Free Guide to Building a Chicken Coop With Pallets

Understanding Pallet Chicken Coops: Materials and Basic Concepts

A chicken coop built from pallets offers an affordable way to house backyard chickens. Pallets are wooden platforms typically used for shipping and storing goods in warehouses and retail stores. Many businesses discard pallets regularly, making them available for free or at minimal cost. Using pallets to construct a chicken coop reduces building expenses significantly compared to purchasing new lumber, which can cost $200 to $500 for a small coop.

Get Your Free Guide to Finding Top-Rated Schools →

Understanding pallet construction begins with knowing what you're working with. Standard pallets measure 48 inches long by 40 inches wide and vary in height from 3.5 to 6 inches. The wooden slats are typically made from hardwood or softwood, though hardwood pallets last longer when exposed to weather. Most pallets can support between 1,500 and 2,000 pounds, providing structural strength suitable for chicken coops.

Before collecting pallets, you should know what types exist. Heat-treated pallets marked with "HT" are safe for projects involving animals and food. Avoid pallets marked "MB," which indicates chemical treatment with methyl bromide. Chemical treatments can leach into soil where chickens scratch and peck. Treated pallets may cause respiratory issues or poisoning in birds.

The number of pallets needed depends on your coop design. A basic small coop housing 3 to 4 chickens requires 6 to 8 pallets. A larger run accommodating 8 to 10 chickens may need 12 to 16 pallets. Consider your flock size before starting the project—the average backyard chicken produces one egg every 24 to 26 hours, so three to four hens typically provide daily eggs for a household of two adults.

Practical Takeaway: Source heat-treated pallets from local businesses, warehouses, or online marketplaces. Inspect pallets for signs of damage, rot, or chemical marking before collection. Set aside 6 to 16 pallets depending on your planned coop size.

Tools and Safety Equipment You'll Need

Building a pallet chicken coop requires basic hand tools and power tools that most homeowners already own or can borrow. You don't need expensive equipment—the project uses standard carpentry tools. Having the right tools makes the work faster and safer, reducing the risk of injury during construction.

Learn How to Upload Audio to YouTube →

Essential hand tools include a hammer, a pry bar or crowbar for disassembling pallets, a tape measure, and a pencil for marking measurements. A circular saw or miter saw cuts pallets to length and width. A power drill with bits drives screws through wood and creates pilot holes. A level ensures walls and structures are plumb and square. A square checks that corners form 90-degree angles. A staple gun with staples attaches wire mesh or hardware cloth to wooden frames. These tools cost between $100 and $300 if purchased new, but most people already own them.

Personal protective equipment protects you during construction. Safety glasses shield eyes from wood chips, dust, and splinters. Work gloves protect hands when handling rough pallets and sharp nails. A dust mask prevents inhalation of sawdust, particularly important when cutting wood. Hearing protection like earplugs reduces noise from power tools, which typically operate between 80 and 100 decibels.

Additional supplies include nails, screws, wood stain or paint, hardware cloth or wire mesh, and wood sealant. Galvanized or stainless steel fasteners resist rust better than standard steel when exposed to moisture and chicken droppings. Exterior-grade paint or stain protects wood from weather and extends the coop's lifespan by several years. Hardware cloth with openings smaller than 1/4 inch prevents predators like weasels from entering while allowing ventilation. Budget $50 to $100 for these materials.

Practical Takeaway: Gather essential hand and power tools before starting. Wear safety glasses, gloves, and a dust mask during all cutting and assembly work. Invest in galvanized fasteners and hardware cloth rated for outdoor animal enclosures.

Step-by-Step Construction Process for a Basic Coop

Building a basic pallet coop follows a logical sequence: preparing pallets, constructing the frame, adding the roof, installing ventilation, and securing hardware cloth. This approach works whether you're building a stationary coop or a mobile one on wheels.

Get Your Free Walmart W2 Form Information Guide →

Begin by preparing your pallets. Disassemble pallets carefully using a pry bar to remove nails without splitting boards. A reciprocating saw quickly cuts through nails embedded in wood. Inspect all lumber for rot, damage, or pest infestation. Replace compromised boards with new lumber to ensure structural integrity. Sand rough surfaces where chickens might perch or roost to prevent splinters. Apply food-safe wood sealant to exterior surfaces that will weather.

Next, construct the base frame. Lay four pallets flat to create a rectangular foundation for your coop. Depending on your design, the foundation might measure 4 feet by 8 feet for a medium-sized coop. Screw the pallets together at corners using 3-inch galvanized screws—at least three screws per corner to resist stress. Ensure the base is level using a 2-foot level placed on multiple sides. An unlevel base causes doors to swing shut on their own and allows predators to create gaps underneath.

Build vertical walls by standing pallets or pallet boards upright on the foundation and securing them together. A coop with 24 to 30 inches of height provides adequate space for chickens to move without excessive wasted space that becomes difficult to heat in winter. Stack pallets or boards two deep if using standard pallets, creating walls about 8 inches thick. Secure corners with corner braces or 2x4 lumber screwed through multiple boards. The wooden box should be rigid enough that pushing on walls produces no movement.

Create a roof using pallet wood or new lumber arranged in a peaked or flat design. A peaked roof sheds rain more effectively and provides superior ventilation. Angle roof panels at least 30 degrees from horizontal. Cover roof seams with roofing felt or drip edge flashing to direct water away from walls. A metal roof material outlasts asphalt shingles in wet climates, though it costs more initially. Ensure overhangs extend at least 6 inches beyond walls to protect the wood from rain damage.

Install ventilation by creating openings in upper wall sections or roof areas. Chickens produce moisture through respiration and droppings, and inadequate ventilation leads to respiratory illness and mold growth. Position vents so prevailing winter winds don't blow directly into the coop. Cover vents with hardware cloth or predator-proof grates that allow airflow while preventing entry by raccoons, owls, or hawks. Aim for ventilation openings totaling at least 1 square foot per chicken in the flock.

Finally, secure hardware cloth to all exterior surfaces where needed. Attach mesh to window openings, ventilation grates, and run areas using staples or small nails. Bury hardware cloth 6 inches deep around the perimeter if the coop sits on ground rather than elevated on legs. This prevents digging predators like foxes and groundhogs from entering from below. A properly constructed coop should have no gaps larger than 1/4 inch anywhere in the structure.

Practical Takeaway: Disassemble pallets carefully, construct a level foundation, build walls at least 24 inches tall, add a peaked roof with overhangs, include upper ventilation openings, and secure all exterior surfaces with hardware cloth.

Interior Layout: Nesting Boxes, Roosts, and Flooring

The interior design of your coop affects the health, comfort, and productivity of your chickens. Most chickens spend roughly 8 hours daily inside the coop, and good interior design reduces stress, illness, and aggression among birds. Proper layout also makes daily maintenance faster and simpler.

How to Pay Your Waste Management Bill →

Nesting boxes are essential for egg-laying hens. Each box should measure approximately 12 inches wide by 12 inches deep by 14 inches tall—about the size of a storage crate. Provide one nesting box for every three hens in your flock. A flock of six chickens needs