Get Your Free Briggs & Stratton Valve Clearance Guide

Understanding Valve Clearance in Briggs & Stratton Engines

Valve clearance, also called valve lash, refers to the small gap between the tip of a valve lifter and the valve stem in your Briggs & Stratton engine. This gap is essential for proper engine operation. When your engine heats up during use, metal parts expand slightly. Without this intentional gap, the valve might not close completely as the engine warms, which would cause compression loss and performance problems.

Your Free Home Heating Resources Guide →

Briggs & Stratton engines power many common machines, including lawn mowers, generators, pressure washers, and small construction equipment. These engines range from single-cylinder models to larger multi-cylinder designs. Each engine type has specific valve clearance measurements that manufacturers have determined through testing and engineering.

The valve clearance specifications typically range from 0.003 to 0.008 inches, depending on your specific engine model and whether you're measuring the intake or exhaust valve. The intake valve usually has a slightly smaller clearance than the exhaust valve. Using the wrong measurement can lead to poor starting, rough idling, reduced power output, or valve damage over time.

Checking and adjusting valve clearance is a maintenance task that many equipment owners can learn to perform themselves. Unlike some engine repairs requiring specialized tools, valve clearance adjustment uses basic equipment you may already have available. Understanding the fundamentals helps you recognize when your engine might need this service and why it matters for engine longevity.

Practical takeaway: Valve clearance is a critical but often-overlooked maintenance factor. Learning the basics helps you understand what mechanics do when servicing your engine and why regular maintenance keeps your equipment running smoothly.

How to Locate Your Engine Model and Find Correct Specifications

Every Briggs & Stratton engine has a unique model number that tells you important information about that specific engine. Finding your model number is the first step toward getting accurate valve clearance specifications. The model number appears on a metal or plastic tag attached to the engine, usually on the side of the cylinder block or beneath the air filter housing.

Get Your Free Will Cost Information Guide →

The model number format varies by engine type. Older engines might have a simple format like "190402," while newer engines use formats like "306777-0011-B1." The numbers and letters contain coded information about engine displacement, horsepower, and manufacturing details. You may also see a type number and code number on the same tag.

Once you have the model number written down, you have several options for finding the correct valve clearance specifications. The original equipment manual is the most reliable source and contains complete maintenance information including valve clearance measurements. If you don't have the manual, the Briggs & Stratton website offers a manual finder tool where you can enter your model number and download the document directly.

Different engine series have different specifications. For example, a Briggs & Stratton 5000 series engine might specify 0.005 inches for intake valves and 0.007 inches for exhaust valves, while a 6000 series engine could have different measurements. Using the wrong specification can cause engine problems, so confirming the exact numbers for your model is essential before making any adjustments.

If you cannot locate your model number or cannot find matching information, contacting a Briggs & Stratton authorized service center provides another way to obtain accurate specifications. Many centers can look up your engine information by describing the equipment it powers or by examining photos of the engine tag.

Practical takeaway: Spend time finding and recording your complete engine model number before attempting any valve work. This single step prevents mistakes and ensures you use correct specifications for your specific engine.

Tools and Equipment You Need for Valve Clearance Checking

Checking valve clearance requires a few basic tools, most of which are inexpensive and commonly available. The primary tool is a feeler gauge set, which consists of thin metal blades of precisely measured thicknesses. These gauges allow you to measure the gap between the valve lifter and stem. A standard feeler gauge set costs between $10 and $25 and lasts for many years of use.

Get Your Free Apple Pay Billing Address Change Guide →

You will also need basic hand tools including a socket set, wrenches, and screwdrivers to remove the engine cover and valve cover. A spark plug socket helps you remove the spark plug, which you should do before working on valve clearance. Most home garages have these tools already available. If you don't, individual tools cost less than purchasing specialized valve clearance equipment.

A torque wrench becomes important when reassembling components, as bolts must be tightened to specific tensions to prevent leaks or damage. Torque specifications appear in your engine manual, typically ranging from 3 to 15 foot-pounds for valve cover bolts, depending on engine size. If you don't own a torque wrench, borrowing one from a friend or purchasing a basic model for $20 to $40 provides a worthwhile investment for long-term equipment maintenance.

Additional helpful items include a clean work surface, rags for cleaning, a notebook for recording measurements, and good lighting. Some people use a small penlight or headlamp when working in the valve area, as the space can be tight and lighting matters for accuracy. A gasket scraper helps remove old gasket material when reinstalling the valve cover, preventing leaks.

Briggs & Stratton publishes valve clearance guides that include diagrams showing where components are located and how to position the engine before measuring. These diagrams help you understand the exact procedure for your engine type. Having these guides printed or displayed on a tablet beside your work area keeps important information visible while your hands work on the engine.

Practical takeaway: Most valve clearance work requires tools you probably already own. Gathering everything before starting prevents frustrating mid-project trips for missing items and keeps your work organized.

Step-by-Step Procedure for Measuring Valve Clearance

Begin by ensuring your engine is completely cold. Hot metal expands, which would give you inaccurate measurements. If your engine has been running, let it cool for at least an hour before starting. Remove the spark plug wire from the spark plug to prevent accidental starting, then locate the valve cover bolts and remove them using the appropriate socket or wrench.

Get Your Free Guide to Leaving LinkedIn →

Carefully lift off the valve cover, noting how it sits so you can reinstall it properly. You may need to gently pry it if gasket material has sealed it tightly. Once removed, you can see the valve stems and lifters. Locate the top of the engine, often marked with a timing mark or line. You need to position the engine so the piston is at top dead center, where both valves are fully closed and the valve springs are relaxed.

To find top dead center, look for a mark on the flywheel that aligns with a mark on the engine body. Slowly turn the engine by hand (using the recoil handle or a wrench on the crankshaft bolt) until these marks align. This positioning ensures your measurements are accurate and the valves are in their resting position.

With the engine positioned correctly, place your feeler gauge of the specified thickness between the valve stem and the lifter. The gauge should slide in with slight resistance, similar to a piece of paper sliding through fingers. If the gauge doesn't fit, the clearance is too tight. If it slides in easily with no resistance, the clearance is too loose. Either situation means adjustment is needed.

Record your measurements for each valve. Most small engines have two valves (intake and exhaust), but larger engines may have four or more. Write down which valve you measured and whether the clearance was correct, too tight, or too loose. This information helps you determine if adjustment is necessary and guides the adjustment process.

Practical takeaway: Taking accurate measurements starts with proper positioning and the right tools. Rushing this step leads to incorrect readings that cause larger problems later. Spend time getting the engine positioned correctly.

Information About Valve Clearance Adjustment Methods

Once you determine that adjustment is needed, you have options depending on your engine design. Some Briggs & Stratton engines use adjustable rocker arms with a locking nut and adjustment screw. On these engines, you loosen the lock nut slightly, then turn the adjustment screw clockwise to decrease clearance or counterclockwise to increase it. After each small adjustment, recheck the clearance with your feeler gauge until it

Free Guide to Fixing Common Outlook Problems →