Free Guide to AC Problems and What They Mean

Common AC Problems and How to Spot Them

Air conditioning systems have several parts that work together to keep your home cool. When something goes wrong, your AC usually shows warning signs before it stops working completely. Learning to recognize these signs can help you understand what might be happening and whether you need to call a professional.

Get Your Free Phone IMEI Number Guide →

One of the most common problems is reduced cooling. If your AC is running but your home isn't getting as cold as it should be, several things could be causing this. The outdoor temperature might be affecting how well your system works—most AC units struggle when it's above 95 degrees Fahrenheit. Indoor humidity levels also matter. If your air feels cool but still muggy, your system might not be removing moisture properly from the air.

Strange noises are another sign that something needs attention. Normal AC operation produces a consistent humming sound. However, if you hear squealing, grinding, rattling, or clanking sounds, this usually means something is loose, worn out, or broken. A squealing noise often points to belt problems, while grinding sounds may indicate motor issues. Rattling can mean loose components inside the unit or debris caught in the fan.

Leaking water around your AC unit is also common. Some water drainage is normal—AC systems naturally produce condensation as they cool air. However, if you see puddles forming inside your home or water pooling around the outdoor unit, a drain line might be clogged or damaged. This can happen when algae, dirt, or mold builds up in the condensation drain line over time.

Other warning signs include a burning smell, which can indicate electrical issues or overheating; warm air coming from vents instead of cool air; or the system cycling on and off frequently without cooling the home properly. Your AC might also refuse to turn on at all, which could be an electrical problem or a tripped circuit breaker.

Takeaway: Pay attention to changes in how your AC sounds, feels, and performs. Keep track of when problems started and what conditions made them worse. This information helps you describe the issue clearly if you need to call for repairs.

Understanding Refrigerant and Low Charge Issues

Refrigerant is the liquid substance that circulates through your AC system and does the actual cooling work. Think of it like blood in a human body—it travels through pipes and absorbs heat from inside your home, then releases that heat outside. Without the right amount of refrigerant, your system cannot cool properly, no matter how hard it runs.

Get Your Free Unemployment Services Information Guide →

The most common refrigerant problem is a low charge, which means your system doesn't have enough refrigerant in it. A low charge can happen for two main reasons: a leak somewhere in the system, or the system was not filled correctly when it was installed. Modern AC systems are sealed, so they should never lose refrigerant under normal circumstances. If your system is low on refrigerant, that means there's likely a leak somewhere.

Signs of low refrigerant include reduced cooling power, higher electric bills because your system runs longer trying to cool your home, ice buildup on the indoor unit or copper pipes, and hissing sounds that suggest refrigerant is escaping. Some people also notice that their AC system runs constantly but never reaches the desired temperature.

Finding a refrigerant leak requires professional equipment and training. HVAC technicians use dyes and electronic leak detectors to locate where refrigerant is escaping. Once they find the leak, they fix it by sealing the hole or replacing the damaged component, then refill the system with the correct amount of refrigerant. The type of refrigerant matters—older systems might use R-22 (also called Freon), while newer systems typically use R-410A. Using the wrong type can damage your system.

It's important to note that simply adding more refrigerant without fixing the leak is not a real solution. Your system will eventually become low again. The EPA regulates refrigerant handling, so only certified technicians can buy and work with it. This is one reason why AC repair costs can be significant—proper refrigerant service requires specialized knowledge and tools.

The Environmental Protection Agency has phased out R-22 refrigerant because it damages the ozone layer. If your older system uses R-22, you still have options, but R-22 prices have increased as supplies become scarcer. Some homeowners eventually choose to replace their entire system with a newer model that uses approved refrigerants, though this is a major investment.

Takeaway: Low refrigerant is a symptom of a leak, not a cause. Fixing the problem means finding and sealing the leak, not just refilling the system. If your AC seems to need refrigerant regularly, you likely have a leak that needs professional attention.

Electrical Problems and System Failures

Your AC system runs on electricity, so electrical problems can prevent it from working at all. Understanding basic electrical issues can help you troubleshoot before calling for service and might save you a service call fee in some cases.

How to Troubleshoot Your Washer Lock →

The first thing to check when your AC won't turn on is whether power is actually reaching the unit. Check your home's electrical panel (circuit breaker box) to see if the breaker for your AC system has tripped. A tripped breaker looks like it's in the middle position on the switch—it's neither fully on nor fully off. If it's tripped, flip it fully off, wait a few seconds, then flip it back on. If it trips again immediately, there's an electrical problem that needs professional service. If it stays on and your AC works, the problem might have been a temporary surge.

Another electrical component to know about is the capacitor. Capacitors store electrical energy and help start the compressor and fan motors. When a capacitor fails, the system usually won't start at all, or the outdoor unit might hum without the compressor actually running. Capacitors typically last 10-15 years and are relatively inexpensive to replace, making this one of the more affordable repairs.

Thermostat problems can also prevent your system from turning on. Many thermostat issues come from dead batteries. If your thermostat is battery-operated, try replacing the batteries first. If that doesn't work, the thermostat itself might be broken. Digital thermostats sometimes need to be reset by turning off the breaker for a few minutes, then turning it back on—this is similar to restarting a computer.

Electrical problems can also cause reduced cooling without complete system failure. High electrical resistance in connections can cause the compressor to overheat and shut itself off as a safety measure. You might notice your system works fine in the morning but shuts down when it gets very hot outside. This protection mechanism prevents fire and damage, but it also means your home won't cool when you need it most.

Power surges from lightning or utility problems can damage electrical components in your AC system. If your AC stops working right after a storm or power outage, there's likely electrical damage. Some homeowners use surge protectors on their outdoor AC units to prevent this, though these aren't guaranteed to prevent all damage.

Takeaway: Always check your breaker first if your AC won't turn on. If it's not a breaker issue, call a professional because electrical problems require specialized testing equipment to diagnose safely.

Clogged Air Filters and Airflow Problems

Your AC's air filter does important work. As air moves through your system, the filter catches dust, pollen, pet hair, and other particles. Over time, these particles build up and clog the filter. A clogged filter restricts airflow, making your system work harder, reducing cooling power, and wasting electricity. Dirty filters are one of the most common AC problems, and they're also the easiest to prevent.

Get Your Free State Unemployment Insurance Information Guide →

Most air filters should be replaced every one to three months, depending on factors like pets, allergies, and how dusty your home is. If you have pets or someone in your home has allergies, check your filter monthly. Filters are inexpensive—usually between five and twenty dollars—and changing them takes just a few minutes. This is one maintenance task most homeowners can do themselves.

Signs of a clogged filter include reduced airflow from your vents, higher energy bills because your system runs longer, and weak cooling. You can check your filter by looking at it in bright light. If you can't see light through it, it's clogged and needs replacing. A clogged filter can also cause your system to freeze up. When airflow is restricted, the indoor co