Free Guide to Drawing Human Faces and Proportions

Understanding Basic Human Face Proportions

Learning to draw faces begins with understanding how facial features relate to one another. The human face follows consistent proportional patterns that artists have studied for centuries. These patterns serve as a foundation for realistic figure drawing, though individual faces vary within these guidelines.

Get Your Free AARP Membership Cost Information Guide →

The average adult face is approximately as wide as it is tall when measured from the top of the head to the bottom of the chin. Dividing the face into equal sections helps establish where features should be placed. The horizontal line that divides the face in half falls roughly at the eyes, not higher on the forehead as many beginners assume. This means the distance from the top of the head to the eyes equals the distance from the eyes to the chin.

The width of the face at eye level is typically about five eye-widths across. Each eye occupies approximately one eye-width of space, with one eye-width of space between the two eyes, and one eye-width of space on each side between the eye and the edge of the face. This five-eye-width measurement provides a reliable guide for spacing facial features horizontally.

Vertical spacing also follows predictable patterns. The distance from the eyes to the bottom of the nose is roughly one-third of the distance from the eyes to the chin. The ears typically span from the level of the eyebrows to the level of the nose tip. Understanding these proportional relationships allows artists to construct faces that look balanced and anatomically sound, even when drawing from imagination rather than observation.

Practical takeaway: Lightly sketch horizontal and vertical guidelines dividing your paper into sections. Use the five-eye-width measurement horizontally and the eye-level midpoint vertically. These reference lines remain invisible in your finished drawing but provide crucial accuracy during construction.

Constructing the Head Shape and Facial Structure

Before adding individual features, establishing the overall head shape creates a solid foundation for facial drawing. The human head is not a perfect sphere or oval, but rather a combination of geometric forms that work together to create the characteristic shape we recognize.

Get Your Free Kindle Reading Guide →

Most artists begin with a simple circle or oval to represent the cranium, the upper portion of the skull containing the brain. Below this, the lower jaw forms an angular shape that tapers to a point at the chin. The width of the lower jaw is typically narrower than the cranium width in most adult faces, though this varies by individual. The jawline angles upward from below the ears toward the chin, creating the characteristic jaw contour.

The face can be further divided into three major planes: the frontal plane (facing forward), and two side planes (the temple areas). Understanding these planes helps with shading and gives the head three-dimensional form. The cheekbone structure sits beneath the eye area and extends toward the ears, creating subtle contours that affect how light and shadow fall across the face.

The center line of the face, running vertically down the middle from forehead to chin, serves as an important reference for symmetry. Most faces are roughly symmetrical, though perfectly symmetrical faces actually appear less natural than faces with minor asymmetries. This center line helps ensure that features on both sides of the face relate correctly to one another and maintain proper alignment.

The neck connects the head to the shoulders and should be considered as part of the overall drawing. The neck is wider than many beginners expect and angles slightly backward from the jaw. The sternocleidomastoid muscles visible on the sides of the neck create distinct contours, especially when the head turns or tilts.

Practical takeaway: Sketch the basic head shape using simple geometric forms. Draw the center line and horizontal guidelines, then place the jawline and neck. This structural foundation takes only minutes but dramatically improves the accuracy of features you add afterward.

Placing and Drawing Eyes Correctly

The eyes are often considered the most expressive feature of the face and demand careful attention during drawing. Eyes sit at the horizontal midpoint of the face, a critical measurement many beginning artists miss. Placing the eyes too high is one of the most common proportional errors in figure drawing.

Get Your Free TikTok Creator Setup Guide →

Each eye is roughly almond-shaped, though the exact shape varies widely among different individuals. The outer corner of the eye typically sits slightly higher than the inner corner, creating a subtle angle that slopes upward. The pupil and iris sit within the white of the eye, typically positioned slightly toward the inner corner of the eye socket rather than centered.

The upper eyelid creates a curved line that follows the contour of the eyeball beneath it. The lower eyelid appears thinner and more delicate than the upper lid. Between the upper and lower lids sits the visible portion of the eyeball, though this amount varies based on whether the person has wide-set or narrow-set eyes, and their individual eye shape. Most people show a small crescent of white between the lower eyelid and the iris when looking straight ahead.

Eyebrows sit above the eye, typically following the natural bone structure of the brow ridge. The inner end of the eyebrow aligns roughly with the inner corner of the eye, while the outer end extends beyond the outer corner of the eye. Eyebrow thickness, arch height, and color vary tremendously among individuals, making eyebrows one of the most characteristic features for conveying individual identity.

Eyelashes extend from both the upper and lower lids, though upper lashes are typically longer and more noticeable. Rather than drawing individual lashes as separate lines, a more natural approach involves suggesting lash clusters along the lid line with small strokes. Highlights in the eyes—typically small white dots where light reflects off the glossy eyeball surface—add crucial life and dimension to the drawing.

Practical takeaway: Practice drawing eyes at different angles and expressions using the midline measurement as your reference point. Spend time observing how light creates highlights and shadows in the eye area, noting that shadows typically appear darker in the inner corner where the eye recedes.

Drawing the Nose, Mouth, and Facial Features

The nose is perhaps the most variable facial feature in terms of size, shape, and proportion. Rather than drawing the entire nose as a solid form, more experienced artists suggest indicating the nose's structure through careful placement of shadows and highlights, with the bridge and septum (center line) drawn lightly.

Get Your Free Guide to Social Security at 62 →

The nose extends from between the eyebrows down to a point roughly one-third of the way from the eyes to the chin. The width of the nose at its widest point (the nostrils) is typically similar to the distance between the inner corners of the eyes. The nose has several distinct planes: the bridge running down the center, the two side planes, and the tip. Nostrils appear as two small openings at the base of the nose, often rendered as subtle shadows rather than obvious holes.

The mouth occupies the lower third of the face, with the center line of the lips typically at roughly two-thirds the distance from the eyes to the chin. The mouth is composed of the upper lip, lower lip, and the line where they meet. The upper lip typically appears shorter and narrower than the lower lip. The shape of the mouth varies tremendously, but the upper lip often has a subtle M-shape at the center where the two sides of the lip meet, while the lower lip appears more rounded.

The corners of the mouth typically align with a vertical line drawn through the center of each eye, though this varies by individual. When smiling, the mouth widens and the cheeks lift, creating small folds at the outer corners of the eyes and deepening the cheek contours. The teeth are not usually drawn as individual units but rather as a single tone or value with subtle line work indicating the gaps between teeth.

Ears sit on the sides of the head, their tops roughly aligned with the eyebrows and their lobes reaching approximately the level of the nose tip. The ear is composed of several curved forms including the helix (outer curved edge), the tragus (the small projection covering the ear canal), and the concha (the inner curved area). Most of the ear's dimension comes from understanding these curved forms rather than from outlining the ear's overall shape.

Practical takeaway: Study the nose, mouth, and ears by observing photographs from multiple angles. Notice how the nose's shadow on one side creates its three-dimensional form without requiring an obvious outline. Practice rendering mouths in different expressions—smiling, neutral, and open—to understand how surrounding facial muscles affect these features.

Understanding Light, Shadow, and Facial Dimension

Proportional accuracy creates the foundation

How to Start a Tow Truck Business Guide →