Get Your Free Bathtub Refinishing Kit Guide

What Bathtub Refinishing Actually Involves

Bathtub refinishing is a process that restores the appearance and function of worn, stained, or damaged bathtubs without replacing them entirely. The process involves cleaning the tub surface thoroughly, repairing any chips or cracks, and applying a new coating to create a fresh, smooth finish. Understanding what refinishing involves helps you decide whether this option works for your situation.

Social Security Office Hours and Holiday Information →

The refinishing process typically takes between 24 to 48 hours from start to finish, though the actual work time is usually just a few hours. A refinisher will first drain and clean your bathtub completely, removing soap scum, rust stains, and mineral deposits. Next, they sand or chemically strip the existing surface to prepare it for a new coating. The surface must be completely clean and slightly roughened so the new coating adheres properly.

Once prepared, the refinisher applies a bonding agent followed by the new coating material. Most professionals use either acrylic, epoxy, or polyurethane-based coatings. Acrylic coatings are the most common for consumer refinishing because they dry quickly and produce a glossy finish. Epoxy coatings are harder and more durable but take longer to cure. The new coating is typically applied in multiple thin layers to ensure even coverage and maximum durability.

Common reasons people refinish bathtubs include addressing stubborn stains that won't clean away, repairing visible chips or cracks in the surface, changing the color of an outdated tub, and restoring shine to a dull finish. Statistics from the National Association of Home Builders show that bathroom updates are among the most common home improvement projects, with refinishing being a cost-effective alternative to full replacement. A typical bathtub replacement costs $3,000 to $8,000 with installation, while refinishing costs $300 to $1,000.

Practical Takeaway: Before pursuing refinishing, take clear photos of your tub's current condition from multiple angles. Document stains, chips, and discoloration. This record helps you understand what the refinishing process can realistically address and sets expectations for the finished result.

Materials and Tools You'll Need for DIY Refinishing

If you're considering refinishing a bathtub yourself, understanding the materials involved is essential. A DIY bathtub refinishing kit typically includes a coating material (usually acrylic or epoxy), a bonding agent or primer, sandpaper or a chemical stripper, cleaning agents, and basic application tools. Many kits are designed for homeowners without professional experience, though results vary based on application skill and conditions.

Get Your Free Guide to DMV Appointment Requirements by State →

The coating material is the most important component. Acrylic refinishing coatings are the most common for DIY kits because they're easier to apply than epoxy or polyurethane options. Acrylic typically comes in white, almond, or bone colors, with limited color variation between brands. The coating material comes in pre-measured quantities for a standard bathtub, usually requiring 2 to 4 quarts total. Always check your kit's specifications to understand how much coating is included and whether it's sufficient for your tub size.

Surface preparation materials are equally important as the coating itself. Most kits include 120-grit to 220-grit sandpaper for surface preparation. Some kits offer chemical strippers as an alternative to sanding, which reduces dust but may produce stronger chemical odors. Bonding agents or primers help the new coating stick to the existing surface. Your kit should include a brush or roller for application, though some people prefer spray application for smoother results. A spray application requires either an included spray gun or renting equipment separately.

Safety and cleanup materials matter too. You'll need protective equipment including gloves, eye protection, and a respirator or N95 mask for dust or chemical fumes. Good ventilation is critical—opening windows and using fans throughout the process helps disperse fumes and speeds drying. Have rags or paper towels available for cleanup and spill management. Most kits cost between $50 and $300, depending on quality and brand reputation. Budget-friendly kits at the lower end may require touch-ups or produce less durable finishes, while higher-priced kits often include better quality materials and more complete supplies.

Practical Takeaway: Create an inventory checklist of everything in your kit before starting. Compare the included items against the manufacturer's instructions to confirm nothing is missing. If items are missing or damaged, contact the supplier before beginning work so you can obtain replacements without interrupting the process.

Step-by-Step Preparation of Your Bathtub Surface

Proper surface preparation determines whether your refinishing project succeeds or fails. Rushing this stage is the most common reason DIY refinishing projects produce poor results. The bathtub surface must be completely clean, free of soap buildup, and properly abraded so the new coating bonds securely. This preparation typically takes 4 to 8 hours depending on your tub's condition and your approach.

Get Your Free Nordstrom Rack Credit Card Payment Guide →

Start by removing all items from the tub and bathroom to ensure clean work space. Drain any standing water and allow the tub to dry completely. Begin with a thorough cleaning using a bathroom cleaner or degreaser to remove soap scum, body oils, and mineral deposits. For stubborn stains, let the cleaner sit for 15 to 30 minutes before scrubbing. Use a non-abrasive sponge or soft brush for this initial cleaning—you're not trying to strip the surface yet, just remove contaminants. Rinse thoroughly with clean water and let dry again.

Next comes the surface abrasion step. If your kit includes sandpaper, start with 120-grit to remove the existing gloss and open the surface for the new coating. Sand the entire tub surface using circular motions, paying special attention to the bottom and sides where wear is heaviest. This process creates visible dust, so wear a respirator and maintain ventilation. Sand until the surface looks slightly dull and uniform, typically 30 to 60 minutes of work. Follow with 220-grit sandpaper to smooth the surface and remove scratches from the coarser grit. This final sanding should take 20 to 30 minutes.

If your kit includes a chemical stripper instead of sandpaper, follow the manufacturer's instructions carefully. Chemical strippers work by dissolving the existing coating rather than mechanically removing it. Allow the stripper to sit for the specified time—usually 15 to 45 minutes—then scrape away the loosened material with a plastic scraper. Avoid metal scrapers that can damage underlying material. After stripping, rinse thoroughly and allow complete drying, which may take several hours. Some refinishing professionals recommend a light sanding with fine-grit paper even after chemical stripping to ensure proper surface texture.

The final preparation step involves a tack cloth or damp cloth to remove all dust and debris from sanding or stripping. This cleanup is crucial—any dust particles trapped under the new coating will create a rough, speckled finish. Use a tack cloth (a slightly sticky cloth designed for this purpose) or a damp microfiber cloth, wiping the entire surface, including edges and corners. Let the tub air dry for at least 30 minutes before applying any coating materials.

Practical Takeaway: Create a timeline that includes full drying time between each step. Rushing the process and applying coating to incompletely dried surfaces is a common cause of peeling or bubbling. Document your progress with photos at each stage so you have reference images if problems develop later.

Application Techniques for Refinishing Coatings

Applying the refinishing coating correctly produces the best results and ensures the coating lasts as long as intended. The application method, number of coats, and drying time between coats all affect the final appearance and durability. Most DIY kits provide either brush application or spray application, with spray generally producing smoother results but requiring more skill to execute properly.

Learn How to File a Small Claim Yourself →

Before applying any coating, ensure the room temperature is within the range specified by your kit—typically 50 to 85 degrees Fahrenheit. Temperature affects how quickly the coating dries and how it flows onto the surface. Too cold and it dries slowly and may not cure properly; too hot and it dries too fast, potentially creating brush marks or application lines. Humidity also matters—very high humidity can trap moisture and affect adhesion. If possible, refinish during relatively dry conditions and maintain ventilation