Free Guide to Toilet Plunger and Snake Use

Understanding How Plungers Work

A toilet plunger is one of the most useful tools for clearing minor clogs without calling a plumber. The basic principle behind a plunger is simple: it uses air pressure and suction to dislodge blockages in your drain. When you push the plunger down into the toilet bowl, you compress the air inside the rubber cup. When you pull up, you create a vacuum that pulls water and debris back up the drain. This back-and-forth motion, repeated several times, can break apart or move clogs that are blocking water flow.

Get Your Free Lost Vehicle Title Guide →

There are actually several types of plungers, though many people don't realize this. The most common for toilets is the flange plunger, which has an extra rubber extension at the bottom that fits inside the toilet drain opening. A cup plunger, which has a simple flat rubber cup, works better for sinks and bathtubs. Using the wrong type of plunger can make your clogging problem worse, so it matters to choose correctly. The flange plunger creates a better seal in a toilet bowl, which is critical for building the pressure needed to clear the blockage.

The science behind plunger use involves fluid dynamics. Water is incompressible, which means that when you create pressure on one side of a pipe, it transfers through the water to push against the clog. The clog might be made of toilet paper, personal hygiene products, or other organic matter that can break apart under pressure. According to plumbing resources, most toilet clogs that homeowners can clear themselves are located in the first few feet of pipe below the toilet. Clogs further down the drain line usually require professional equipment.

Understanding the mechanics helps you use a plunger more effectively. You're not trying to push the clog deeper into the pipes—that's a common misconception. Instead, you're creating pressure waves that loosen and break apart the obstruction. The repeated plunging action works better than a single strong push. Most clogs respond within 15 to 20 plunges, though some stubborn ones may take longer.

Practical takeaway: Select a flange plunger for toilet use, ensure it has a good rubber seal, and focus on creating a complete seal around the drain opening for maximum pressure.

Step-by-Step Guide to Using a Toilet Plunger

Using a plunger correctly involves several steps that will increase your chances of success. First, you need to prepare the toilet. If the water level is very low, add enough water so that the rubber cup of the plunger is completely submerged. This water coverage is essential because without it, you won't be able to create the necessary suction and pressure. If the water level is dangerously high and overflowing, you may need to turn off the water supply at the shutoff valve behind the toilet and flush once to lower the level before proceeding.

Get Your Free Guide to Understanding Specific Gravity →

Next, position yourself properly. Straddle the toilet with your feet shoulder-width apart to maintain balance. You'll be using your leg and core muscles as much as your arms, so a stable stance matters. Take the plunger and place it over the drain opening at the bottom of the toilet bowl. Make sure the rubber cup completely covers the opening and creates a seal. You may need to adjust your position to get this right.

Once you have a good seal, begin the plunging motion. Push down slowly at first, then pull up quickly. The pulling motion is actually more important than the pushing motion for clearing the clog. Repeat this action 15 to 20 times without breaking the seal. You should hear and feel a change in resistance as you work—this is a good sign that the clog is loosening. Some people describe it as feeling less "sticky" resistance.

After about 20 plunges, check your progress. If the water drains and the clog appears cleared, flush the toilet to rinse the bowl. However, don't use all the water in the tank yet if you're still unsure. A partial flush can help you determine if the clog is truly gone before using the full water supply. If the water still won't drain or drains very slowly, you can try plunging again for another 15 to 20 repetitions.

Practical takeaway: Focus on maintaining a complete seal, use firm pulling motions, and check your progress every 20 plunges rather than plunging continuously without assessment.

When to Use a Drain Snake Instead

A drain snake, also called a plumbing auger or drain auger, is a different tool that works on a different principle than a plunger. While a plunger uses pressure to break apart clogs, a drain snake physically reaches into the pipe to either pull out the clog or break it apart mechanically. Understanding when to use each tool can save you time and frustration. Generally, plungers work best for soft clogs made of organic material like toilet paper or minor buildup. Drain snakes work better for more solid obstructions, hair clogs, or items that have been stuck in the pipe.

Free Guide to UK Citizenship Routes and Requirements →

You should consider using a drain snake if plunging hasn't worked after 20 to 30 minutes of effort, or if you know the cause of the clog is something that plunging won't address. For example, if a child has flushed a toy down the toilet, a plunger won't help—you need a snake to physically retrieve or break apart the object. Similarly, if the clog is caused by a buildup of hair mixed with other material, a snake's rotating action can be more effective than pressure alone.

There are several types of drain snakes available for home use. A hand-crank auger is the most common and affordable option, typically costing between $15 and $50. These have a handle you turn to rotate a metal coil that extends into the pipe. Electric drain snakes are more powerful and can handle tougher clogs, but they cost more and take up storage space. Plumbing stores and hardware stores carry these tools in their rental sections if you don't want to buy one.

Using a drain snake requires care to avoid damaging your pipes. Modern PVC pipes can be damaged by aggressive snake use, particularly if you use a powerful electric auger. The snake should be fed slowly into the drain, and you should stop if you encounter significant resistance. Twisting too forcefully can crack pipes, which creates a much bigger problem than the original clog. For toilet clogs specifically, standard snakes designed for sinks may not be long enough or the right shape—toilet-specific snakes are sometimes called closet augers.

Practical takeaway: Try plunging first since it's less risky and often effective; move to a drain snake if plunging fails or if you know the clog is caused by a solid object or heavy hair accumulation.

How to Safely Operate a Drain Snake

Operating a drain snake involves specific techniques that help you clear the clog without damaging your plumbing. Start by removing any excess water from the toilet bowl using a small cup or wet vacuum. You need to see what you're doing, and standing water can get splashed. Some people place a bucket or old towels around the base of the toilet to catch any water that might spill during the process. Once the bowl is partially empty, position the auger so you can feed it into the drain opening.

Learn Master Lock Unlocking Methods and Techniques →

For a hand-crank auger, insert the tip into the drain opening slowly. You're not trying to force it through; you're feeling your way along the pipe. Once you've inserted about 6 inches of the auger cable, begin turning the handle with a steady, moderate speed. Continue feeding the cable into the pipe while turning. When you feel resistance, it could mean you've hit the clog or you've reached a bend in the pipe. Stop turning and try gently pushing and pulling the snake rather than forcing it further.

If you've reached the clog, you have a few options. You can continue rotating the snake handle, which may break apart the clog into pieces small enough to flush. Alternatively, you can try gentle pushing and pulling motions without rotating—sometimes this dislodges the obstruction. Some clogs, particularly those caused by solid objects, may be stuck firmly. In these cases, the snake might grab the object. Slowly retract the snake, turning the handle as you pull backward. Sometimes the clog comes out with the snake.

Safety considerations are important when using a drain snake. Wear work gloves in case the cable has sharp edges or comes out with something unpleasant.