Free Guide to Building Natural Swimming Pools

What Natural Swimming Pools Are and How They Work

A natural swimming pool, sometimes called a biological or ecological pool, is a body of water designed for swimming that uses plants and natural filtration instead of chemicals like chlorine. Unlike traditional pools that rely on pumps and chemical treatments to keep water clean, natural swimming pools mimic the way natural lakes and ponds maintain themselves through biological processes.

Free Guide to Taking Screenshots on Dell Chromebooks →

Natural swimming pools typically contain two distinct zones: a swimming area where you can dive and swim, and a regeneration zone filled with aquatic plants and gravel filtration. The regeneration zone may make up anywhere from 30 to 50 percent of the total pool surface area, depending on the design and climate. Water circulates between these zones through a biological filtration system. As water passes through the plant-filled regeneration area, beneficial bacteria and plants remove nutrients that would otherwise cause algae growth. The gravel and soil layers act as mechanical filters, trapping particles and debris.

The water quality in a natural swimming pool depends on several factors working together: plant growth, beneficial bacteria colonies, water circulation, and proper maintenance routines. The entire ecosystem must stay in balance. Too few plants and the pool cannot filter itself. Poor water circulation leads to stagnant areas. Inadequate maintenance allows debris to accumulate and disrupt the system. When properly designed and maintained, natural pools can remain crystal clear and safe for swimming year-round.

Practical Takeaway: Natural swimming pools work like self-cleaning ecosystems. Understanding that these pools require zones for plants, mechanical filtration, and continuous water movement helps explain why design and construction planning are crucial before you begin building.

Planning and Site Assessment for Your Natural Pool

Before breaking ground on a natural swimming pool, you need to evaluate your property carefully. The location, size, soil composition, sunlight exposure, and drainage patterns all affect whether your pool will function well and last for many years. Rushing through the planning phase often leads to costly mistakes and pools that struggle with water clarity or maintenance issues.

Learn About BMV Saturday Hours and Visit Planning →

Start by observing your yard throughout different seasons. Note where water collects after rain, which areas receive full sun versus shade, and how wind patterns affect different spots on your property. Natural pools require 4 to 6 hours of sunlight daily to allow plants to photosynthesize and produce oxygen, but excessive sun can promote algae growth if the filtration system cannot keep up. A location with morning sun and afternoon shade often works well. Pay attention to tree coverage—trees provide shade but their falling leaves will require more frequent skimming and maintenance.

Soil composition matters significantly. You'll need to understand whether your soil drains well or retains water. Heavy clay soils may require you to install a pond liner to prevent water loss or contamination from surrounding soil. Sandy soils drain quickly, which can be problematic if groundwater levels are high. Conduct a simple percolation test by digging a hole, filling it with water, and measuring how fast it drains. You can also contact your local extension office for professional soil testing, which typically costs between $25 and $75.

Consider the pool's proximity to your home, property lines, utilities, and neighbors. Most jurisdictions require pools to be set back from property lines by 5 to 10 feet, though regulations vary. Call your local utility locating service before planning excavation—hitting underground gas, electric, or water lines creates serious safety hazards. Also think about future maintenance access. You'll need space around the regeneration zone to trim plants and remove accumulated debris.

Practical Takeaway: Spend time observing your property over several weeks and gather information about soil type, drainage, sunlight, and site constraints. This groundwork prevents expensive corrections later and makes the construction phase much smoother.

Design Considerations and Pool Sizing

The design of your natural swimming pool determines how well it functions and how much maintenance you'll perform. Several design choices affect both the pool's appearance and its biological performance. Common design approaches include the classic separate-zone design with a distinct swimming area and regeneration area, the integrated design where plants are distributed throughout the pool, and the small backyard design suited for spaces under 300 square feet.

Free Guide to Online Membership and Dues Payment Portals →

Pool size directly impacts filtration capability and maintenance requirements. A general guideline suggests that the regeneration zone should occupy 30 to 50 percent of the total pool surface area. A 400-square-foot pool (roughly 20 feet by 20 feet) might have a 200-square-foot swimming area and a 200-square-foot plant zone. Smaller pools below 150 square feet struggle to maintain stable water quality because the biological ecosystem is too small to self-regulate effectively. Larger pools exceeding 1,000 square feet require more sophisticated water circulation systems and more extensive plant coverage.

Depth varies by intended use. A swimming area should reach 4 to 6 feet deep at its deepest point to allow diving and comfortable swimming. Shallow areas of 1 to 2 feet help swimmers safely enter and exit. The regeneration zone typically ranges from 2 to 4 feet deep. Deeper regeneration zones filter more effectively because water spends more time passing through soil layers and encountering bacteria colonies.

Shape influences water circulation and maintenance. Rectangular or oval shapes allow even water movement and are easier to maintain than irregular or highly curved designs. Corners and coves can develop dead zones where water doesn't circulate properly, potentially allowing stagnation and algae blooms. Some designers specify slightly sloped bottoms or raised edges in the regeneration zone to direct water flow efficiently.

The placement of water circulation returns and intake points affects the entire pool's function. Returns should spray water back into the swimming zone gently to avoid creating excessive currents that disturb swimmers. Intake points draw water from the pool's surface in the swimming area, where debris collects. This design prevents water from circulating in loops without properly filtering.

Practical Takeaway: Sketch out several design options for your space, ensuring your regeneration zone occupies at least 30 to 50 percent of the total area. Aim for a regular shape and adequate depth to support a healthy biological ecosystem and allow enjoyable swimming.

Construction Methods and Materials

Building a natural swimming pool involves multiple construction phases: excavation, creating the pool basin, installing filtration infrastructure, adding soil and plants, and establishing water circulation. Each phase requires specific materials and techniques to create a watertight structure that will function reliably for decades.

Learn About Pennsylvania Inspection and Emissions Testing Fees →

The pool basin can be constructed using several approaches. The most common method involves excavating the desired shape and installing a flexible pond liner made from high-density polyethylene (HDPE), rubber (EPDM), or PVC. Liners range from 0.5mm to 1.5mm thick. Thicker liners (1.0mm to 1.5mm) resist punctures and last longer—often 20 to 40 years depending on sun exposure and climate. Before placing the liner, you should remove sharp rocks and roots from the excavated basin, then add 2 to 4 inches of sand as a protective cushion underneath.

Alternative construction methods include concrete or block construction, which offers durability but requires careful waterproofing to prevent leaks. Some natural pool builders use clay compaction, especially in regions with heavy clay soil. This traditional method creates a clay seal that holds water, though it requires proper maintenance and may not work in areas with high groundwater or permeable soils.

The filtration system requires several components. A biological filter—typically gravel and sand layers in the regeneration zone—forms the primary filtration mechanism. Below the gravel, you'll install perforated pipes connected to a pump that circulates water. The pump should process the entire pool volume at least twice daily. For a 400-square-foot pool with an average depth of 3 feet (about 2,988 gallons), you'd want a pump that moves roughly 6,000 gallons per day. Pumps run on electric motors, typically using 0.5 to 2 horsepower depending on flow requirements and lift height.

Edging materials affect both aesthetics and function. Natural stone, timber, or poured concrete can frame the pool. The edging should extend slightly above water level (3 to 6 inches) to prevent surrounding soil and grass from washing into the pool during heavy rain. A small berm or raised edge around the regeneration zone helps direct water flow and prevents contaminants from the surrounding yard from entering the pool.

Materials for the regeneration zone include aquatic pl