Free ResMed AirSense 11 Cleaning and Maintenance Guide

Understanding Your ResMed AirSense 11 Device

The ResMed AirSense 11 is a continuous positive airway pressure (CPAP) machine designed to treat sleep apnea by delivering pressurized air through a mask to keep your airway open during sleep. This device has become one of the most widely used CPAP machines because it combines portability with advanced features. Understanding your specific device model helps you maintain it properly and get the most consistent performance over time.

Free Guide to Finding Apartments With Utilities Included →

Your AirSense 11 contains several key components that work together. The main unit houses a motor that pulls in room air, filters it, and pressurizes it to your prescribed setting. The heated humidifier chamber adds moisture to the air, which reduces dryness in your nose and throat. The tubing carries the pressurized air from the machine to your mask, and the mask itself sits on your face and creates a seal so the air reaches your airways. Each component requires different maintenance approaches based on how it functions and what materials it contains.

ResMed machines track usage data through built-in memory cards or cloud connectivity. This information shows how many hours you've used the device, what pressure settings were delivered, and whether any issues occurred during use. Many users don't realize this data can help them identify when cleaning or maintenance is needed. For example, if your machine shows increased pressure variations or apnea events, it might indicate that your mask needs cleaning or that a filter requires replacement.

The materials in your AirSense 11 vary significantly. The machine housing is plastic, the humidifier chamber is usually polycarbonate or similar material, tubing is silicone or plastic, and masks come in various fabrics and silicones. Each material has different cleaning requirements. Using the wrong cleaning method or products can damage these materials, reduce the lifespan of your equipment, or create safety issues. Knowing what you're working with prevents costly damage.

Practical Takeaway: Before you begin any cleaning or maintenance, spend time identifying each part of your machine. Take photos or create a simple diagram showing the humidifier chamber, filter locations, tubing connections, and mask components. This reference guide will help you remember how everything fits together when you reassemble your equipment after cleaning.

Daily and Weekly Cleaning Procedures

Consistent daily cleaning of your mask is the single most important maintenance task you can perform. Your mask contacts your skin every night and accumulates skin oils, moisture, dust, and sometimes bacteria. Studies show that masks used without daily cleaning develop visible buildup within 3-5 days and can harbor bacteria that increases sinus infections and skin irritation. Daily cleaning takes only 5-10 minutes but prevents most common problems associated with CPAP therapy.

Free Guide to Autism Training Supplies and Resources →

To clean your mask daily, start by disconnecting it from the tubing before bed or in the morning. Use warm (not hot) water and a mild soap without fragrance or lotions. Castile soap works well for this purpose. Submerge the entire mask except for any electronic components, and use your fingers to gently clean the underside where it contacts your skin. Pay special attention to the areas where silicone cushions attach to the frame, as these crevices collect the most debris. Rinse thoroughly with clean water until no soap residue remains, then air dry on a clean cloth. Never use a cloth to dry your mask, as lint can create seal problems.

Your tubing accumulates condensation inside, which can harbor bacteria and mold if not managed. Warm air from your humidifier cools as it travels through tubing, creating moisture droplets inside the tube. To prevent this, many users add a tubing cover (available from ResMed) or tilt their tubing so condensation drains toward the humidifier rather than toward the mask. Once weekly, disconnect your tubing and hold it up to a light to inspect the interior. If you see moisture or cloudiness, this indicates condensation buildup. Run warm water through the tubing to rinse the interior, then hang it vertically to drain completely and air dry.

Weekly cleaning of the humidifier chamber is essential, particularly if you live in a humid environment where mold grows more quickly. Remove the chamber and discard any remaining water from the previous night. Rinse the chamber with warm water and dry it thoroughly with a clean, lint-free cloth. Do not submerge electronic heating plates if your model has them. Once weekly, fill the chamber with equal parts distilled water and white vinegar and let it sit for 30 minutes. This prevents mineral buildup and mold growth. Rinse very thoroughly afterward, as vinegar residue can cause irritation. ResMed recommends using distilled water rather than tap water in your humidifier because minerals in tap water can accumulate on heating elements and reduce effectiveness.

Practical Takeaway: Create a simple checklist on your bathroom mirror: "Daily — Clean mask with soap and water. Weekly — Clean tubing interior, clean humidifier chamber, vinegar soak humidifier." Place this where you perform your cleaning so you develop a consistent routine. Habit formation typically takes 3-4 weeks, so expect that you'll need to reference this checklist regularly at first.

Filter Maintenance and Replacement Schedule

Your AirSense 11 contains one or more filters that remove dust, pollen, and other particles from room air before it enters your machine. The exact number and type of filters depends on your specific model—some have one disposable filter, while others have both a disposable filter and a reusable filter. Neglecting filter maintenance is one of the most common reasons CPAP machines develop reduced performance. A clogged filter forces the motor to work harder, which increases noise, reduces air quality, and can eventually damage the motor itself.

Learn About Mission Lane Credit Card Pre-Approval →

Your machine most likely includes a white disposable filter (also called a foam filter or cartridge filter) that sits in a slot on the back or bottom of the machine. This filter is designed to be replaced, not cleaned. ResMed recommends replacing this filter every 2-4 weeks under normal conditions, though you should replace it more frequently if you live in a dusty environment, have pets, or live near construction. To check if your filter needs replacement, hold it up to a light. If you cannot see light through most of the filter surface, it's time for a new one. Continuing to use an overly dirty filter reduces the amount of filtered air entering your machine and can cause your pressure delivery to become inconsistent.

Some AirSense 11 models include a reusable filter (typically gray or blue colored) in addition to the disposable filter. This reusable filter can be cleaned rather than replaced. Clean it weekly by gently rinsing it with warm water and allowing it to air dry completely before reinstalling. Do not use soap on reusable filters as soap residue can affect air quality. Never run your machine with a wet filter installed, as moisture can enter the motor. Check your specific model's documentation to determine if you have a reusable filter, as not all versions include one.

Replacement filters are inexpensive—typically $15-30 for a pack of 2-4 filters—but many users delay replacement because they don't realize how dramatically a dirty filter affects performance. Studies of CPAP users show that those who replace filters on schedule report fewer pressure-related side effects and better sleep quality. Keep extra filters on hand so you're never tempted to stretch usage longer than recommended. Order replacement filters before you run out so you never operate your machine without a proper filter. When installing a new filter, note the direction indicated by arrows or text on the filter frame—most filters have a specific airflow direction, and installing one backward reduces its effectiveness.

Practical Takeaway: Set a phone reminder for every three weeks labeled "Check CPAP filter." When the reminder appears, hold your filter up to light and decide whether it needs replacement. If you have a reusable filter, rinse it during this check as well. Keep a small calendar next to your machine where you write the date you install each new filter—this creates a visual record of your maintenance pattern and helps you see whether you're replacing filters at appropriate intervals.

Addressing Mineral Buildup and Hard Water Issues

If you have hard water—water with high levels of calcium and magnesium minerals—your humidifier chamber will develop visible white or brownish mineral deposits that accumulate on the heating element and chamber walls. Mineral buildup reduces the effectiveness of your humidifier because deposits on the heating element prevent proper heat transfer, meaning your air doesn't get adequately warmed and humidified. In severe cases, mineral buildup can

Free Guide to Understanding Oral Thrush Treatment Options →