Free Guide to Cleaning a Green Swimming Pool

Understanding Pool Water Chemistry and Why Pools Turn Green

A green swimming pool results from algae growth in the water. Algae are tiny plants that thrive in warm water with sunlight and nutrients. When pool chlorine levels drop too low, or when the water chemistry becomes unbalanced, algae can multiply rapidly and turn your pool water from clear blue to murky green within just a few days.

Get Your Free Security License Renewal Guide →

Pool water chemistry depends on several key factors working together. Chlorine acts as the primary disinfectant, killing bacteria and algae. pH measures how acidic or basic the water is on a scale from 0 to 14, with 7 being neutral. The ideal pH for a swimming pool is between 7.2 and 7.6. Alkalinity is the water's ability to resist pH changes, and it should stay between 80 and 120 parts per million (ppm). Calcium hardness—the amount of dissolved calcium in the water—should range from 200 to 400 ppm to prevent damage to pool surfaces and equipment.

When chlorine levels fall below 1 ppm, algae can begin growing. A pool that hasn't been maintained for one or two weeks, or one exposed to heavy rain or high temperatures, becomes vulnerable. Cloudy water often appears before green water develops. This cloudiness indicates that chlorine levels are insufficient to kill all the algae and bacteria present.

Testing your water regularly prevents green pools. Test strips or liquid test kits measure chlorine, pH, and alkalinity. Most pool owners should test water at least twice weekly during warm months. A practical approach is to test your pool every Monday and Thursday morning before anyone swims.

Initial Assessment and Safety Preparation

Before cleaning a green pool, determine the severity of the algae problem. A slightly green pool with some visibility at the bottom differs greatly from a completely opaque pool where you cannot see the bottom. This assessment guides your cleaning strategy and the products you'll need.

Free Guide to Auto Repair Shop Rental Space →

Examine the pool from multiple angles during daylight hours. Look at the water color—light green indicates early-stage algae growth, while dark green or black-green shows advanced algae blooms. Check the pool floor and walls for visible algae buildup or slimy surfaces. If you can see the bottom of the pool clearly, the algae problem is mild. If visibility drops below three feet, you're dealing with moderate contamination. If you cannot see the bottom at all, the problem is severe.

Safety is critical before starting any cleaning work. Turn off automatic pool features and chlorinators. Drain or remove any pool toys, floats, and furniture. Post a sign indicating the pool is closed for cleaning and not safe for swimming. Do not allow anyone in the water during treatment.

Gather necessary supplies before beginning work. You'll need:

• Safety glasses and gloves to protect skin and eyes from chemicals
• A pool brush with stiff bristles for scrubbing surfaces
• A pool skimmer or net for removing debris from the water surface
• A pool vacuum, either manual or robotic, to clean the bottom
• Chlorine shock treatment appropriate for your pool size
• pH adjusters (pH up or pH down products)
• An alkalinity increaser if needed
• Test strips or a liquid test kit
• A bucket for mixing products when required
• Baking soda as an alternative alkalinity booster

Wear protective equipment throughout the cleaning process. Chemical burns from pool shock and chlorine are possible, so always wear gloves and glasses. Keep the pool area well-ventilated if you're using chemical treatments. A practical tip: lay out all supplies near the pool before you start, so you're not running back and forth mid-process.

Brushing and Debris Removal for Moderate Green Pools

For pools with moderate green water—where you can see at least a few feet to the bottom—begin with physical cleaning before adding chemicals. Vigorous brushing helps loosen algae from surfaces and allows chemicals to work more effectively once added.

How to Delete Your Gmail Account Guide →

Start by skimming the water surface with a pool net or skimmer basket. Remove leaves, insects, and any floating debris. This prevents debris from sinking and creating additional sediment on the pool bottom. Skim thoroughly, making multiple passes across the entire surface.

Next, brush all pool surfaces aggressively. Use a pool brush with stiff nylon or steel bristles, not soft bristles. Brush the walls by working in sections, starting at the shallow end and moving to the deep end. Apply firm pressure and use long strokes, brushing upward from bottom to top. This motion helps push algae and debris toward the center of the pool where they can settle. Spend at least 15 to 20 minutes brushing walls.

After brushing walls, brush the pool floor using the same upward motion. Pay special attention to corners and crevices where algae tends to accumulate. If your pool has steps or a shallow shelf area, brush those thoroughly as well. Algae grows particularly well on horizontal surfaces where water circulation is slower.

Once brushing is complete, let the pool sit for 30 minutes to an hour. This allows the loosened algae and debris to settle to the bottom, making the next steps more effective. During this time, you can test the water chemistry and begin planning your shock treatment.

A practical takeaway: if you maintain weekly brushing during warm months, you prevent algae from establishing itself. Many pool owners find that 10 minutes of weekly brushing prevents the need for major cleaning projects. For a green pool in its early stages, brushing alone sometimes reduces visible algae by 50 percent or more.

Shock Treatment and Chemical Balancing

Shock treatment is the core strategy for killing algae in green pools. Pool shock is a concentrated chlorine product that rapidly raises chlorine levels to kill algae, bacteria, and other contaminants. There are several types of pool shock available, each with different chemical compositions and application methods.

Free Guide to Roasting Pork at Home →

Calcium hypochlorite shock is the most common type and typically costs between $10 and $30 per bag depending on size and brand. It contains about 65 percent available chlorine and works well for most residential pools. Dichlor shock contains about 56 percent available chlorine and dissolves faster, making it useful if you want results within hours rather than overnight. Lithium hypochlorite shock is gentler on pool alkalinity but costs more. Chlorine-free shock uses other oxidizers and may be preferred if your pool has high chlorine sensitivity issues, though it's less effective against severe algae.

Calculate your pool volume in gallons before applying shock. A pool that is 15 feet long, 10 feet wide, and 5 feet deep holds approximately 5,600 gallons. Most shock products recommend dosing at 2 to 4 pounds per 10,000 gallons for routine maintenance, but a green pool typically requires double-shocking or even triple-shocking to overcome the algae bloom. This means applying 4 to 8 pounds per 10,000 gallons over 24 to 48 hours.

For a green pool, the application process works like this: Test the current chlorine level first using strips or a test kit. If chlorine reads below 2 ppm, you need significant shock treatment. Calculate the amount needed based on your pool volume and follow the product label instructions exactly. Some shocks require dissolving in a bucket of water before adding to the pool; others can be broadcast directly into the deep end. Always add shock during late evening or at night, since sunlight degrades chlorine.

After applying the initial shock treatment, wait 24 hours before retesting. Most green pools require a second shock application the following evening. During this waiting period, run your pool filter continuously without stopping. Filtration removes dead algae and debris, clearing the water. If the pool water remains green after 24 hours of filtration, apply a second dose of shock.

Adjust pH and alkalinity after shock treatment. Shock products typically raise pH temporarily, so test after 24 hours. If pH reads above 7.8, add pH decreaser according to package directions. If alkalinity is below 80 ppm, add alkalinity increaser or baking soda to bring it back into