Free Guide to Cleaning Your Washing Machine With Vinegar

Why Vinegar Works to Clean Washing Machines

Vinegar is an effective cleaning agent for washing machines because of its natural chemical properties. White vinegar contains acetic acid, which has a concentration of about 4-8% depending on the brand. This acetic acid breaks down mineral deposits, soap scum, and mold that accumulate inside washing machine drums and pipes over time.

Learn About Apple ID Security and Features →

When you run a washing machine regularly, residue builds up from detergent, fabric softener, dirt particles, and minerals in hard water. This buildup creates an environment where bacteria and mold can grow, which can cause unpleasant odors and reduce the machine's performance. The acetic acid in vinegar dissolves these deposits without requiring harsh chemicals or abrasive scrubbing.

Unlike commercial cleaning products, vinegar is non-toxic and biodegradable. It breaks down into water and carbon dioxide after use, making it safe for your plumbing system and the environment. The cost is also significantly lower than specialized washing machine cleaners—a gallon of white vinegar typically costs between $2 and $4, while commercial cleaning products can range from $5 to $15 per bottle.

Studies on vinegar's antimicrobial properties show that acetic acid can reduce certain types of bacteria and mold growth. Research published in food science journals has demonstrated that vinegar solutions can kill various microorganisms that contribute to machine odors and contamination.

Practical takeaway: Use standard white vinegar with 5% acetic acid content (the most common household type) rather than specialized or cleaning vinegars, which may have different concentrations and could potentially damage machine components.

How to Clean Your Washing Machine Drum

The drum is the primary component where your clothes sit during washing cycles, and it accumulates the most buildup over time. To clean the drum effectively with vinegar, you'll need white vinegar, a cloth or sponge, and about one hour of time. Most modern washing machines, whether front-loading or top-loading models, respond well to this cleaning method.

Free Ice Maker Setup and Maintenance Guide →

For a front-loading washing machine, start by running an empty hot water cycle with two cups of vinegar poured directly into the detergent dispenser. Set the machine to the hottest water temperature and the longest cycle available. The heat and vinegar combination will loosen deposits stuck to the drum walls and seals. Once this cycle completes, use a damp cloth to wipe the visible interior of the drum, paying special attention to the rubber gasket around the door, where mold often accumulates. Repeat the vinegar cycle if the machine still shows visible residue or smells unpleasant.

For a top-loading washing machine, the process is similar but slightly different. Fill the drum with hot water, then add two to three cups of vinegar depending on your machine size. Run the longest, hottest cycle available without any clothes in the machine. The vinegar solution will agitate against the drum walls, breaking down buildup. After this cycle finishes, run a second empty hot water cycle to rinse away any remaining vinegar solution and loosened debris.

You may notice the vinegar smell during and immediately after the cleaning cycle. This is normal and will dissipate once the machine dries completely. Some people find the vinegar smell stronger in front-loading machines because of the rubber gasket design, which traps moisture and odors.

Practical takeaway: Clean your washing machine drum once per month if you have hard water or use the machine frequently, or once every three months if you have softer water and lighter use. Regular cleaning prevents buildup from accumulating to levels that require aggressive scrubbing.

Cleaning the Rubber Gasket and Seals

The rubber gasket—the flexible seal that keeps water inside front-loading machines—is particularly prone to mold and mildew growth. This component creates a dark, moist environment where organic material can accumulate. Mold in the gasket is often the source of musty smells from front-loading washers, and it can transfer to your clean clothes if not addressed.

How to Make Carne Asada Tacos at Home →

After running your vinegar cycle on the drum, the gasket should be cleaned separately for thorough results. Mix equal parts white vinegar and water in a spray bottle or bowl. Using a cloth or soft-bristled brush, spray or apply the solution generously around the rubber gasket, working into all the folds and crevices where the rubber overlaps itself. The gasket typically has several folds where debris collects.

Let the vinegar solution sit on the gasket for about 15 minutes to allow the acetic acid to break down mold and mildew. Then scrub gently with your cloth or brush, moving along the entire length of the gasket. Don't use stiff brushes or abrasive materials, as these can damage the rubber and create cracks where mold can grow more easily. Pay particular attention to the bottom of the gasket, where water and debris tend to collect.

Once you've scrubbed thoroughly, wipe the gasket with a dry cloth to remove as much moisture as possible. Leaving the rubber wet provides an ideal environment for mold to regrow quickly. For machines with particularly stubborn mold, you can repeat this process or leave the gasket exposed to air (such as by leaving the machine door open) for several hours to dry completely.

Top-loading machines don't have a rubber gasket in the same way, but they may have a rubber seal around the agitator or underneath the lid. These areas should be wiped down with the vinegar and water solution as part of your maintenance routine.

Practical takeaway: Leave your front-loading washing machine door open between uses to allow the gasket to dry completely. This single habit can significantly reduce mold growth and unpleasant odors, potentially reducing your need for deep vinegar cleaning cycles.

Cleaning the Detergent Dispenser and Other Components

Washing machines have several small components beyond the main drum that accumulate soap residue and mineral deposits. These include the detergent dispenser drawer, the bleach dispenser, fabric softener compartments, and the rinse aid dispenser in some machines. Built-up detergent in these compartments can prevent the correct amount of cleaning product from reaching your clothes and can harbor mold growth.

Your Free Michigan Marriage License Guide →

Most modern washing machines have removable detergent dispensers that can be taken out and cleaned separately. Check your machine's manual to see if your dispenser is removable. If it is, pull it out gently and rinse it under hot running water. Use an old toothbrush or small soft-bristled brush to scrub inside the grooves and channels where detergent residue hardens. For stubborn buildup, soak the dispenser in a mixture of equal parts vinegar and hot water for 30 minutes, then scrub again.

If your dispenser isn't removable, you can still clean it by filling it with undiluted white vinegar and running a short hot water cycle without any clothes in the machine. This forces the vinegar through the dispenser's internal passages, breaking down soap buildup. Follow this with a rinse cycle using plain water.

The bleach and fabric softener dispensers should be treated similarly. These compartments are often narrower and more difficult to clean than the detergent dispenser. Using a spray bottle filled with vinegar allows you to spray directly into these small openings, and then run a cycle to flush them out. For particularly narrow openings, a thin flexible bottle brush or pipe cleaner (which you can find at hardware or dollar stores) works well to reach interior buildup.

Water inlet screens or filters, if accessible, should also be checked periodically. These screens prevent debris from entering the water line, but they can become clogged with mineral deposits. If you notice weak water pressure during fill cycles, mineral buildup on the inlet screen may be the cause. These screens can often be soaked in vinegar solution to dissolve mineral deposits.

Practical takeaway: Clean detergent dispensers at least once every three to six months. Over time, hardened detergent in these compartments can reduce cleaning performance and create unpleasant smells—sometimes more effectively than addressing the drum itself.

Monthly Maintenance to Prevent Future Buildup

Regular maintenance with vinegar takes far less time and effort than dealing with heavily soiled machines that smell bad or don't clean clothes effectively. A simple monthly or quarterly maintenance routine can prevent the buildup that requires more intensive cleaning sessions.

Learn About Gemini Zodiac Sign Traits →