Raycon earbuds have become a popular choice for people looking for wireless audio without spending hundreds of dollars. The brand offers several models across different price points, from their entry-level options around $50 to premium versions exceeding $150. Each model uses Bluetooth technology to connect to phones, tablets, and computers, but the specific pairing steps can vary depending on which Raycon model you own.
Learn About Paying Your FGUA Bill Online →
The pairing process—connecting your earbuds to a device for the first time—is where many people encounter confusion. Unlike wired earbuds that work immediately, Bluetooth earbuds require a one-time setup. This guide walks through the connection process so you know exactly what to expect when you unbox your Raycons.
Most Raycon models follow similar pairing principles, though details differ. The E25 model, one of their bestsellers with over 500,000 units sold, uses a slightly different button configuration than their newer E50 or E70 Pro models. Understanding the fundamental concepts behind Bluetooth pairing helps troubleshoot issues if they arise.
Key concepts to know: "Pairing" is the first-time connection between earbuds and a device. "Connecting" is when paired earbuds automatically link to that device again. "Bluetooth mode" is when your earbuds are in discovery mode, waiting to pair with a new device. These distinctions matter when following connection steps.
Practical takeaway: Before starting any pairing process, charge your Raycon earbuds for at least 15 minutes. Most connection failures happen with low-battery earbuds, since they don't have enough power to maintain the Bluetooth signal during setup.
The Raycon E25 represents one of the most widely owned models, making it a good reference point for understanding the brand's connection approach. To pair E25 earbuds with your device, start by ensuring both earbuds are in their charging case. Remove both earbuds simultaneously and hold the button on the back of each earbud for about 15 seconds. You'll see the LED lights flash red and blue, indicating they're in pairing mode.
Free Guide to Pay by Plate Illinois Billing →
Once the earbuds are in pairing mode, open your device's Bluetooth settings. On iPhones, this means going to Settings > Bluetooth. On Android phones, navigate to Settings > Connected devices > Bluetooth (exact locations vary by Android version). Your phone will display available Bluetooth devices. Look for "Raycon E25" in the list and tap it. The phone will pair automatically, and you should see a confirmation message within 10-15 seconds.
For Raycon's newer E50 model, the process is similar but with one key difference: the E50 earbuds have a touch control interface rather than physical buttons. To enter pairing mode with E50s, remove both earbuds from the case and hold your finger on the touch surface of each earbud for about 3 seconds. The LED indicator will flash blue, showing they're ready to pair. From there, the phone-side steps remain identical—find them in your Bluetooth settings and tap to pair.
The E70 Pro and E100 models, Raycon's premium lines, include touch controls and slightly different LED indicator patterns. Red and white flashing lights indicate pairing mode on these models. The connection process from your phone's perspective doesn't change, but understanding the LED signals helps confirm each step is working.
Some Raycon models include a companion app that can be found in the Apple App Store or Google Play Store under "Raycon." While the earbuds pair through standard Bluetooth, the app provides additional features like firmware updates and customizable EQ settings. The app is optional for basic pairing but recommended for accessing these extra features.
Practical takeaway: Write down which Raycon model you own before starting. The model number appears on your receipt, the charging case, or Raycon's website in your account. Having this information prevents confusion if steps differ from what you're experiencing.
Even with correct steps, connection issues occur. The most common problem is earbuds not appearing in your device's Bluetooth list at all. When this happens, first check that your earbuds have enough battery. If the LED lights aren't flashing during attempted pairing, the battery is likely too low. Return them to the charging case for 20-30 minutes and try again.
Free Guide to Mold Removal Methods for Walls →
A second frequent issue involves earbuds that paired before suddenly failing to reconnect. This often happens when multiple devices have previously paired with the same earbuds. Raycon earbuds typically remember the last 5-8 paired devices. If you've paired them with many phones or computers, the memory may be full. To fix this, perform a factory reset: place both earbuds in the charging case, close the case, then press and hold the reset button (usually on the back of the case or under a small flap) for 10-15 seconds. The LED lights should flash in a specific pattern, indicating the reset worked. After resetting, you'll need to pair the earbuds with your device again from scratch.
Connection dropping shortly after pairing represents another common frustration. This typically indicates interference from other wireless devices. Bluetooth operates on the 2.4 GHz frequency, which is crowded. WiFi routers, microwaves, and some wireless mice all use this same frequency. If your earbuds keep disconnecting, move away from these devices or turn them off temporarily to identify if they're the source. You can also try "forgetting" the earbuds from your device and re-pairing. On iPhones, go to Settings > Bluetooth, find the Raycon earbuds, tap the info icon, and select "Forget This Device." On Android, go to Settings > Connected devices > Bluetooth, press and hold the Raycon earbuds, and select "Unpair."
If one earbud connects but the other doesn't, remove the working earbud from your ear and return it to the charging case. Then remove the non-working earbud and hold it in pairing mode for 15-20 seconds (longer than the standard 3-15 seconds). This extended hold sometimes resolves connection issues with individual earbuds. If this doesn't work, a factory reset of both earbuds may be necessary.
Practical takeaway: Keep your device's Bluetooth on and within 30 feet of your earbuds during initial setup. Bluetooth range is typically 30-33 feet in open space, but walls and interference reduce this significantly. Once paired, most Raycon models maintain connection from 20-25 feet away.
One advantage of Raycon earbuds is that they can pair with multiple devices—useful if you use both a phone and a computer. However, the connection process differs slightly when adding a second device to already-paired earbuds.
How to Delete Your Fitbit Account Guide →
If your Raycon earbuds are already paired with your iPhone and you want to add a MacBook, don't perform a factory reset. Instead, make sure your earbuds are disconnected from your iPhone (this can be done by going to your iPhone's Bluetooth settings and selecting "Disconnect," or simply turning off Bluetooth on the iPhone). Then, on your MacBook, go to System Preferences > Bluetooth and scan for available devices. Your Raycons should appear in the list. Click to pair. The MacBook will now be added to the earbuds' device memory without erasing the iPhone pairing.
Once multiple devices are paired, the earbuds will usually connect to whichever paired device is closest or most recently used. This is automatic and requires no manual switching in most cases. However, if you want to force a connection to a specific device, manually connect through that device's Bluetooth settings. When you do this, the earbuds will disconnect from any other device.
Some Raycon models, particularly the E70 Pro and higher-end options, support a feature called "dual connection" or "multipoint pairing," where the earbuds remain connected to two devices simultaneously. This means calls or audio from either device can play through the earbuds without manually switching. Check your specific model's documentation or the Raycon app to see if this feature is available.
To remove a device from your
This guide is for general information only and is not medical, financial, legal, or other professional advice. For decisions specific to your situation, consult a qualified professional. See our Editorial Policy.