Get Your Free iPhone 13 Water Resistance Guide

Understanding iPhone 13 Water Resistance Ratings

The iPhone 13 comes with an IP68 water resistance rating, which is an international standard that measures how well a device can withstand exposure to liquids and dust. Understanding what this rating actually means is the first step toward protecting your investment. IP68 breaks down into two parts: the "IP" stands for "Ingress Protection," the "6" refers to dust resistance, and the "8" indicates water resistance. The "6" rating means the device is completely protected against dust ingestion. The "8" is where water protection comes in—it means the iPhone 13 can withstand being submerged in water up to 6 meters deep for approximately 30 minutes under controlled laboratory conditions.

Get Your Free Whirlpool Refrigerator Owner's Guide →

Apple's official specifications state that the iPhone 13 can resist water exposure from activities like swimming and snorkeling, but not from water sports like surfing or diving where the phone might experience water pressure beyond the tested parameters. The rating was tested using fresh water and salt water, so your iPhone 13 should theoretically handle both pool water and ocean water. However, it's important to note that this is the manufacturer's baseline rating—actual performance in real-world situations may vary based on factors like the phone's age, any prior damage to seals, and the specific conditions it encounters.

One common misconception is that water resistance and waterproofing are the same thing. They are not. Water resistance means the device can tolerate some water exposure, but waterproofing would mean complete protection under all water conditions indefinitely. The iPhone 13 is water-resistant, not waterproof. This distinction matters because it means you shouldn't intentionally submerge your phone or expose it to water regularly, even though it has this protection built in.

Practical Takeaway: The iPhone 13's IP68 rating provides protection against accidental water exposure and submersion up to 6 meters for 30 minutes. Know the limits of this protection so you can make informed decisions about when it's safe to use your phone near water.

Real-World Water Exposure Scenarios and How Your iPhone 13 Handles Them

Your iPhone 13 can handle numerous everyday water situations that would have damaged earlier smartphone models. If you're caught in heavy rain while walking or running, your phone will survive. Rain exposure is one of the most common water scenarios people face, and the IP68 rating provides solid protection here. If you accidentally drop your phone into a toilet, sink, or bathtub, you have a 30-minute window to retrieve it before water can potentially cause damage, as long as it's not deeper than 6 meters—which is unlikely in a home setting. Spills from drinks, coffee, or water bottles landing on your phone should not cause immediate problems, though you should still dry it off promptly.

Learn How Credit Card Autofill Works →

Swimming is another scenario where the iPhone 13's water resistance shines. You can take your phone into a swimming pool and even use it to take underwater photos or videos. The water resistance holds up well in fresh pool water. Snorkeling situations are also within the phone's capability, as you might hold it near the water's surface. However, diving deeper than 6 meters or participating in water sports like surfing, where your phone might experience forceful water impact or prolonged submersion in rough conditions, exceeds the tested parameters and creates risk.

Saltwater exposure presents a special consideration. While the iPhone 13 was tested for salt water resistance, salt can be more corrosive than fresh water over time. If your phone gets salt water on it—whether from ocean spray, a beach visit, or a drop into the ocean—you should rinse it with fresh water afterward. Many users report that their iPhones have survived accidental ocean submersion, but salt residue left on the device can potentially cause issues with ports and speakers over an extended period if not cleaned.

Humidity and condensation scenarios also matter. If you bring a cold iPhone 13 into a hot, humid environment like a bathroom during a shower, water can condense on the exterior and potentially find its way into ports or speaker openings. While the device is designed to handle this to some degree, it's still wise to avoid prolonged exposure to steam-filled environments.

Practical Takeaway: Your iPhone 13 handles rain, spills, accidental drops in water, and swimming well. After salt water exposure, rinse your phone with fresh water. Avoid intentional deep diving, high-impact water sports, and prolonged steam exposure to maintain the integrity of the water resistance seals.

How Water Resistance Degrades Over Time and What Causes It

Water resistance is not a permanent feature that stays at 100% throughout your iPhone 13's lifespan. The seals and gaskets that create the water-resistant barrier are made of materials like silicone and rubber that naturally degrade over time. Apple doesn't publicly specify exactly how long these seals remain effective, but industry experts estimate that water resistance can diminish noticeably after 12 to 24 months of regular use. This degradation happens because these materials harden, crack, or become compressed from the constant opening and closing of ports and from exposure to temperature changes.

Get Your Free Oil Change Price Comparison Guide →

Physical damage to your iPhone 13 accelerates water resistance degradation significantly. If you drop your phone and the screen cracks, the integrity of the sealed enclosure is compromised. Liquid can seep through fine cracks in glass, even ones you might not think are large enough to allow water through. Similarly, if the frame bends from impact, it can create gaps in the seal. Any repair that wasn't performed by Apple or an authorized repair shop might also compromise the water resistance, since the technician may not have properly resealed all the necessary areas using the correct materials and techniques.

Regular use in harsh environments speeds up degradation. If you frequently expose your iPhone 13 to extreme temperature changes—like taking it from a cold outdoor environment directly into a warm building—the materials expand and contract, which can weaken seals. Chlorine in swimming pools, while your phone is tested against it to some degree, can still contribute to seal degradation over time. Sand and dust can also get lodged in ports and around seals, creating tiny pathways for water to eventually penetrate.

Port usage matters too. Every time you plug something into your charging port or connect headphones (if using an adapter), you're inserting something into a sealed area. Over hundreds of insertions, the gasket around that port becomes less effective. This is why some iPhone 13 users notice reduced water resistance after a year or two of heavy charging—the repeated port insertion has gradually worn down the seal.

Practical Takeaway: Water resistance naturally weakens over time as seals degrade. Avoid dropping your phone, keep it away from extreme temperature swings, minimize port usage when possible, and consider that your iPhone 13's water resistance may be significantly less effective after 18-24 months than it was brand new.

Steps to Take If Your iPhone 13 Gets Wet

If your iPhone 13 comes into contact with water, the steps you take in the first few minutes and hours are crucial. First, remove the phone from the water immediately and power it off. Do not attempt to charge it or connect it to a computer right away. Let any visible water drip off naturally or gently pat it dry with a soft, lint-free cloth. Do not use paper towels, as they can leave fibers inside ports. If water is visibly present in the speaker grills or charging port, you can hold the phone at a slight angle and let gravity help drain it, or gently tap the phone against the palm of your hand to encourage water to exit the openings.

Understanding Medicare Coverage for Assisted Living →

Leave the phone powered off for at least 24 to 48 hours. This waiting period allows any internal moisture to evaporate naturally. During this time, keep the phone in a warm, dry location—not in direct sunlight, but in a room with good air circulation and moderate temperature. Some people place their wet phones in a bowl of uncooked rice, which can help absorb moisture from the air around the device, though research on this method's effectiveness is mixed. A better option is to place the phone in a container with silica gel packets if you have them available, as these are designed specifically to absorb moisture.

Avoid the temptation to use heat to dry your phone faster. Do not use a hair dryer, oven, or heating pad. Direct heat can damage the battery and internal components. Similarly, do not use compressed air in an attempt to blow water out of ports, as the pressure can actually force water deeper into the device