Free Guide to Changing Your Bathroom Faucet

Understanding Your Bathroom Faucet and Why You Might Replace It

A bathroom faucet is one of the most-used fixtures in your home. According to the U.S. Environmental Protection Agency, the average person uses the bathroom sink 20 to 30 times per day. Over time, faucets can develop leaks, lose water pressure, or simply become worn out. Understanding how your faucet works is the first step toward replacing it yourself.

Get Your Free Flat Screen TV Cleaning Guide →

Most bathroom faucets fall into a few basic categories. Single-handle faucets have one lever that controls both water flow and temperature. Double-handle faucets have separate knobs for hot and cold water. Widespread faucets have two handles and a spout that are mounted separately on your sink. Centerset faucets have all components mounted close together on a single base. Wall-mounted faucets attach directly to the wall instead of the sink.

Common reasons to replace a faucet include persistent dripping (which can waste up to 3,000 gallons per year per the EPA), reduced water pressure, rust or corrosion, or simply wanting an updated look. A leaking faucet might start small, but the cost adds up quickly. Even a faucet dripping once per second can waste nearly 3,000 gallons annually, increasing your water bill significantly.

Before starting any replacement project, turn off the water supply to your bathroom. Look under your sink for shut-off valves (also called stop valves). Turn these clockwise until they stop. If you cannot find shut-off valves, you may need to shut off the main water supply to your entire house. Test that the water is truly off by turning on the faucet—no water should flow out.

Practical Takeaway: Identify your faucet type and the specific reason for replacement. This information will help you select the right replacement faucet and understand what tools and steps you'll need.

Gathering Tools and Materials You'll Need

Replacing a bathroom faucet does not require expensive or specialized equipment. Most of the tools you need may already be in your home. Gathering everything before you begin makes the process smoother and prevents frustrating trips back and forth.

How to Connect Your Bluetooth Speaker to Roku TV →

Basic tools you'll need include an adjustable wrench (helpful for loosening and tightening connections), a Phillips head screwdriver, a flathead screwdriver, and possibly a basin wrench (a specialized tool designed to reach connections under the sink). A basin wrench typically costs $10 to $20 and is worth having if you plan to do plumbing work in the future. If you don't have one, a regular wrench often works, though it may be more difficult to maneuver in tight spaces.

You'll also want to gather these materials and supplies before starting:

• Plumber's tape (also called thread seal tape or PTFE tape) - costs around $3 to $5 and prevents leaks at threaded connections
• Plumber's putty or silicone caulk - used to seal the base of the new faucet where it meets the sink
• A bucket or towel - to catch water remaining in the lines
• New faucet of your chosen type and style
• Any mounting hardware that comes with your new faucet
• Flashlight - helpful for seeing under the sink
• Rags or old towels - for cleaning and drying

When purchasing your replacement faucet, verify that it matches your sink's configuration. Check how many holes your sink has and what spacing exists between them. Measure the distance between the holes to ensure your new faucet will fit. Most sinks have either a single hole (for single-spout faucets), three holes (for widespread or centerset faucets), or four holes (for faucets with a separate sprayer). Taking accurate measurements prevents having to return the faucet or perform additional modifications to your sink.

Practical Takeaway: Gather all tools and materials before beginning. Create a checklist including your new faucet, plumber's tape, plumber's putty, basic hand tools, and safety items like a flashlight and towels. Having everything prepared reduces project time and frustration.

Removing Your Old Faucet Step by Step

Removing the old faucet is often the most time-consuming part of the replacement process. Take your time with this step to avoid damaging your sink or the surrounding area. Once the water supply is shut off and your supplies are gathered, you're ready to begin.

Free Guide to Educational Learning Resources →

Start by looking under the sink. You'll see water supply lines connected to the faucet. These are typically flexible tubes or rigid pipes. Use your adjustable wrench to loosen the nuts connecting these supply lines. Turn the nuts counterclockwise. Have your bucket or towel ready—some water will likely spill out as you disconnect these lines. It's normal for water to remain in the lines even after shutting off the valves.

Next, look at how the faucet is mounted. If your faucet has mounting nuts underneath the sink, use your wrench or basin wrench to loosen these. If mounting hardware is on top of the sink (less common in modern bathrooms), you may need to remove decorative caps or collars first. Some faucets have a single large nut, while others have two or more nuts securing different components. Remove all mounting hardware completely.

Once all connections are loosened and mounting hardware is removed, carefully lift the old faucet out of the sink. It may be stuck due to old caulk or plumber's putty. Gently wiggle it back and forth while pulling upward. If it's really stuck, use a putty knife to carefully break the seal around the base. Be patient during this step to avoid cracking your sink.

After removing the old faucet, clean the sink thoroughly. Use a putty knife to scrape away old caulk, plumber's putty, and debris. A clean surface is essential for proper installation of the new faucet. Wipe the area with a damp cloth and let it dry completely.

Practical Takeaway: Remove the old faucet by disconnecting water supply lines, removing mounting hardware, and gently lifting it out. Clean the sink surface completely afterward to prepare for the new installation.

Installing Your New Faucet

Installing the new faucet is often more straightforward than removal. Modern faucets typically come with clear instructions specific to their design. Read these instructions completely before beginning—each faucet model may have slightly different requirements.

Get Your Free Cumberland Senior Center Activities Guide →

Start by positioning the new faucet in the mounting holes. If your faucet comes with a rubber gasket or base plate, slide this onto the threaded studs first. The gasket creates a watertight seal between the faucet and sink. Align the faucet so it's centered and straight. This is important for both appearance and function.

From underneath the sink, slide any mounting washers onto the threaded studs. Then hand-tighten the mounting nuts. Start all nuts by hand before using your wrench. This prevents cross-threading, which occurs when the threaded parts don't line up properly and can damage the connection. Once all nuts are hand-tight, use your wrench to tighten them firmly. You want them snug but not over-tightened—over-tightening can crack your sink or damage the faucet. Tighten in an alternating pattern if there are multiple mounting points to ensure even pressure.

Next, connect the water supply lines. Your new faucet should have supply line connections, typically located at the base or underside. Most modern faucets use flexible supply lines with compression fittings. These connect to your home's shut-off valves. Wrap plumber's tape around the threaded connections (the male threads—the part that screws in) before connecting. Wrap the tape clockwise three to four times around the threads. This tape prevents leaks at threaded connections.

Hand-tighten the supply line nuts onto the shut-off valves, then use your wrench to tighten them an additional three-quarter turn. Don't over-tighten these connections—they don't need to be extremely tight to prevent leaks if you've applied plumber