Free Guide to Toyota Highlander Remote Start Features

Understanding Toyota Highlander Remote Start Technology

Remote start technology allows drivers to start their Toyota Highlander engine from a distance without being inside the vehicle. This feature uses a wireless signal sent from a key fob or mobile device to communicate with your vehicle's starter system. When you press the remote start button, the vehicle receives the command and begins its engine startup sequence automatically. The engine will typically run for a set time period, usually between 10 to 15 minutes, before automatically shutting off if you don't shift the vehicle into gear or if the ignition isn't manually turned on during that window.

Get Your Free Subscription Services Information Guide →

Toyota has integrated remote start capabilities into various Highlander model years, though the specific features and methods of activation vary depending on your vehicle's year and trim level. Newer models (2018 and later) generally include this feature as part of their Connected Services package, which is powered by Toyota's proprietary technology platform. The system is designed with multiple safety features built in. For example, the vehicle will not start if the doors are locked from the inside, and remote start typically requires that your foot is not on the brake pedal when you engage it from outside the vehicle. These safeguards prevent unauthorized or dangerous vehicle operation.

The technology behind remote start relies on the same key fob or digital key system that locks and unlocks your doors. When Toyota introduced this feature more widely across their lineup, they included it as part of their broader push toward connected vehicle technology. Unlike older aftermarket remote start systems that were added to vehicles after purchase, factory Toyota remote start is integrated directly into your vehicle's electrical and security systems, making it more reliable and secure.

Practical Takeaway: Remote start works by sending a wireless command to your Highlander's engine control module. Understanding that the vehicle has built-in safety features means you can use this technology without worrying about unauthorized starts or dangerous situations. If your Highlander is equipped with this feature, it will be referenced in your owner's manual under "Connected Services" or "Entune Features."

Which Toyota Highlander Models Include Remote Start

Remote start availability depends significantly on your Highlander's model year and trim level. Toyota began offering factory remote start on select Highlander models starting around 2014, but the feature became more standardized in 2018 and beyond. The 2018 Toyota Highlander Limited and Platinum trims were among the first to include this as a standard feature paired with Toyota's Entune infotainment system. By 2019 and 2020 model years, remote start appeared on more trim levels across the lineup, including some LE Plus variants depending on options packages selected at time of purchase.

Free Guide to Indoor Peace Lily Plant Care →

The 2021 through 2024 Highlander models expanded remote start availability even further. According to Toyota's specifications, the 2023 and 2024 models with Toyota Connected Services have remote start standard across Limited, Platinum, and higher trims. Some LE and LE Plus models may have access if the owner purchased additional technology packages or safety feature suites during vehicle configuration. The XLE trim level added this feature as standard starting in 2022 model year Highlanders equipped with the Connected Services package.

To determine whether your specific Highlander has remote start capability, check your owner's manual first—this is the most reliable source. Look in the index for "Remote Start," "Connected Services," or "Entune." If you purchased your Highlander used or inherited it, you can also contact a Toyota dealership with your vehicle identification number (VIN), and service advisors can confirm what features your particular vehicle includes. The vehicle's Monroney sticker (window label) from the time of original purchase would also list whether remote start was included or ordered as an option.

It's important to note that some older Highlanders (2014-2017 models) with remote start capability may have it disabled by default or require specific setup through a dealership. These earlier implementations sometimes required a Toyota dealership to enable the service on your account before it could be used, even though the hardware was present in the vehicle.

Practical Takeaway: Check your vehicle's year, trim level, and owner's manual to confirm remote start availability. If your manual doesn't mention this feature or if you're uncertain, contact a Toyota dealer with your VIN for clarification. This takes guesswork out of whether your Highlander actually has this capability.

How to Activate Remote Start Using Your Key Fob

If your Toyota Highlander includes remote start through the factory system, the key fob method is typically the most straightforward activation approach. Your key fob has multiple buttons—usually including lock, unlock, and panic buttons. To activate remote start with the key fob, press and hold the lock button on your key fob for approximately 3 to 5 seconds. The exact duration varies slightly between model years, so check your owner's manual for your specific vehicle. When you hold the lock button correctly, you should see your Highlander's lights flash, and you'll hear the engine crank to life.

Learn How to Propagate Umbrella Plants Successfully →

The process is designed with a safety verification step. The lights flashing confirm that your vehicle received the signal and is starting the remote start sequence. Some Highlanders will flash the lights once to indicate the engine is starting, and then a second time once the engine is fully running. You should see your vehicle's dashboard lights illuminate and possibly hear the air conditioning or heating system begin to operate, depending on your settings. The engine will remain running for the duration mentioned earlier—usually 10 to 15 minutes.

Certain conditions must be met for remote start to work through the key fob. Your vehicle must be locked and in Park. The gas tank must have a reasonable amount of fuel. If your Highlander's battery is very low, the remote start system may not have enough power to engage. Additionally, if you've recently turned off the engine and the catalytic converter is still very hot, some vehicles will prevent remote start for safety reasons—though modern Highlanders typically don't have this restriction.

One important note about key fob remote start: the signal range is typically 80 to 100 feet in open space, though obstacles like buildings or dense trees can reduce this distance significantly. If you're too far from your vehicle or if there's substantial interference, the remote start command won't transmit. You'll notice this because your lights won't flash, indicating the command didn't reach the vehicle's receiver.

Practical Takeaway: To use remote start with your key fob, press and hold the lock button for 3-5 seconds while your Highlander is locked and in Park. Watch for the lights to flash, confirming the command was received. Stay within reasonable distance (under 100 feet) and in an open area for the most reliable connection.

Using the Toyota Mobile App for Remote Start

Newer Toyota Highlander models (2018 and later with Connected Services) also offer remote start through the official Toyota mobile app, available on iOS and Android devices. This method provides an alternative to key fob activation and can work from much greater distances because it uses cellular data rather than direct wireless signals. To use the app for remote start, you first need to download the Toyota app and create an account linked to your vehicle through your VIN and vehicle registration information.

Learn About File Compression and Conversion Methods →

The setup process involves logging into the Toyota website or using the mobile app to pair your Highlander with your account. You'll need to verify your vehicle ownership and follow Toyota's authentication process to ensure only authorized users can control your vehicle remotely. Once your account is set up and your Highlander is registered, opening the app will show your vehicle's status and available features. The remote start button is typically displayed prominently on the main vehicle control screen within the app. Tapping this button sends the start command through Toyota's servers to your vehicle via cellular connection.

One significant advantage of app-based remote start is distance capability. While your key fob works within roughly 100 feet, the mobile app can start your Highlander from anywhere you have cellular data or internet connection. This means you could start your vehicle from inside your office building, from across town, or even while traveling. The app also shows your vehicle's location on a map, displays fuel level, and indicates whether doors are locked. Some versions of the app allow you to set up a PIN code or biometric authentication (fingerprint or face recognition) for added security.

To use this feature, you'll need an active Toyota Connected Services subscription. Some vehicles come with a trial period included, typically ranging from 3 to 10 years depending on model year and trim level. After the trial period expires, you may need to pay for continued access to these services, though the cost varies.