to your Wi-Fi network—this is where patience helps because some devices take longer to connect than others. During setup, you'll verify your Ring account, choose whether this device should be added to an existing Ring account or a new one, and then configure any additional settings like naming the device, setting up motion detection zones, or adjusting notification preferences.
If you're resetting a device because you're giving it to someone else, stop at the connection step. Don't add it to your Ring account again. Instead, inform the new owner that the device is reset and ready for setup. They should set it up with their own Ring account using their own credentials. This protects your privacy and ensures they have full control over the device going forward. If you're resetting because of technical issues, setting it up again on your own account gives you a chance to start fresh and often resolves connectivity or performance problems.
Some people reset their Ring devices, then immediately notice the same problem reoccurs during setup. This suggests the issue isn't with the device's settings but rather with something else—your Wi-Fi router, your internet service provider's connection stability, or account-level settings. In these cases, the reset helped diagnose the root cause rather than solve it, which is valuable information for troubleshooting.
Takeaway: After reset, your device is completely unconfigured. You'll need to set it up again from scratch in the Ring app, choosing whether to add it to your account or prepare it for a new owner. If the same problem happens again during setup, the issue likely lies elsewhere.
This guide is for general information only and is not medical, financial, legal, or other professional advice. For decisions specific to your situation, consult a qualified professional. See our Editorial Policy.