Get Your Free Printer Spooler Reset Guide

Understanding Printer Spooler and Why It Gets Stuck

The printer spooler is a program that runs in the background on your computer and manages all the documents you send to print. When you click "print" on a document, the spooler receives that job and holds it in a queue until your printer is ready to process it. Think of it like a waiting room at a doctor's office — patients (print jobs) arrive and wait their turn before being seen (printed) by the printer.

Free Guide to Changing Your Facebook Profile Picture →

Sometimes the spooler gets confused or stuck. This happens when print jobs get corrupted, when there's a communication problem between your computer and printer, or when too many documents pile up in the queue without being processed. When the spooler stops working correctly, you might notice that print jobs never reach your printer, or your printer seems to ignore commands even though the documents appear to be sent.

According to Microsoft support documentation, spooler problems affect computers running Windows operating systems across various versions. The issue is common enough that Microsoft includes spooler troubleshooting in their official support resources. Common signs include: print jobs remaining stuck in the queue for hours, error messages appearing when you try to print, the printer being listed as "offline" even when it's turned on and connected, or the print queue showing jobs from days ago that never printed.

The spooler service can become stuck due to several reasons. A document with corrupted data can cause the entire queue to freeze. Network interruptions between your computer and printer can leave jobs abandoned in the queue. Software conflicts, especially after installing new printer drivers or updates, can prevent the spooler from communicating properly. Power outages or computer crashes can leave the spooler in an incomplete state.

Practical Takeaway: Understanding that the spooler is simply a holding area for print jobs helps you recognize that fixing it won't delete your actual documents — it only clears the stuck requests to print.

Step-by-Step Process for Resetting Your Spooler on Windows

Resetting the printer spooler on a Windows computer involves stopping the spooler service, clearing its files, and restarting the service. This process removes all stuck print jobs and allows the spooler to start fresh. The process works the same way for most Windows versions, including Windows 10 and Windows 11, though button locations and names may vary slightly.

Get Your Free Guide to IRS Contact Options →

The first step is to open the Services application on your computer. On Windows, you can do this by pressing the Windows key and R together, which opens the "Run" dialog box. Type "services.msc" (without quotes) and press Enter. This opens a window showing all the services running on your computer. Look for an entry called "Print Spooler" in the list. The list is alphabetical, so it will appear in the P section.

Once you locate the Print Spooler service, right-click on it to bring up a menu. Select "Stop" from the menu. Windows will disable the service and stop it from running. You might see a loading circle briefly while Windows stops the service. This step is essential because you cannot delete the spooler files while the service is still running — the files will be locked and protected by Windows.

After stopping the spooler service, you need to navigate to the folder where spooler files are stored. Open File Explorer (also called Windows Explorer) on your computer. Navigate to this folder path: C:\Windows\System32\spool\PRINTERS. If you haven't hidden system files before, you may need to show hidden files first. In File Explorer, click the "View" menu at the top, then look for an option called "Hidden items" or "Show hidden files" and check that box.

Inside the PRINTERS folder, you will see files that represent stuck print jobs. Select all files in this folder by pressing Ctrl+A, then delete them by pressing the Delete key. Windows may ask if you want to delete these items — confirm that you do. These files are temporary and safe to delete; they represent only the stuck print requests, not your actual documents.

The final step is to restart the Print Spooler service. Return to the Services window you opened earlier. Right-click on "Print Spooler" again and select "Start." Windows will restart the spooler service, and it will be ready to handle new print jobs. You should see the status change to "Running."

Practical Takeaway: Write down these folder path and steps before you start, so you have them available in case you need to reference them while working through the process.

Resetting the Spooler on Mac Computers

Mac computers use a different operating system and handle printing differently than Windows. However, Mac computers also have a print queue system that can get stuck. On a Mac, the process for resetting the print queue is simpler and doesn't require navigating to system folders or stopping services manually.

Free Guide to Understanding Mac Operating Systems →

The easiest way to clear the print queue on a Mac is through the System Preferences (or System Settings on newer Macs). Open System Preferences by clicking the Apple menu in the top-left corner of your screen, then select "System Preferences" or "System Settings." Look for the "Printers & Scanners" option and click it. This shows all printers connected to your Mac.

In the Printers & Scanners window, select your printer from the list on the left side. Once selected, you should see a button labeled "Open Print Queue" or you might see a link that says "Open Printer Utility." Click this option. A new window will appear showing all print jobs currently in the queue for that printer. Select any jobs you see listed and click the minus button or delete option to remove them from the queue.

If the print queue window doesn't appear or if stuck jobs remain after this process, you can use Mac's command line tool called Terminal to reset the queue more thoroughly. Open Terminal (found in Applications > Utilities > Terminal). Type the command: "cancel -a" (without quotes) and press Enter. This command cancels all print jobs for your user account. You may need to type your Mac password to complete this action.

For a more complete reset similar to Windows, you can reset the entire printing system on a Mac. This is a more advanced step and should only be used if the above methods don't work. In System Preferences, right-click on your printer in the list and select "Reset printing system" (the exact wording may vary). This removes all printers from your Mac and clears all print queues. You'll need to add your printer back afterward by going to Printers & Scanners and clicking the plus button to add your printer again.

Practical Takeaway: Mac users should try the simple print queue clearing method first before attempting a complete system reset, as most stuck print jobs clear this way.

Troubleshooting Steps If the Spooler Reset Doesn't Work

Sometimes resetting the spooler alone doesn't solve the problem. If you've cleared the spooler but still can't print, additional troubleshooting steps can identify the root cause. Start by checking whether the printer itself is working correctly. Make sure your printer is turned on, has paper in the tray, and isn't displaying any error messages on its own screen. Check that ink or toner cartridges have ink remaining and aren't low enough to trigger a "replace cartridge" warning.

Get Your Free Laptop Buying Guide for Seniors →

Next, verify that your printer is properly connected to your computer. If you use a USB cable, try unplugging it from both the printer and the computer, waiting 30 seconds, and plugging it back in firmly. If your printer connects through your network (Wi-Fi), check that it's connected to the same network as your computer. You can usually see the network name and signal strength on the printer's display screen. Restart your printer by turning it off, waiting one minute, and turning it back on. Restarting often clears temporary problems.

Check your printer drivers, which are software that allow your computer to communicate with your printer. Outdated or corrupted drivers frequently cause printing problems. To check your drivers on Windows, open Device Manager by pressing the Windows key and R, typing "devmgmt.msc," and pressing Enter. Look for "Print queues" or your specific printer model in the list. If you see a yellow warning symbol next to your printer, this indicates a driver problem. Visit your printer manufacturer's website (like HP, Canon, Brother, or Epson) and search for the latest driver for your specific printer model. Follow their instructions to download