Get Your Free Honda TPMS Sensor Reset Guide

Understanding TPMS Sensors and Why They Matter

TPMS stands for Tire Pressure Monitoring System. This is a safety feature built into Honda vehicles that watches the air pressure inside your tires while you drive. Each tire has a small electronic sensor attached to the valve stem or wheel. These sensors transmit tire pressure data to your vehicle's computer system constantly.

Get Your Free Warren Dental Implants Information Guide →

The TPMS warning light—usually shaped like an exclamation point inside a tire—appears on your dashboard when one or more tires drop below the recommended pressure level. According to the National Highway Traffic Safety Administration (NHTSA), properly inflated tires improve fuel economy by up to 3 percent and reduce tire wear. Underinflated tires can overheat, leading to blowouts and loss of vehicle control.

Honda vehicles have been required to include TPMS since 2008, when federal regulations took effect. The system monitors tire pressure in real time and sends alerts when pressure drops approximately 25 percent below the vehicle manufacturer's recommended PSI (pounds per square inch). This early warning gives drivers time to inflate their tires before a dangerous situation develops.

There are two main types of TPMS sensors: direct and indirect. Direct TPMS uses sensors mounted inside each wheel that measure actual tire pressure. Indirect TPMS uses wheel speed sensors from your anti-lock brake system to detect pressure loss by identifying when a tire rolls differently due to lower pressure. Most Honda vehicles use direct TPMS sensors.

Practical Takeaway: Understanding how your TPMS works helps you respond correctly when the warning light appears. Rather than ignoring the alert or assuming it is a malfunction, you now know the system is doing its job—protecting you by flagging tire pressure problems before they become dangerous.

When Your TPMS Sensor Needs a Reset

A TPMS reset becomes necessary in several common situations. The most frequent reason occurs after you manually inflate your tires. When you add air to one or more tires at a gas station or with a home compressor, the sensor readings change. Your Honda's computer may need to recalibrate to recognize the new, correct pressure levels. Without resetting, the warning light may stay on even though your tires are now properly inflated.

Learn About Your Local Court System →

Seasonal temperature changes also trigger the need for resets. Tire pressure naturally decreases in cold weather—for every 10-degree Fahrenheit drop in temperature, tire pressure can fall by 1 PSI. During winter months, many Honda drivers see their TPMS light come on simply because temperatures dropped overnight. After you check and adjust tire pressure for the season, a reset tells the system to recognize these new baseline readings.

Another common scenario involves tire rotation. When you rotate your tires from front to rear or side to side, the sensors move locations. Your vehicle's computer needs to relearn which sensors belong in which wheel positions. Without this relearning process, the system may send false pressure warnings.

Spare tire installation is another reset trigger. If you install a spare tire due to a flat, the TPMS system may detect an unfamiliar sensor or no sensor at all, depending on whether your spare includes a sensor. After you return to your regular tire setup, a reset helps the system readjust.

Additionally, if you replace one or more tires with new ones, the new sensors need to be relearned by your vehicle's computer. Battery replacement in a TPMS sensor also requires a reset so the system recognizes the newly powered sensor.

Practical Takeaway: Most TPMS resets are straightforward maintenance tasks you can handle yourself. Knowing which situations require a reset prevents unnecessary trips to a mechanic and helps you maintain proper tire pressure monitoring year-round.

Step-by-Step TPMS Reset Procedures for Honda Vehicles

The reset procedure varies slightly depending on your Honda model year and generation, but most newer Honda vehicles follow similar steps. Begin by ensuring all four tires are inflated to the pressure specified on the driver's door jamb placard—not the maximum pressure listed on the tire itself. The door jamb placard shows Honda's recommended PSI for your specific vehicle and driving conditions.

Free Guide to Understanding WIOA Program Options →

For many Honda models from 2008 to present, the basic reset procedure involves turning on the ignition without starting the engine. Press the small reset button, usually located beneath the steering wheel or on the instrument panel. You may need to hold this button for several seconds until the TPMS light blinks or changes color. Some models require you to turn the ignition off, then back on, to complete the reset. The warning light should turn off within one minute if the reset was successful.

For Honda models with steering wheel controls, you may access the TPMS menu through your dashboard display. Using the navigation buttons on your steering wheel, scroll through the main menu until you find a Tire Pressure or TPMS option. Select this menu item, then choose "Reset" or "Calibrate." Confirm your selection, and the system will recalibrate the sensor readings.

Some newer Honda models with touchscreen displays require you to access the settings menu through the infotainment system. Navigate to Vehicle Settings or System Settings, find the Tire Pressure Monitoring option, and select Reset or Recalibrate. The exact menu path differs by model, but this process typically takes less than two minutes.

After completing the reset, drive your Honda at highway speeds for several minutes. The sensors need to transmit updated pressure readings to the vehicle's computer while the car is in motion. After 10 to 15 minutes of driving, the system should fully recognize all sensors and confirm the reset was successful. If the light remains on after driving, consult your owner's manual for your specific model's procedures, as some vehicles have unique reset requirements.

Practical Takeaway: Having your vehicle's manual nearby makes the reset process straightforward. Most resets take fewer than five minutes and require no tools or technical knowledge—just knowing the correct button or menu option for your specific Honda generation.

Tools and Resources You May Need

Resetting your TPMS sensor requires minimal equipment. Most importantly, you need an accurate tire pressure gauge. Digital gauges, available at auto parts stores for $10 to $30, provide precise readings. Analog gauges with a dial face work but may be less accurate. Many gas station air pumps include built-in gauges, though these machines vary in accuracy. For the most reliable readings, invest in a personal digital gauge you can keep in your vehicle.

Free Guide to Pensions and Social Security →

You will also need an air compressor to inflate tires to the correct pressure. Portable 12-volt compressors that plug into your vehicle's power outlet cost between $25 and $60 and work well for occasional use. Floor pumps designed for home use are more durable if you plan to check tire pressure regularly. Gas station air pumps are free to use and convenient, though you may need to add coins at some locations. Many newer gas stations offer free air as a customer service.

Your Honda's owner's manual is an essential resource—it contains specific reset instructions for your vehicle generation and model year. If you have lost your physical manual, you can find digital versions online through Honda's official website or auto repair websites like RepairPal or YourMechanic. Simply search for your vehicle's year, make, and model followed by "owner's manual PDF." Most manufacturers offer free downloadable versions.

Honda dealerships provide TPMS reset information at no charge, either by phone or through their service departments. Many tire retailers and general automotive shops also perform TPMS resets, typically charging between $15 and $40 if you prefer professional assistance. However, the reset procedure itself requires no special equipment or dealer access—it is designed as a driver-initiated maintenance task.

Online videos from Honda's official YouTube channel and other automotive education channels demonstrate the reset process visually for various Honda models. These videos can clarify any confusion about button locations or menu navigation specific to your vehicle. Manufacturer forums and Honda owner communities also share experiences and troubleshooting tips for different model generations.

Practical Takeaway: You likely have most items you need already. A tire pressure gauge and air access are the only essential tools, both inexpensive or freely available. Your owner's manual provides everything you need to complete the reset without paying a mechanic.

Troubleshooting TPMS Reset Issues

Sometimes the

Free Guide to Renewing Your Georgia Esthetician License →