Get Your Free Ford Warranty Coverage Information Guide

Understanding Ford Factory Warranty Coverage Basics

Ford vehicles come with factory warranty protection from the manufacturer. This guide provides information about what those warranties typically cover and how they work. The factory warranty is different from extended warranties or service plans you might purchase separately.

Get Your Free Pomegranate Juice Making Guide →

A Ford factory warranty is the manufacturer's promise to repair or replace certain parts if they fail under normal use during a specific time period. Most new Ford vehicles include a basic warranty that covers defects in materials and workmanship. This warranty applies to nearly all components of the vehicle except for items that wear out through normal use, like brake pads, wiper blades, and tires.

Factory warranties typically have two main components: a time limit and a mileage limit. Whichever comes first determines when coverage ends. For example, if your warranty covers three years or 36,000 miles, your coverage stops when you reach either the three-year mark or drive 36,000 miles. Different warranty types may have different limits.

The guide covers information about what is and is not covered under standard Ford factory warranty protection. It explains the difference between wear items (parts that are expected to wear out) and defects (unexpected failures of parts that should last longer). Understanding this distinction helps vehicle owners know when they might need to pay for repairs versus when warranty coverage may apply.

Practical Takeaway: Review your vehicle's warranty documents that came with your purchase to locate the specific coverage limits and exclusions for your model year. Keep these documents in an accessible location, as you'll need them when visiting a Ford dealership for warranty service.

What Ford Warranty Coverage Typically Includes

Ford's factory warranty covers a broad range of vehicle systems and components. The guide provides information about which parts and systems are protected under standard coverage. This information helps owners understand what repairs or replacements the manufacturer may cover at no cost.

How Much Does Passport Replacement Cost →

Factory warranty coverage generally includes the engine, transmission, drivetrain, electrical system, fuel system, cooling system, and emission control systems. If components within these systems fail due to manufacturing defects, the warranty may cover repair or replacement. The guide explains how to identify whether a particular problem might fall under warranty coverage versus being a maintenance or wear item.

The warranty also covers defects in materials and workmanship found in the vehicle's body, frame, and interior components. This means if a door handle breaks, a window regulator stops working, or interior trim pieces fail unexpectedly, these situations may be covered during the warranty period. However, damage from accidents, misuse, or lack of maintenance is not covered.

Specific coverage details may include:

• Engine and transmission repairs due to manufacturing defects
• Electrical system components that fail unexpectedly
• Air conditioning and heating system repairs
• Steering and suspension system components
• Brake system components (except brake pads and rotors that wear normally)
• Window and door mechanisms
• Interior trim and panel components

The guide explains that warranty coverage is meant for unexpected failures, not for maintenance items. Regular maintenance like oil changes, air filter replacements, and tire rotations are owner responsibilities and are not covered by warranty.

Practical Takeaway: When a problem occurs with your vehicle during the warranty period, gather information about when the issue started and whether you've maintained the vehicle according to the owner's manual. This information helps when discussing the issue with a service advisor at a Ford dealership.

Warranty Exclusions and What Is Not Covered

Understanding what is not covered under Ford warranty protection is just as important as knowing what is covered. The guide provides information about common exclusions and limitations. This knowledge prevents owners from being surprised when they visit a service center expecting coverage that may not apply.

Your Free Guide to Finding BMW Certified Mechanics →

Wear items are the most common warranty exclusion. These are parts designed to wear out through normal use and must be replaced periodically. Brake pads, brake rotors (when worn from normal braking), wiper blades, windshield wipers, light bulbs, air filters, cabin air filters, and spark plugs are typically considered wear items. The cost to replace these items is the owner's responsibility, even during the warranty period.

The guide explains that damage caused by misuse, neglect, or accidents is not covered by factory warranty. If a vehicle is in an accident, warranty coverage does not apply to the damaged components. Similarly, if routine maintenance is not performed as recommended in the owner's manual, warranty coverage may not apply to failures that result from inadequate maintenance. For example, if engine damage occurs because oil changes were not performed regularly, the warranty may not cover that repair.

Other common exclusions include:

• Tires (typically covered only by tire manufacturer warranty)
• Batteries (may have separate battery warranty)
• Normal wear and tear on exterior paint and trim
• Damage from improper repairs or use of non-Ford parts
• Problems caused by modifications to the vehicle
• Interior wear such as seat wear or dashboard cracks from use
• Corrosion or rust from road salt or environmental exposure
• Fluid leaks in hoses and gaskets due to age (not defect)

The guide also covers regional corrosion limitations. In areas with significant road salt use, some components may have different warranty coverage than in other regions.

Practical Takeaway: Review the specific exclusions section of your warranty documents. If you live in an area with significant road salt or snow, pay special attention to corrosion-related exclusions and consider documenting regular washing and undercoating if you choose to have it performed.

How to Use Your Ford Warranty for Service and Repairs

The guide provides information about the process for obtaining warranty service. Understanding the correct steps ensures smooth service experiences and helps confirm that you receive the coverage to which you may be entitled.

Free Guide to Restoration Supplies and Materials →

When a problem occurs with your vehicle during the warranty period, the first step is to take your vehicle to an authorized Ford dealership service department. Dealerships are equipped with Ford-trained technicians and access to Ford's diagnostic systems. When you arrive at the service department, inform the service advisor about the issue and provide your vehicle's warranty information and purchase date.

The service advisor will create a work order documenting the problem you're describing. They will note your vehicle's current mileage and the warranty period. The technician will then diagnose the issue to determine whether the problem is covered under warranty or whether it falls into an exclusion category. Once the diagnosis is complete, the service advisor will discuss findings with you and explain whether warranty coverage applies.

If warranty coverage applies, you typically will not be charged for the repair or replacement. The dealership bills Ford directly for covered warranty work. If the issue is not covered under warranty, the service advisor will provide an estimate for the cost of the repair. You then have the option to proceed with the repair at your own expense or seek a second opinion at another location.

The guide explains the importance of keeping records of all service performed on your vehicle. Maintain receipts and documentation of:

• Warranty service performed during the coverage period
• Routine maintenance performed as recommended in the owner's manual
• Any repairs or modifications made to the vehicle
• The vehicle's mileage at each service visit

These records may be important if warranty coverage is questioned or if you need to prove that maintenance was performed properly.

Practical Takeaway: Keep your vehicle's warranty documents and service records organized. When you schedule a service appointment, have your warranty information ready. If you perform maintenance at an independent shop rather than a dealership, keep the receipt as proof of maintenance in case warranty coverage is questioned.

Different Ford Warranty Types and Coverage Periods

Ford offers various warranty options with different coverage periods and terms. The guide provides information about the different warranty types available to help you understand what coverage may apply to your specific vehicle.

Free Guide to Submitting Videos to America's Funniest Videos →

Most new Ford vehicles include a basic limited warranty that covers defects in materials and workmanship for a specified time period and mileage. This is the factory warranty included with vehicle purchase. Different model years and vehicle types may have