Free Guide to Home Radon Testing Options

Understanding Radon and Why Testing Matters

Radon is a colorless, odorless radioactive gas that occurs naturally in the soil and rock beneath homes. It forms when uranium in the ground breaks down over time. The U.S. Environmental Protection Agency (EPA) estimates that radon causes approximately 21,000 deaths per year in the United States, making it the second leading cause of lung cancer after smoking. Despite these risks, many homeowners remain unaware of radon's presence in their homes because you cannot see, smell, or taste it.

Get Your Free Guide to Mite Control at Home →

Radon enters homes through cracks in foundations, gaps around pipes, unsealed sump pump openings, and other openings where the house meets the ground. The gas can accumulate in basements and lower levels where it becomes concentrated over time. Different regions of the country have varying radon levels due to geological differences. The EPA's radon map shows that radon potential varies significantly by location, with some areas experiencing much higher concentrations than others.

Testing is the only way to know if radon is present in your home. The EPA recommends that all homes be tested for radon, regardless of location. Even homes in areas with lower average radon levels can have elevated readings. The EPA considers 4 picocuries per liter (pCi/L) as the action level—the point at which the EPA suggests considering radon reduction measures. However, any radon exposure carries some risk, and some experts recommend taking action at lower levels.

Understanding radon's presence in your home is important for long-term health decisions. Whether you're buying a new home, concerned about your current residence, or simply want baseline information about indoor air quality, testing provides concrete data about conditions in your specific property. This guide covers the various testing methods available and how each works.

Practical takeaway: Before selecting a testing method, understand that radon detection requires actual testing—no other method provides accurate information about whether radon is present in your home.

Short-Term Radon Testing Methods and How They Work

Short-term radon tests measure radon levels over a period of 2 to 90 days, with most tests running between 2 and 7 days. These tests provide a snapshot of radon concentration during the testing period. The EPA recommends taking short-term tests in the lowest lived-in level of the home, typically the basement or a ground-floor room where people spend significant time.

Learn About Getting Your House Valued →

Charcoal canister tests are among the most common and affordable short-term options. These devices contain activated charcoal that absorbs radon gas. You place the canister in your home for the designated period—usually 2 to 7 days—then seal it and mail it to a laboratory for analysis. The lab measures how much radon was absorbed and calculates the average concentration in your home. Charcoal canisters typically cost between $15 and $30 and are widely available through hardware stores, online retailers, and the EPA's radon contact database. One limitation is that charcoal canisters perform less accurately in high humidity conditions above 75 percent, so timing the test for drier months may improve reliability.

Electret ion chamber detectors work differently by using a charged electret that collects radon decay products. As radon breaks down, it produces radioactive particles that interact with the charged surface. After the test period, you return the detector to the lab, where technicians measure the electrical charge to determine radon concentration. These detectors work well in humid conditions and are less affected by moisture than charcoal canisters. Electret detectors typically cost $25 to $45 per test and provide results within one to two weeks of receipt at the laboratory.

Continuous radon monitors are electronic devices that provide real-time radon measurements throughout the testing period. These devices display hourly readings, allowing you to see how radon levels fluctuate over time. Some models can be connected to a computer or smartphone to track data. Continuous monitors cost more upfront—typically $800 to $2,500 to purchase—but provide detailed information. If you're renting equipment for a short test, rental costs range from $50 to $100 per week. These devices are particularly useful for understanding how radon levels change in response to weather, ventilation, and seasonal variations.

Choosing a short-term test depends on your budget, timeline, and desired detail level. If cost is the primary concern, charcoal canisters offer an economical option. If you want more detailed information or are testing in humid conditions, electret detectors or continuous monitors may provide better data. The key consideration is that short-term tests capture conditions during the testing window only and may not reflect year-round averages.

Practical takeaway: Short-term tests work best when placed in your lowest lived-in level for the full recommended duration, away from doors, windows, and exterior walls where radon entry points may skew results.

Long-Term Radon Testing for Year-Round Data

Long-term radon tests measure radon exposure over periods of 91 days to one year, providing a more representative picture of average radon levels throughout different seasons. Because radon levels naturally vary with temperature, humidity, barometric pressure, and ventilation patterns, a longer testing period captures these fluctuations. The EPA particularly recommends long-term testing as the basis for making decisions about radon mitigation, since it accounts for seasonal variations that short-term tests may miss.

Get Your Free Harry Potter House Quiz Guide →

Alpha track detectors are the most common type of long-term radon test. These small, inexpensive plastic devices contain a special material that records tracks created by alpha particles emitted as radon decays. You place the detector in your home for the test period—typically 3 months to one year—then mail it to a laboratory. Technicians examine the material under a microscope to count the alpha tracks and calculate average radon concentration. Alpha track detectors cost between $20 and $35 per test, making them among the most affordable long-term options. Results typically come back within one to two weeks of laboratory receipt.

Electret ion chamber detectors also come in long-term versions that function similarly to short-term models but are read after 91 days or longer. Like their short-term counterparts, these detectors use charged electrets to measure radon decay products. Long-term electret detectors cost approximately $30 to $50 each and provide accurate results regardless of humidity levels. Some electret detectors can be re-read multiple times, allowing you to track radon levels at different points during the testing year without waiting until the test concludes.

Continuous monitors can also be used for long-term monitoring by collecting and storing data over extended periods. While the upfront cost is higher than passive detectors, using a monitor for three to twelve months spreads the daily cost significantly. Long-term continuous monitoring provides the most detailed picture of radon fluctuations, showing how levels change with seasons, weather patterns, and home usage. If purchasing equipment is not practical, some laboratories and radon professionals rent long-term monitors for $150 to $300 per month.

Liquid scintillation vials represent another long-term option. These small devices contain a chemical solution that glows when exposed to radon. After the testing period, you mail the vial to a laboratory where technicians measure the glow intensity to calculate radon concentration. Liquid scintillation vials typically cost $20 to $30 and work well in most home conditions. One advantage is their small size, making them easy to place inconspicuously in living spaces.

The primary advantage of long-term testing is reliability. A year-long test that captures all four seasons provides the most accurate representation of your home's actual radon exposure. This information supports better decision-making about whether radon reduction measures are necessary. The main disadvantage is the longer wait for results—you won't know the outcome for several months after testing begins.

Practical takeaway: Long-term testing works best when left undisturbed in your lowest lived-in level for the entire test duration, providing seasonal context that short-term tests cannot offer.

DIY Testing Options and What to Expect

Many homeowners choose to conduct radon testing themselves using mail-in test kits rather than hiring professionals. DIY testing offers several advantages: lower cost, convenience, and the ability to test on your own schedule without arranging appointments. For homeowners seeking baseline information about radon in their homes, DIY testing provides legitimate data, though proper placement and handling are essential for accuracy.

How to Make Roasted Broccoli at Home →