Free Guide to Solving a Rubik's Cube Step by Step

Understanding the Rubik's Cube Basics

A Rubik's Cube is a three-dimensional puzzle made up of 54 colored squares arranged on six faces. Each face contains nine squares in a 3x3 grid pattern. The cube has 43 quintillion possible configurations, yet only one solved state where each face displays a single solid color. Despite this enormous number of combinations, the cube was invented in 1974 by Ernő Rubik, a Hungarian sculptor and professor of architecture, and has remained one of the world's most popular puzzles ever since.

Get Your Free Guide to Watching The Daily Show →

The physical structure of the cube consists of a central core with three axes that allow the cube to rotate. Surrounding this core are 26 smaller cubes called cubies. These include eight corner pieces (each with three colored sides), twelve edge pieces (each with two colored sides), and six center pieces (each with one colored side). The center pieces never move relative to each other, which means the white center will always be opposite the yellow center, the red opposite orange, and the blue opposite green on a standard cube.

Before attempting any solving method, you should become familiar with how the cube moves. A basic rotation involves turning any face 90 degrees clockwise or counterclockwise. Solvers use letter notation to describe these moves: U (up face), D (down face), L (left face), R (right face), F (front face), and B (back face). When a letter appears alone, it means a clockwise rotation when looking directly at that face. When followed by a prime symbol (') it means a counterclockwise rotation. A number 2 after a letter means turning that face 180 degrees.

Practical takeaway: Spend 10-15 minutes just rotating the cube randomly and observing how different pieces move. Understand that the center pieces are fixed reference points and that corner pieces always stay as corners while edge pieces stay as edges. This foundational knowledge prevents frustration when you begin the actual solving process.

The Layer-by-Layer Solving Method

The most popular approach for beginners is the layer-by-layer method, also called the "beginner's method" or "CFOP method" (standing for Cross, F2L, OLL, and PLL). This method breaks down the seemingly impossible task into four manageable stages that progress from simple to more complex. Statistics show that approximately 90 percent of casual cube solvers learn using variations of this method because it balances simplicity with actual progress toward solving the entire cube.

Get Your Free Guide to Waste Pickup Options →

The first stage involves solving the white cross on the bottom layer. This means positioning the four white edge pieces so they form a cross pattern with the white center at the middle. When placing these edges, you must also ensure that the side colors of each edge piece match the corresponding center pieces. For example, if an edge has white and red, it must be positioned between the white center and red center. This stage requires no special memorization and can be solved through logical thinking about how pieces move.

The second stage completes the white layer by inserting the four white corner pieces. Each corner piece has three colored sides, and it must be positioned so all three colors align with their respective center pieces. Learning to rotate corners into place without disrupting the white cross you've already built is the first technique that requires practice. Most beginners can solve this stage once they understand how to manipulate the cube without "undoing" previous work.

The third stage solves the middle layer, positioning four edge pieces that don't contain white or yellow. These edges create a complete first and second layer with no gaps. The fourth stage solves the yellow (opposite) side by first orienting all yellow edges correctly, then positioning them, and finally orienting and positioning the last four corner pieces.

Practical takeaway: The layer-by-layer method typically takes beginners 2-4 weeks of regular practice to perform from start to finish. Rather than trying to memorize all steps at once, master each layer before moving to the next. This prevents the cognitive overload that causes many people to quit prematurely.

Solving the White Cross and First Layer

The white cross is your foundation, and solving it correctly sets up everything that follows. To begin, hold the cube so the white center is on the bottom. Look at the four white edge pieces among the 12 total edge pieces on the cube. Your goal is to move all four of these to the bottom layer, arranged around the white center in a cross pattern. The key principle is that each edge piece has two colors, and both colors matter. The white side faces down, while the second color must match the center of its adjacent face.

Learn About Tech Access Programs →

To solve the white cross efficiently, first identify where each white edge currently is located. If a white edge is already in the bottom layer but in the wrong position, rotate the bottom layer to move it out of the way. Then locate it elsewhere on the cube and rotate it down into place. This stage requires no formula memorization. Instead, think about which face rotations will bring a white edge to the bottom layer while keeping its second color aligned with the proper center.

The white corners come next. You now have a white cross, and you need to fill in the four corner spaces around it. Each white corner has three colors. For example, one corner might have white, blue, and red. This corner must be positioned at the intersection of the white, blue, and red faces. To place a corner, first locate it on the cube. If it's on the top layer, rotate the top until the corner sits directly above its target position, then use a simple three-move rotation to drop it into place. The basic corner insertion move is: R U R' U', which means: turn right face clockwise, turn top clockwise, turn right face counterclockwise, turn top counterclockwise.

A common beginner challenge occurs when a corner is already in the first layer but in the wrong position or orientation. The solution is to push it out to the top layer first, then re-insert it correctly. Repeat the corner insertion move until all four white corners are solved. At this point, the entire white layer and first ring of side colors form a complete, solved section.

Practical takeaway: The white cross and first layer typically take 30 seconds to 2 minutes for beginners once practiced. These stages require minimal memorization and build problem-solving intuition. Practice this section until you can do it smoothly without hesitation, because this foundation determines your success with the remaining layers.

Solving the Middle Layer

Once your white layer is complete, the cube now has two complete layers to protect. The middle layer consists of four edge pieces that don't contain white or yellow. These pieces need to be positioned between the first and third layers, with both of their colors matching adjacent center pieces. This stage introduces the first "algorithm" or memorized sequence that many beginners must learn.

Learn About Maryland Tax Refunds →

To solve the middle layer, look for edge pieces on the top (yellow) layer that need to go into the middle section. Position these edges one at a time. Each edge has two colors. For example, a red-green edge must be positioned between the red and green center faces. Hold the cube so the target location faces you, with the edge's matching color on the front center. Use the left insert algorithm (L' U' L U) or right insert algorithm (R U R' U') to maneuver the piece into place.

The process works like this: if you need to insert a red-green edge and red faces you, position the edge so green is on top, then perform the appropriate algorithm. The algorithm temporarily lifts the edge piece, moves it to the side, rotates it into the middle layer, and locks it into place. If the edge gets inserted upside-down (colors reversed), simply push it back out and re-insert it oriented correctly. There are different algorithms for left versus right insertion, but they follow the same logical pattern.

What makes this stage manageable is that you only need to learn two four-move sequences. Many beginners can perform these sequences after just a few minutes of practice. However, because the top layer is now your work area and these pieces move around as you solve, you need to be careful not to disturb them permanently. Each piece you insert should stay inserted, allowing you to work systematically around the cube until all four middle-layer edges are positioned.

Practical takeaway: The middle layer typically requires 1-2 minutes for practiced beginners. This is often where people first experience the satisfaction of seeing multiple complete layers. The key is patience: if a piece doesn't fit right the first time, don't force it. Instead, follow the algorithm precisely and trust the mathematics of the cube design to position pieces correctly.