Find Your Super Tech Oil Filter by Vehicle

Understanding Oil Filter Basics and Why They Matter

An oil filter is one of the most important maintenance components in your vehicle's engine. Its primary job is to remove contaminants from your engine oil as it circulates through the engine. These contaminants include dirt particles, metal fragments from engine wear, and other debris that accumulate over time. Without a functioning oil filter, these particles would remain in your oil and cause accelerated engine wear, reducing your vehicle's lifespan and performance.

Free Guide to Unlocking Doors Without Keys →

Engine oil naturally collects debris as it moves through various engine components. The filter traps these particles in a specially designed material, typically made of synthetic fibers or cellulose. Over time, the filter becomes saturated with trapped contaminants and loses its effectiveness. This is why regular oil filter replacements are essential—most manufacturers recommend changing your oil filter every 3,000 to 10,000 miles, depending on your vehicle and driving conditions.

Different vehicles require different filter specifications. Your vehicle's make, model, year, and engine type all determine which filter will work correctly. Using the wrong filter can result in poor filtration, leaks, or damage to your engine. The filter must fit properly on your engine's filter housing, have the correct thread size, and be rated to handle your vehicle's oil flow requirements.

Understanding your specific vehicle's oil filter needs prevents costly mistakes. Super Tech oil filters are manufactured to meet vehicle specifications across various makes and models. Before purchasing any filter, you should know your vehicle's exact year, make, model, and engine size. This information typically appears in your owner's manual or on your vehicle's information label located on the driver's side door jamb.

Practical Takeaway: Locate your vehicle's year, make, model, and engine size before shopping for an oil filter. Check your owner's manual or the door jamb label. This single step prevents purchasing incompatible filters and ensures proper engine protection.

How to Identify Your Vehicle Information

Finding your vehicle's exact specifications is the first step toward selecting the correct Super Tech oil filter. Your vehicle identification number, or VIN, contains all the information manufacturers use to determine correct parts. The VIN is a 17-character code that serves as your vehicle's unique identifier. You can find it in several locations: on the dashboard near the windshield on the driver's side, on your vehicle registration documents, on your insurance documents, or on the door jamb of the driver's side door.

Learn About Booking Your New York DMV Appointment Online →

Your owner's manual is one of the most reliable sources for oil filter specifications. This manual contains detailed maintenance schedules and parts specifications specific to your vehicle. Most manuals include a section on recommended oil filters, including the original equipment manufacturer (OEM) part number and compatible aftermarket alternatives. If you don't have a physical copy, many manufacturers provide digital versions on their websites that you can access using your VIN.

The driver's side door jamb label provides crucial vehicle information in an easy-to-read format. This label typically displays your vehicle's year, make, model, engine type, and manufacturing specifications. Some labels even include the original oil filter part number. This label remains on your vehicle throughout its life and serves as a permanent reference for maintenance needs.

When examining your engine compartment, you'll notice the current oil filter attached to your engine block. You can photograph this filter or note its part number, which is printed on the filter itself. This number provides valuable information about what type of filter your engine currently uses. Many vehicle owners simply replace their filters with the same type that was previously installed, which is generally a safe approach.

Practical Takeaway: Gather three pieces of information: your VIN (from dashboard or registration), your vehicle's year/make/model (from door jamb label), and your current oil filter's part number (from the filter itself or owner's manual). Write these down before shopping.

Understanding Super Tech Filter Product Lines and Specifications

Super Tech manufactures oil filters across several product tiers, each designed to meet different performance standards and price points. The Standard line represents the entry-level option, meeting minimum OEM specifications for filtration and flow. These filters are designed for vehicles under normal driving conditions and provide adequate protection at an economical price. The Standard line includes filters for most common domestic and import vehicles.

