Get Your Free AirPods Reset Guide for All Models
Understanding AirPods Models and Their Reset Differences
Apple has released several distinct AirPods models over the years, and each one has slightly different reset procedures. The main models currently in use include AirPods (2nd generation), AirPods Pro (1st generation), AirPods Pro (2nd generation), AirPods Max, and AirPods (3rd generation). Understanding which model you own is the first step toward successfully resetting your device. You can identify your model by checking the Settings app on your connected device, visiting Apple's official support website, or examining the product documentation that came with your purchase.
Learn How Phonak Hearing Aids Connect to iPhone →
The reason different models have different reset procedures relates to their hardware design and software capabilities. Newer models like AirPods Pro (2nd generation) include additional features such as active noise cancellation, adaptive audio, and conversation awareness, which require more sophisticated pairing protocols. Older models like AirPods (2nd generation) use simpler Bluetooth connectivity without these advanced features. This difference in technology means the reset process varies in specific steps, though the general concept remains similar across all models.
When you reset AirPods, you're essentially erasing all stored pairing information and returning the device to factory settings. This action removes the memory of every device the AirPods have been connected to, allowing them to be paired fresh with a new device. Resetting is different from restarting, which is a simpler process that turns the AirPods off and back on without erasing any data.
Most AirPods models share common physical components: the earbuds themselves, a charging case with a battery, and the charging cable. The charging case contains a small button on the back (or sometimes on the bottom) that serves as the primary tool for performing a reset. Knowing where this button is located on your specific model is essential before you begin the reset process.
Practical Takeaway: Before attempting any reset procedure, identify your exact AirPods model by checking your device's Bluetooth settings or Apple's support documentation. Write down your model name so you can follow the correct reset steps designed specifically for your version.
How to Reset AirPods (2nd Generation)
AirPods (2nd generation) were released in 2019 and remain one of Apple's most popular models. The reset procedure for this model is straightforward and takes only a few minutes. To begin, place your AirPods inside their charging case and close the lid. Leave them closed for about 30 seconds to allow the device to register that they're in the case. This brief waiting period helps ensure the reset process works correctly.
Free Guide to TJX Credit Cards Explained →
Next, open the charging case lid but keep the AirPods inside. On the back of the charging case, you'll find a small circular button. Press and hold this button for approximately 15 seconds. You should watch the LED light on the front of the case as you press the button. Initially, the light will be white or amber, indicating that your AirPods are connected to your device. As you continue holding the button, the light will change to amber and will blink rapidly. This blinking amber light is the signal that your AirPods are entering reset mode.
Continue holding the button until the LED light turns white again and begins blinking slowly. This white blinking light indicates that your AirPods (2nd generation) have been successfully reset and are now in pairing mode, ready to connect to a new device. You can now release the button.
After the reset is complete, your AirPods will appear as an available device on your iPhone, iPad, Mac, or Apple Watch. Open the Bluetooth settings on whichever device you want to connect them to, locate your AirPods in the list of available devices, and tap to pair them. The entire process from start to finish typically takes fewer than five minutes.
Practical Takeaway: Use the LED light on the front of the charging case as your guide throughout the reset process. White blinking light means success, while amber blinking light means you're on the right track but need to keep holding the button.
Reset Instructions for AirPods Pro (1st and 2nd Generation)
AirPods Pro represent a more advanced line of Apple's wireless earbuds, with the first generation released in 2019 and the second generation in 2022. The reset process for both generations is nearly identical, making it easy to follow the same instructions whether you own the original AirPods Pro or the newer model. The primary difference between these models relates to their features rather than their reset procedure, such as adaptive audio and conversation awareness being exclusive to the second generation.
Free Guide to Finding House Floor Plans →
To reset AirPods Pro, start by placing both earbuds into their charging case and closing the lid completely. Wait for approximately 30 seconds. This waiting period allows the AirPods to register that they're in the case and prepares them for the reset command. After the 30-second wait, open the charging case lid while keeping the AirPods inside the case.
Locate the small button on the back of the charging case (you may need to feel for it with your finger). Press and hold this button for about 15 seconds, watching the LED light on the front of the case. The light will initially appear white or amber. As you continue holding the button, the light will transition through amber and into rapid amber blinking. Keep holding the button until the LED light becomes white and then begins blinking slowly. This slow white blink indicates that your AirPods Pro have completed the reset process.
One important note for AirPods Pro owners: if your AirPods Pro are currently connected to a device, you may need to manually disconnect or forget them before starting the reset process. You can do this through your device's Bluetooth settings. Go to Settings, select Bluetooth, find your AirPods Pro in the list, and choose "Forget This Device." After this step, proceed with the physical reset using the charging case button as described above.
Practical Takeaway: For AirPods Pro, the reset button location is slightly more difficult to locate than on standard AirPods. Feel along the back of the charging case carefully, and don't be afraid to apply firm pressure when pressing and holding the button.
Resetting AirPods (3rd Generation)
AirPods (3rd generation) were introduced in 2021 as an updated version of the standard AirPods line. They include some features previously exclusive to AirPods Pro, such as adaptive audio and automatic switching between devices. Despite these enhancements, the reset process remains very similar to earlier AirPods models. The charging case design is nearly identical, and the button location and reset sequence follow the same general pattern.
Get Your Free Amazon Card Credit Guide →
To reset AirPods (3rd generation), place both earbuds into the charging case and close the lid. Wait approximately 30 seconds for the device to register. Open the case lid while keeping the AirPods inside. Locate the small button on the back of the charging case and press and hold it for about 15 seconds. Watch the LED indicator on the front of the case as you do this.
You'll observe the LED light change colors and blink patterns as you hold the button. Initially, it may appear white or amber. As you continue, it will blink amber rapidly. Keep holding until the light becomes white and blinks slowly. This slow white blinking indicates successful completion of the reset. Your AirPods (3rd generation) are now in pairing mode and ready to connect to a new device.
One feature unique to AirPods (3rd generation) is their automatic switching capability. This means once you've reset them and paired them with one device, they may automatically switch to another device when you use that device. To manage this behavior after resetting, you can visit the settings on each of your Apple devices and configure which devices you want the AirPods to automatically switch between. This is found in Settings > Bluetooth > [Your AirPods] > Details.
Practical Takeaway: After resetting AirPods (3rd generation), take time to review your automatic switching settings if you own multiple Apple devices. This ensures your AirPods connect to the device you intend to use at any given moment.
Understanding AirPods Max Reset and Advanced Models
AirPods Max represent Apple's premium over-ear headphone offering, introduced in late 2023. As a more complex device with additional hardware
This guide is for general information only and is not medical, financial, legal, or other professional advice. For decisions specific to your situation, consult a qualified professional. See our Editorial Policy.