Get Your Free Above-Range Microwave Installation Guide

Understanding Above-Range Microwaves and Installation Basics

An above-range microwave, also called an over-the-range microwave, is a kitchen appliance that mounts directly above your stove. Unlike countertop models that sit on your counter, these units are built into the space between your stovetop and kitchen cabinets. This design choice has become increasingly popular in American kitchens—according to the National Kitchen and Bath Association, over 60% of kitchen renovations in recent years include over-the-range microwave installations.

Delete Instagram Account Information Guide →

The primary advantage of above-range microwaves is space efficiency. In kitchens where counter space is limited, mounting the microwave above the stove creates usable workspace below. These units typically measure 30 inches wide (standard for most ranges) and project 15 to 20 inches from the wall. They usually include a built-in ventilation system that removes cooking odors and steam from the stovetop area.

Installation of above-range microwaves involves several key components: electrical wiring, ventilation ducting (or recirculation setup), mounting hardware, and often modifications to existing cabinetry. Many homeowners wonder if they can install these units themselves. While some people with electrical and carpentry experience do attempt DIY installation, manufacturer guidelines typically recommend professional installation to ensure proper ventilation, electrical safety, and warranty coverage.

The cost to install an above-range microwave through professional services generally ranges from $150 to $500, depending on your location and whether existing ductwork modifications are needed. This guide focuses on the information and steps involved in the installation process, helping you understand what to expect if you choose to have this work done.

Practical Takeaway: Before pursuing installation, measure your existing space carefully. Standard above-range microwaves require a 30-inch-wide opening and roughly 16 to 18 inches of vertical clearance. Most building codes require at least 66 inches of clearance between the cooking surface and any combustible material above it, though some manufacturers require up to 72 inches.

Ventilation Requirements and Options for Your Installation

Ventilation is the most critical aspect of above-range microwave installation. These units are designed to capture steam, grease, and cooking odors from your stovetop. According to the Home Ventilation Institute, proper kitchen ventilation should remove at least 100 cubic feet per minute (CFM) of air for electric ranges and 150 CFM for gas ranges. Above-range microwaves typically provide 300 to 400 CFM of ventilation capacity, which exceeds these minimums.

Learn About Free Home Internet Options →

There are two main ventilation approaches: ducted and recirculating. A ducted system removes air directly outside your home through ductwork that runs through walls, ceilings, or exterior walls. This method is more effective at removing heat, moisture, and odors completely from your kitchen. Recirculating systems filter the air through charcoal filters and return it to your kitchen. While recirculating systems are easier to install (they require no ductwork), ducted systems provide superior air quality and moisture control.

For ducted installations, several factors affect the complexity and cost. If your kitchen already has ductwork from a previous range hood, the installation becomes simpler—installers may be able to connect the new microwave to existing ducts. If no ductwork exists, installers must create it. This might involve running ducts through walls, under cabinets, or through the attic, depending on your home's construction. Exterior wall installations are typically easiest and least expensive. Interior wall installations require more labor to navigate around studs, electrical wiring, and plumbing.

Ductwork materials matter for performance and safety. Most installers use either rigid aluminum ductwork or flexible ducting. Rigid ductwork provides better airflow and is less likely to accumulate grease buildup, but it requires more careful measurement and fitting. Flexible ducting is easier to install but can restrict airflow if kinked or compressed. Building codes in most areas require that any ductwork running through unheated spaces (like attics) be insulated to prevent condensation buildup.

Practical Takeaway: Request that your installer use rigid ductwork rather than flexible ducting if possible, and confirm that any ductwork runs as straight and short as possible to your exterior wall. The shorter the duct run, the more efficient your ventilation system will be. If recirculating is your only option, request high-quality charcoal filters and plan to replace them every 6 to 12 months for best performance.

Electrical Wiring and Safety Considerations

Above-range microwaves require dedicated electrical circuits and proper grounding to operate safely. According to the National Electrical Code (NEC), microwave ovens should be connected to a 20-amp dedicated circuit or a circuit shared only with the range (in some cases). Your home's electrical panel provides the foundation for this connection. Most homes built in the last 30 years have sufficient panel capacity, but older homes sometimes need upgrades.

Learn Korean as a Beginner: Free Getting Started Guide →

There are three common electrical configurations for above-range microwave installation. The first is a hardwired connection, where the microwave is connected directly to your home's electrical system through a junction box. The second is a plug-in connection, where the microwave plugs into an outlet installed above the range or in the cabinet behind the unit. The third, less common approach involves connecting the microwave to the existing range circuit if local codes permit it and if the circuit has sufficient capacity.

Most building codes and manufacturers require hardwired installations for safety and warranty compliance. A hardwired connection means the microwave cannot be easily unplugged, which prevents accidental electrical contact and ensures continuous power. The installation typically involves running electrical wire from your home's panel (or a nearby outlet) through walls and into a junction box located behind or above the microwave. A licensed electrician determines the appropriate wire gauge (typically 12 AWG or 10 AWG) based on the circuit amperage and distance from the panel.

Safety considerations extend beyond basic wiring. Proper grounding prevents electrical shock hazards. The electrical outlet or hardwired connection must include a ground wire connected to your home's grounding system. Additionally, the space where electrical wiring runs must be protected from moisture, since kitchens are wet environments. Any exposed wiring should run through conduit (protective tubing), and all connections must be made inside approved junction boxes sealed with proper covers.

Many homeowners ask whether they can perform electrical work themselves. While some states and localities allow homeowners to do certain electrical work with proper permits and inspections, above-range microwave installation is complex enough that most jurisdictions require a licensed electrician. This requirement protects your home's safety and maintains your homeowner's insurance coverage. Electrician fees for this work typically range from $150 to $400, depending on the complexity and your location.

Practical Takeaway: Before installation, obtain a copy of your home's electrical panel schematic or have an electrician assess your panel to confirm it has available breaker space. Ask the electrician to confirm whether a hardwired or plug-in connection is appropriate for your situation, and request that all work be done with proper permits and final inspections. This protects your home and maintains your insurance coverage.

Cabinet Modifications and Support Structure

Installing an above-range microwave often requires modifying your kitchen cabinetry. Above-range microwaves are heavy—most models weigh between 80 and 150 pounds—so they need solid support and must be properly secured. The installation guide focuses on understanding the modifications that may be necessary before installation begins.

How to Pay Your PNM Electric Bill →

The most common modification involves removing or repositioning the cabinet that sits directly above your range. Many kitchens have a cabinet with a soffit (the underside visible from below) in this location. To accommodate the microwave's depth and ventilation requirements, this cabinet must either be removed entirely, have its bottom surface cut away, or be repositioned higher. Removing the cabinet provides the most space and easiest installation, but it eliminates storage that many homeowners want to keep. Repositioning the cabinet higher maintains some storage while making room for the microwave below.

The mounting structure is critical for safety. Above-range microwaves are installed using special mounting brackets that attach to the wall studs behind the cabinetry. These brackets bear the weight of the unit, so they must be secured to solid wood framing rather than just drywall. The installation typically involves locating the studs in the wall, installing