Get Your Free Coilover Adjustment Guide

Understanding Coilover Suspension Systems and Why Adjustment Matters

Coilover suspension systems combine a coil spring and a shock absorber into one integrated unit. This design has become popular in both performance vehicles and daily drivers because it offers flexibility in how a vehicle handles and sits. Unlike traditional suspension setups where springs and shocks are separate components, coilovers allow drivers to make adjustments to ride height, stiffness, and damping characteristics without replacing major parts.

Free Guide to Keen Shoes Senior Discount Options →

The basic structure of a coilover consists of a shock absorber body with a coil spring wrapped around it. The spring sits on an adjustable collar that can move up and down the shock shaft. By rotating this collar, you change where the spring makes contact with the shock body, which directly affects how high or low your vehicle sits. This adjustment mechanism is what makes coilovers so popular among vehicle enthusiasts who want to customize their setup without major modifications.

Understanding how coilovers work helps you recognize why proper adjustment is important. When a coilover is set incorrectly, several problems can occur. A spring that is too loose may not provide enough support, causing excessive body roll during cornering and a bouncy ride. A spring that is too tight can make the suspension overly stiff, creating an uncomfortable ride and reducing tire contact with the road. Both scenarios can affect handling, comfort, and even tire wear patterns.

Different vehicles require different coilover setups based on their weight, intended use, and suspension geometry. A sports car might benefit from stiffer settings and lower ride height, while a daily driver might prefer a softer setup with moderate height. Understanding these basic principles helps you make informed decisions about your own vehicle's suspension configuration.

Practical Takeaway: Spend time learning what coilovers are and how their adjustment mechanisms work. This foundation makes all other adjustment decisions clearer and helps you understand why certain settings work better for your vehicle and driving style.

Basic Adjustment Parameters: Height, Spring Rate, and Damping

Coilover adjustment generally involves three main parameters, each affecting different aspects of your vehicle's performance. Understanding each one separately makes the overall adjustment process less confusing and helps you identify which settings influence the specific characteristics you want to change.

How to Remove Stickers From Car Windows →

Ride height is the most visible adjustment on a coilover system. This refers to the distance between your vehicle's chassis and the ground. Most coilovers use a threaded collar around the shock body to adjust height. You turn this collar clockwise to lower the vehicle or counterclockwise to raise it. Even small adjustments—often as little as one-quarter turn—can change your ride height by nearly half an inch. Lowering a vehicle slightly improves aerodynamics and handling by lowering the center of gravity, but going too low can cause rubbing issues and make bumps feel harsher. For reference, performance-oriented vehicles often run 1 to 2 inches lower than stock height, while comfort-focused setups might only go down half an inch or stay at stock height.

Spring rate refers to how much force is required to compress the spring by a given distance. Spring rates are measured in pounds per inch (lb/in). A lower spring rate (say, 400 lb/in) creates a softer, more comfortable ride because less force is needed to compress the spring. A higher spring rate (say, 800 lb/in) creates a stiffer, firmer ride that resists body movement more aggressively. For daily drivers, spring rates typically fall between 400 and 600 lb/in. Track-focused vehicles might use 800 to 1200 lb/in or higher. Changing spring rate requires replacing the actual spring, unlike height adjustment which just repositions the existing spring.

Damping is the shock absorber's ability to control how quickly the spring compresses and extends. Adjustable coilovers feature separate knobs or dials for compression damping (resistance when the suspension compresses) and rebound damping (resistance when it extends). These adjustments don't have a single "correct" setting—they depend on your driving style and road conditions. A setting of 12 clicks on a 24-click adjustment range might feel right during highway driving but too soft for aggressive cornering. Many adjustable coilovers allow between 16 and 32 different damping positions, giving significant tuning flexibility.

Practical Takeaway: Start by learning which adjustment affects which behavior. If your car feels bouncy, it's likely a damping issue, not a height issue. If it sits too high or low, you need height adjustment. Knowing this connection prevents making unnecessary changes and helps you focus on the parameter that actually solves your problem.

Tools and Preparation Steps Before Making Adjustments

Before adjusting coilovers, gather the proper tools and prepare your vehicle correctly. Using the right tools makes adjustments more accurate and helps prevent damage to your suspension components. Most coilover adjustments require basic hand tools found in standard toolkits, though the specific items depend on your coilover brand and design.

Your Free Xfinity Bill Pay Guide →

Essential tools for coilover adjustment include an adjustable wrench or socket set (typically 10mm to 19mm sizes), a coilover adjustment tool or wrench specific to your brand, and a jack with jack stands for safely raising the vehicle. Some coilover brands provide proprietary adjustment tools in their packaging; these are designed specifically to fit the adjustment collars without slipping or damaging them. Using the correct tool prevents rounding off or scratching the adjustment collar. If your coilovers came with a specific tool, keep it in a safe location for future use.

You'll also need measuring tools to track your changes. A tape measure works for basic measurements, but many enthusiasts use more precise methods like bump stops or reference markers. Some people mark the position of the adjustment collar with a marker or tape before making changes, allowing them to reverse adjustments if needed. A level tool helps verify that your vehicle sits evenly front-to-back and side-to-side after adjustments.

Preparation steps are equally important as having tools. Start by positioning your vehicle on level ground and raising it safely using a jack and jack stands. Never work under a vehicle supported only by a jack. Allow the suspension to fully extend before measuring or adjusting. Take baseline measurements of ride height at all four corners before making any changes. This gives you a reference point and helps you understand what each adjustment accomplishes. Some people photograph their setup before and after adjustments, which provides visual documentation of changes.

Check your coilover manual for vehicle-specific adjustment procedures and recommended settings. Different vehicles have different suspension geometries, and some coilovers have adjustment limits or specifications that apply only to certain makes and models. Your vehicle's weight, ride height preferences, and intended use all influence what settings will work well for your situation.

Practical Takeaway: Preparation prevents mistakes and damage. Spend time gathering proper tools, securing your vehicle safely, and taking baseline measurements before making any actual adjustments. This groundwork makes the adjustment process itself much smoother and more predictable.

Step-by-Step Height Adjustment Instructions

Ride height adjustment is typically the first change owners make because it's the most straightforward and most visible. The process follows similar steps regardless of the specific coilover brand, though you should always consult your product manual for brand-specific guidance.

Learn About LAZ Parking and How It Works →

Begin with your vehicle safely raised on jack stands and the suspension fully extended. Measure the current ride height at several points—typically at the wheel well, fender, or chassis—at all four corners. Write down these measurements. This baseline tells you exactly how much height change you need to make and helps you verify the results of your adjustments. Many people measure from a fixed point on the wheel well to the ground, as this measurement is easy to repeat consistently.

Locate the threaded adjustment collar on your coilover. This is usually a ring-shaped component that slides along the shock body. Some coilovers have the collar at the top of the shock (in the engine bay), while others have it lower down (under the car). Consult your manual if you're unsure of the location. Using the appropriate wrench or adjustment tool, grip the collar and turn it slowly. Clockwise rotation typically lowers the vehicle by moving the spring seat down, while counterclockwise raises it. However, some brands reverse this direction, so verify before making changes.

Make small adjustments in quarter-turn increments at first. Each quarter turn typically changes ride height by about a half inch, depending on your specific coilover design. After each adjustment, lower