Learn About Boric Acid for Roach Control →

The Super Tech Premium line offers enhanced filtration capabilities compared to standard filters. Premium filters typically feature improved media that captures smaller particles while maintaining optimal oil flow rates. These filters are rated to handle synthetic oils and extend intervals between changes in many cases. Premium filters often include anti-drain-back valves that prevent oil starvation during cold starts and bypass valves that protect your engine during extreme temperatures.

Super Tech synthetic oil filters represent the highest performance tier. These filters use advanced synthetic materials that resist degradation better than traditional media. Synthetic filters maintain their filtration efficiency longer and can handle extended oil change intervals when used with synthetic motor oil. They're particularly beneficial for high-performance vehicles, turbocharged engines, or vehicles operated in severe conditions.

Each Super Tech filter product line comes in various sizes to accommodate different engine configurations. Common filter sizes include 3/4-inch, 20-millimeter, and 22-millimeter thread sizes. Bypass valve settings vary based on engine requirements, typically ranging from 7 to 12 PSI differential. The collapse rating—the pressure at which the bypass valve opens—ensures your engine receives oil protection even when the filter becomes loaded with contaminants.

Super Tech filters carry certification marks indicating they meet or exceed industry standards. Look for markings such as API (American Petroleum Institute) certification and OEM approvals for specific vehicle manufacturers. These certifications indicate the filter has undergone testing for filtration efficiency, flow rate, and structural integrity.

Practical Takeaway: Match your vehicle's needs to a Super Tech product tier. Standard filters work for typical driving conditions, Premium filters offer better protection, and Synthetic filters provide maximum performance and longer service life. Check your vehicle's owner's manual to see if your manufacturer recommends synthetic filter capabilities.

Matching Filter Specifications to Your Vehicle

Once you've gathered your vehicle information, the next step involves matching filter specifications to your engine's requirements. Super Tech offers multiple filters for most vehicle makes and models, and choosing the correct one depends on understanding several key specifications. The thread size must match exactly—using an incorrect thread size can result in leaks or improper installation. Common sizes include M20x1.5, M22x1.5, and 3/4-inch NPT, each designed for specific engine blocks.

Free Guide to New Jersey DMV Online Accounts →

Bypass valve settings directly impact engine protection. This valve opens when oil pressure exceeds a certain threshold, allowing oil to bypass the filter media if it becomes too restrictive. For example, a 7 PSI bypass valve opens at lower pressure than a 10 PSI valve. Your vehicle's engine requires a specific bypass setting to maintain proper oil circulation without forcing unfiltered oil through the engine. Selecting the wrong bypass setting can reduce filtration effectiveness or create excessive pressure.

Anti-drain-back valves prevent oil from draining out of the filter into the oil pan when the engine is off. This feature keeps oil in the filter and upper engine components, providing faster lubrication during cold starts. Most modern vehicles benefit from this feature, though older vehicles may not require it. Super Tech filters across all product lines include this feature as standard equipment.

Filter media efficiency ratings indicate what percentage of particles above a certain micron size the filter captures. A typical oil filter with 98% efficiency at 20 microns means it removes 98 particles out of every 100 particles that are 20 microns or larger. Standard filters typically achieve 98-99% efficiency, while premium and synthetic filters often exceed this performance. Higher efficiency captures more contaminants but can also cause faster filter loading.

The flow rate capacity determines how much oil the filter can process per minute. A typical automotive oil filter flows 20-40 gallons per minute, depending on design. Your vehicle's engine oil circulation system operates at a specific flow rate, and the filter must accommodate this rate without creating excessive back-pressure. Selecting a filter with insufficient flow capacity can starve your engine of oil during high-demand situations.

Practical Takeaway: Create a checklist of required specifications: thread size, bypass valve setting (PSI), anti-drain-back valve presence, and approximate flow rate capacity. Match each specification to your vehicle's requirements listed in your owner's manual before selecting a Super Tech filter.

Where to Find Super Tech Filters and How to Verify Compatibility

Super Tech oil filters are

Information Guide to Railroad Retirement Board Phone Numbers →