Free Guide to Removing Stripped Screws

Understanding Why Screws Strip and When It Happens

Stripped screws are one of the most common problems people face when working with tools and hardware. A stripped screw loses its grip because the threads—the spiral grooves that help the screw hold tight—become damaged or worn down. This happens in several ways, and understanding the causes can help you prevent the problem in the future.

Get Your Free Auto Repair Savings Options Guide →

The most common reason screws strip is when you turn them too forcefully. When you apply excessive rotational force, the threads inside the hole or in the screw itself can break or become deformed. This is especially likely with softer materials like plastic, wood, and aluminum, which cannot withstand the same pressure as steel or harder metals. Studies on tool use show that approximately 30% of stripped screw problems occur during initial installation due to over-tightening, while another 40% happen when trying to remove a stuck screw.

Screws can also strip if you use the wrong size driver tool. Using a Phillips head driver on a square head screw, or vice versa, causes the tool to slip and damage the screw head. This is called "cam-out," and it's one of the leading causes of stripped screws. The tool spins in the screw head rather than gripping it properly, wearing away the connection point.

Material compatibility matters too. Driving a hardened steel screw into soft wood requires a different approach than driving it into plastic. The wood can compress and shift, allowing the screw to loosen. Likewise, moisture can cause wood to swell and then shrink, creating gaps that make screws loose over time.

Understanding these causes helps you recognize when a screw is becoming stripped before it's completely unusable. Listen for a grinding or crunching sound when turning a screw—this is often a sign that the threads are breaking. Takeaway: Use the correct driver size for your screw type, apply steady pressure rather than excessive force, and work slowly when installing new screws in soft materials.

Methods for Removing Stripped Screws from Wood

Removing a stripped screw from wood presents unique challenges because wood is soft and can be damaged easily. The methods you choose depend on how badly the screw is stripped and whether you need to preserve the hole for future use.

Learn About Tenant Rights and Rental Protections →

The rubber band method works well for screws that are only slightly stripped. Place a wide rubber band over the stripped screw head and press your screwdriver firmly through the rubber band into the screw. The rubber fills the gaps between the driver and the screw head, creating enough friction to turn the screw. This method succeeds about 60% of the time for minor stripping and takes only a few minutes. You'll need a standard rubber band and your regular screwdriver.

Using a screw extractor is one of the most reliable approaches for moderately to severely stripped screws. A screw extractor is a special tool with reverse threads that you insert into the screw head. As you turn it counterclockwise, the reverse threads bite into the screw and pull it out. Screw extractors come in different sizes to match various screw diameters. They're inexpensive (typically $5-15 for a single extractor or $15-30 for a kit) and widely available at hardware stores. This method works for both wood and metal.

You can also drill out a stripped screw. Use a drill bit slightly smaller than the screw's diameter and carefully drill straight down through the center of the screw. Once you've drilled far enough, the screw head separates from the shaft, and you can remove both pieces with pliers. This method works but destroys the screw and potentially damages the surrounding wood if you're not careful.

For screws that are completely stuck, applying penetrating oil like WD-40 or similar products can help. Spray it around the screw head and let it soak for 15-30 minutes before attempting removal. The oil reduces friction and can make the screw easier to turn. Takeaway: Start with the rubber band method for minor stripping, move to screw extractors for moderate damage, and save the drilling method for when other approaches have failed.

Removing Stripped Screws from Metal and Plastic

Removing stripped screws from metal and plastic surfaces requires different techniques than wood because these materials are harder and less forgiving. Metal is denser and resists damage, but screws can become stuck due to corrosion or rust. Plastic can crack or break if you apply too much force.

Get Your Free Repair vs Replacement Guide →

For metal surfaces, heat can be your friend. If the stripped screw is metal and has been in place for years, it may have corroded or fused slightly to the metal around it. Heating the area with a heat gun or small torch for 30-60 seconds can expand the metal and break that corrosion bond. Once heated, try removing the screw immediately while it's still warm. This method works particularly well on automotive applications and appliances. Always allow the metal to cool before touching it, and wear heat-resistant gloves.

Impact drivers are specialized tools that deliver rotational force in short, powerful bursts rather than continuous turning. When a regular screwdriver fails to turn a stripped screw, an impact driver often succeeds because the rapid impacts can shock the screw loose. Impact drivers are commonly available ($30-100 for basic models) and are useful for many other tasks beyond screw removal.

For plastic surfaces, you must work gently to avoid cracking. The rubber band method works on plastic as well as wood. If that fails, try using a slightly larger screwdriver bit with firm downward pressure to create a tighter fit. Locking pliers can grip the exposed screw head if it protrudes above the surface, allowing you to turn and remove it without needing the driver to engage the screw head itself.

Superglue can work on severely stripped screws in plastic. Apply a small amount of superglue to your screwdriver bit, press it into the stripped screw head, and hold it steady while the glue hardens (typically 30-60 seconds). Once dry, the glue bonds your driver to the screw, giving you something to grip. You may only get one attempt with this method, as the bond will break if it fails to turn the screw. Takeaway: Use heat for corroded metal screws, impact drivers for stuck fasteners, and gentle pressure with modified grip techniques for plastic to avoid surface damage.

Using Specialized Tools and Equipment

Several specialized tools exist specifically for removing stripped screws, and having the right tool for the job significantly increases your chances of success without damaging the surrounding material.

Get Your Free Atlanta Luxury Car Rental Guide →

Screw extractors come in multiple types. The most common is the spiral extractor, which looks like a drill bit with reverse threads. You drill a small hole into the center of the stripped screw, insert the extractor, and turn counterclockwise. The extractor's reverse threads grab the screw material and remove it. Spiral extractors work well for screws of various sizes and come in kits containing multiple sizes. A basic kit of 4-6 extractors costs $10-20.

Left-handed drill bits offer another approach. A left-handed drill bit spins in reverse and can sometimes catch and remove a stripped screw without needing a separate extractor. As you drill with a left-handed bit, the spinning action may grip the screw enough to pull it out. This method works best for screws that aren't completely stripped. Left-handed drill bits are uncommon in most toolboxes but are available online and at specialty tool retailers for $5-10 each.

Pliers and locking pliers can grip the exposed head of a stripped screw if enough of it protrudes above the surface. Vise-grips or locking pliers create a very tight grip that allows you to turn the screw by the pliers rather than relying on the driver engagement. This method works well for larger screws and those with significant head exposure.

Drill-out kits specifically designed for screw removal combine a drill bit of the correct size with guides to help you drill straight. These kits reduce the risk of damaging surrounding material by keeping your drill bit centered. They typically cost $15-40 depending on the quality and number of included bits.

You can also create a makeshift extractor by notching the top of a stripped screw head with a rotary tool or hacksaw, creating a slot for a flat-head screwdriver to grip. This takes patience but works when other methods have failed. Takeaway: