Free Guide to Honda Tire Pressure Sensor Reset
Understanding Your Honda's Tire Pressure Monitoring System
Your Honda's Tire Pressure Monitoring System (TPMS) is a safety feature that tracks the air pressure in all four tires. The system uses sensors mounted on each wheel to measure pressure continuously. When tire pressure drops below or rises above recommended levels, the system alerts you by illuminating a warning light on your dashboard. This light typically appears as a horseshoe shape with an exclamation mark inside.
Get Your Free Atlanta Transportation Hubs Navigation Guide →
Honda introduced TPMS on most vehicles starting around 2007, though it became mandatory on all new vehicles in the United States in 2008. The system works by transmitting pressure data wirelessly from each tire sensor to your vehicle's onboard computer. Each sensor contains a battery that typically lasts between 5 to 10 years, depending on driving conditions and sensor type.
The TPMS warning light serves an important function. According to the National Highway Traffic Safety Administration, proper tire pressure improves fuel economy by up to 3 percent and extends tire life. Additionally, underinflated tires generate excessive heat, which can lead to blowouts. Overinflated tires reduce traction and can cause uneven wear patterns, compromising safety on wet or slippery roads.
Honda vehicles typically use one of two TPMS technologies: direct systems or indirect systems. Direct TPMS uses individual sensors in each tire to measure actual pressure. Indirect TPMS calculates tire pressure by monitoring wheel speed using existing antilock braking system sensors. Understanding which system your Honda has matters when determining how to reset the sensors properly.
Practical takeaway: Check your owner's manual to identify whether your Honda uses direct or indirect TPMS. This information determines which reset procedure you'll follow and what tools you may need. You can also identify the system type by looking at your dashboard—direct systems typically display individual tire pressures, while indirect systems show only a warning light.
When and Why You Need to Reset Your TPMS
TPMS resets become necessary in several common situations. The most frequent reason is seasonal tire changes. When you switch from summer to winter tires or vice versa, the new tires have different sensors (or different pressure readings if using the same tires). The vehicle's computer doesn't recognize the new sensor signals until you reset the system. Without resetting, your TPMS light may remain illuminated even if tire pressures are correct.
Learn About EDD Unemployment Phone Support Options →
Tire pressure changes naturally with temperature. For every 10-degree Fahrenheit drop in ambient temperature, tire pressure decreases by approximately 1 pound per square inch (PSI). This explains why many Honda owners notice their TPMS light turning on during fall and winter months. Conversely, hot weather can increase tire pressure. Resetting the system after checking and adjusting tire pressures helps clear false warnings triggered by seasonal temperature swings.
Other situations requiring TPMS reset include replacing a faulty sensor, rotating tires, or after battery disconnection during maintenance work. Some Honda models reset automatically after driving at speeds above 50 mph for about 10 minutes with properly inflated tires. However, many models require a manual reset procedure using your vehicle's settings menu or a specialized diagnostic tool.
The TPMS warning light indicates that your vehicle has detected a pressure problem, but resetting differs from simply turning off the light. Resetting tells your Honda's computer to re-learn the current tire pressure baseline and recalibrate its monitoring. If you reset without first correcting actual pressure problems, the light will return once the system detects the continued discrepancy.
Practical takeaway: Always check and adjust your tire pressures to the manufacturer's recommended levels (found on the driver's door jamb sticker or owner's manual, not the tire sidewall) before attempting any TPMS reset. This prevents the warning light from immediately reappearing after you complete the reset process.
Manual TPMS Reset Using Your Honda's Dashboard Controls
Many newer Honda models allow manual TPMS reset through the instrument cluster menu system without requiring special tools. The process typically involves accessing your vehicle's settings menu using steering wheel controls or the center console touchscreen. Start by turning your ignition to the "On" position without starting the engine. Then locate the Menu or Settings button on your steering wheel.
Learn About Arizona Unemployment Claims Guide →
On most Honda models from 2015 onward, navigate to Vehicle Settings or Maintenance Settings using the arrow buttons. Look for an option labeled "TPMS Reset" or "Tire Pressure Reset." Once selected, you'll typically see a prompt asking you to confirm. Select "Yes" or "Start" to begin the reset sequence. Your dashboard may display a message indicating that the system is learning new tire pressures.
During the reset sequence, you may be asked to drive your vehicle at moderate speeds for a specified time, usually 10 to 20 minutes. Keep your speed above 50 mph and maintain steady driving conditions. Some Honda models complete the reset while parked, while others require driving to complete sensor re-learning. Avoid sudden acceleration or aggressive braking during this period, as erratic driving can interfere with sensor calibration.
For older Honda models (2007-2014), the reset procedure may differ slightly. Some require you to press and hold the TPMS reset button (a small button located beneath the steering wheel or inside the glove compartment) for approximately 3 seconds until the TPMS light blinks. Then release the button and start your vehicle. Drive above 50 mph for about 10 minutes, allowing the sensors to recalibrate. On some models, you may need to repeat this process multiple times if the light doesn't clear on the first attempt.
Practical takeaway: Consult your specific Honda owner's manual before attempting a dashboard reset, as the exact procedure varies by model year and generation. Write down the steps or take a photo of the manual instructions to reference during the reset process. If your vehicle's menu system doesn't display a TPMS reset option, your model may require alternative reset methods.
Using the TPMS Reset Button Method
Honda vehicles equipped with a dedicated TPMS reset button provide a straightforward alternative to dashboard menu navigation. This button is usually located on the driver's side dashboard near the steering wheel column, beneath the steering wheel, or sometimes inside the glove compartment. Consult your owner's manual if you cannot locate it—the button is typically small and may be labeled "TPMS" or sometimes just appear as an unlabeled button in the location described.
Get Your Free Patty Pan Squash Cooking Guide →
To use the reset button method, first ensure your vehicle is turned off and all four tires are inflated to the correct pressure levels. Turn your ignition to the "On" position (one click forward without starting the engine). Locate and press the TPMS reset button. You should hold it down for approximately 3 to 5 seconds. You'll typically see the TPMS light on your dashboard blink or flash, indicating that the system has registered your request to reset.
Release the button after the light blinks. Now you need to allow the sensors to re-calibrate by driving your vehicle. Start your engine and drive at speeds above 50 mph for approximately 10 to 20 minutes. Maintain steady, moderate driving—you don't need to drive aggressively. The sensors will transmit their current pressure readings to your vehicle's computer during this driving period, establishing a new baseline pressure reference.
If the TPMS light remains illuminated after completing this process, it may indicate a faulty sensor, a punctured tire, or a system communication error. You may need to repeat the reset procedure, as some Honda models require multiple reset cycles. If the light persists after two or three reset attempts, this suggests a hardware problem rather than a calibration issue, and professional diagnostic service becomes necessary.
Practical takeaway: Keep a record of your Honda's recommended tire pressure (found on the driver's door jamb label) in your phone or vehicle documents. Check pressures with a reliable tire gauge before each reset attempt. Accurate baseline pressures are essential—if even one tire is significantly over or under-inflated during the reset, the system may not calibrate correctly.
Tire Pressure Specifications and Maintenance Before Resetting
Before initiating any TPMS reset, you must establish what correct tire pressure means for your specific Honda model. The manufacturer's recommended pressure is not printed on the tire sidewall—that number indicates the tire's maximum safe pressure, which is different. Instead, find your Honda's specifications on a label
This guide is for general information only and is not medical, financial, legal, or other professional advice. For decisions specific to your situation, consult a qualified professional. See our Editorial Policy.