Free Guide to Drawing Heads for Beginners

Understanding Basic Head Proportions and Structure

Learning to draw heads begins with understanding the underlying structure that all human heads share. The human head follows consistent proportions that artists have studied for centuries. When you look at a head from the front, it is roughly oval or egg-shaped, with the wider portion at the top and a narrower section at the bottom where the chin is located.

Get Your Free Microsoft Outlook Update Guide →

The front-facing head can be divided into equal sections using horizontal lines. A common method divides the head into thirds: the upper third contains the top of the head to the eyebrows, the middle third spans from the eyebrows to the bottom of the nose, and the lower third goes from the nose to the chin. The eyes themselves sit approximately halfway down the head's height, which surprises many beginning artists who assume eyes are higher on the face.

Another important measurement involves the width of the head. The width of one eye typically equals the distance from the inner corner of one eye to the inner corner of the other eye. This same width also roughly matches the space from the outer corner of one eye to the edge of the head on that side. These proportions remain relatively consistent across different ages and ethnicities, though variations do occur.

The jaw structure extends from below the ears and tapers toward the chin. The ears themselves sit between the eyebrow line and the bottom of the nose. Understanding where these features land helps you place them correctly before adding details. Many beginners draw ears too high or too far back, so marking their position early prevents this common mistake.

Practical takeaway: Before drawing any facial features, lightly sketch two perpendicular lines crossing through the center of your oval head shape—one vertical and one horizontal. The horizontal line marks where the eyes go. Use this grid to position all other features relative to these reference points, ensuring balanced proportions from the start.

Mapping Out Facial Features and Their Placement

Once you have established the basic head structure, you can begin locating where individual facial features belong. Each feature has a specific relationship to the head's overall proportions, and understanding these relationships creates more realistic drawings. The placement of features is as important as the features themselves.

Get Your Free Guide to Top Seafood Restaurants Across America →

The eyes deserve special attention because they form a crucial part of facial expression and character. As mentioned, they sit approximately at the midpoint of the head's height. Each eye is roughly one eye-width wide. Between the two eyes sits a space equal to the width of one eye. This means if you draw a line from the outer edge of one eye to the outer edge of the other eye, you can fit two additional eye-widths in that space. The eyes are not perfectly horizontal either—they tilt slightly downward toward the nose on most faces.

The nose begins at the inner corners of the eyes and extends downward to approximately the midpoint between the eyebrows and the chin. The nose is narrower than most beginners initially draw it. The nostrils typically align with the inner edges of the eyes when viewed from the front. The bridge of the nose is a vertical plane, while the tip rounds forward, and the base widens slightly.

The mouth sits roughly one-third of the way from the nose to the chin. The corners of the mouth typically align with the center of each eye when looking at a front-facing view. The mouth is not a simple line but rather a three-dimensional form with thickness and volume. The upper lip catches light differently than the lower lip because of how it angles. Beginners often draw lips too thin or too wide, so observing how lips relate to the eye width helps with accuracy.

The eyebrows sit just above the eyes and follow the shape of the eye socket beneath them. They are not perfectly horizontal but rather arch slightly as they move from the inner portion of the face toward the temples. The inner portion of the eyebrow sits directly above the inner corner of the eye.

Practical takeaway: Draw the head structure and center lines, then use light construction lines extending from key points. Draw a horizontal line from the inner corner of each eye across the face to mark the mouth position. Use vertical lines from the eye centers to locate mouth corners. This methodical approach prevents features from appearing misaligned or awkwardly placed in your final drawing.

Drawing Eyes With Expression and Depth

The eyes are often called the windows to the soul in portraiture, and they deserve careful study. Eyes have multiple components: the eyeball itself, the iris, the pupil, the whites of the eye, the eyelids, and the surrounding muscles and skin. Each part contributes to how expressive and three-dimensional the eye appears.

Get Your Free Whirlpool Dishwasher Operating Guide →

The eyeball is a sphere sitting in the eye socket. The iris is a circular colored part of the eye, and the pupil is the black circle at its center. The pupil is usually slightly off-center within the iris, sitting slightly toward the upper inner portion. The white of the eye, called the sclera, is not actually pure white but contains subtle warm and cool tones. A small white highlight on the pupil creates the illusion that light is reflecting off a wet, living eye—this single mark transforms a flat eye drawing into something that appears alive.

The eyelids are crucial for expression. The upper eyelid is thicker and more visible than the lower eyelid on most faces. The upper eyelid casts a shadow over the top portion of the iris and pupil. The lower eyelid is typically a thinner line. The space between the eyelids is not uniform—it is wider at the inner corner and narrower at the outer corner. When the eyes look straight ahead, a tiny bit of white shows between the upper eyelid and the iris at the top, and between the iris and the lower eyelid at the bottom.

Eye shape varies significantly among individuals and across different ethnicities. Some eyes are round, others are almond-shaped, and some have a more hooded appearance. The outer corner of the eye can tilt upward or downward. These variations in eye shape dramatically affect the overall character of your portrait. Studying photographs and real people helps you understand the range of eye shapes rather than defaulting to one generic eye shape for every face.

The muscles surrounding the eyes create wrinkles and shadows that add age and character. Crow's feet extend from the outer corners of the eyes. The tear duct area at the inner corner has a slightly reddish tone. The area below the eye can have shadows suggesting the cheekbone structure beneath.

Practical takeaway: Practice drawing eyes in isolation before placing them on full heads. Draw the basic eye shape, then add the iris and pupil slightly off-center. Shade the upper eyelid to show it casts shadow on the eye. Add a small white highlight on the pupil and a tiny white reflection on the iris edge. These three elements—upper lid shadow, highlight on pupil, and iris reflection—transform a basic eye into a living, expressive feature.

Creating Realistic Noses and Mouth Shapes

The nose and mouth work together to convey emotion, age, and character. Unlike the eyes, which benefit from bold definition, the nose and mouth are often most convincing when rendered with subtlety. Many beginning artists over-define these features, making them appear cartoonish rather than realistic.

Get Your Free 403(b) Borrowing Options Guide →

The nose is primarily defined by shadow and light rather than outline. The bridge of the nose receives light from above and casts a subtle shadow on either side. The tip of the nose is rounded and projects forward, creating a shadow underneath. The nostrils are small openings, and the area around them has the most pronounced shadow on the nose. Rather than drawing the nose outline in a dark line, skilled artists suggest the nose shape using shading and value changes. The underside of the nose where it meets the face is often the darkest part.

Nose shapes vary tremendously. Some noses are small and delicate, while others are larger and more prominent. The bridge can be straight, curved, or irregular. The tip can be pointed, rounded, or bulbous. The nostrils can be flared or narrow. These variations are important to observe in your reference material. A nose that works well for one face will look wrong on another.

The mouth is a complex three-dimensional form. The lips have a distinct structure with a peak in the center of the upper lip called the philtrum. The lower lip is typically fuller than the upper lip. The mouth has volume and thickness—the lips extend outward from the face rather than sitting flat against it. The division line between the lips is not one continuous line but rather follows the contour of the upper and lower lips where they meet.

Lips contain multiple values and tones. The edges of